DEŽELAK, Ferdinand . Some Analytical Aspects of Room Acoustic. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 45, n.3, p. 109-113, november 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/some-analytical-aspects-of-room-acoustic/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Deželak, F. (1999). Some Analytical Aspects of Room Acoustic. Strojniški vestnik - Journal of Mechanical Engineering, 45(3), 109-113. doi:http://dx.doi.org/
@article{.,
author = {Ferdinand Deželak},
title = {Some Analytical Aspects of Room Acoustic},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {45},
number = {3},
year = {1999},
keywords = {room-acoustic; absorbers; noise reduction; sound pressure; },
abstract = {When choosing new machinery, equipment and installations, consideration must be given to the noise disturbance that it could produce. Some manufacturers of noisy equipment demand good sound absorption characteristics in workshops when installing such machinery. This requirement is set in order to reduce the reverberant portion of the total sound pressure level and thus to prevent high overall noise levels. A low reverberation time or a sufficient drop in the sound pressure level with distance is required, and this can be achieved by properly setting up absorbing material within a room. However, noise reduction by sound absorption alone will seldom prove completely satisfactory, especially close to a noise source, since only the reverberant portion can be reduced by placing absorbing materials on the surfaces of the room. In this paper analytical investigations are given of some conditions under which the treatment of workshops is still practical.},
issn = {0039-2480}, pages = {109-113}, doi = {},
url = {https://www.sv-jme.eu/article/some-analytical-aspects-of-room-acoustic/}
}
Deželak, F. 1999 November 45. Some Analytical Aspects of Room Acoustic. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 45:3
%A Deželak, Ferdinand %D 1999 %T Some Analytical Aspects of Room Acoustic %B 1999 %9 room-acoustic; absorbers; noise reduction; sound pressure; %! Some Analytical Aspects of Room Acoustic %K room-acoustic; absorbers; noise reduction; sound pressure; %X When choosing new machinery, equipment and installations, consideration must be given to the noise disturbance that it could produce. Some manufacturers of noisy equipment demand good sound absorption characteristics in workshops when installing such machinery. This requirement is set in order to reduce the reverberant portion of the total sound pressure level and thus to prevent high overall noise levels. A low reverberation time or a sufficient drop in the sound pressure level with distance is required, and this can be achieved by properly setting up absorbing material within a room. However, noise reduction by sound absorption alone will seldom prove completely satisfactory, especially close to a noise source, since only the reverberant portion can be reduced by placing absorbing materials on the surfaces of the room. In this paper analytical investigations are given of some conditions under which the treatment of workshops is still practical. %U https://www.sv-jme.eu/article/some-analytical-aspects-of-room-acoustic/ %0 Journal Article %R %& 109 %P 5 %J Strojniški vestnik - Journal of Mechanical Engineering %V 45 %N 3 %@ 0039-2480 %8 2017-11-03 %7 2017-11-03
Deželak, Ferdinand. "Some Analytical Aspects of Room Acoustic." Strojniški vestnik - Journal of Mechanical Engineering [Online], 45.3 (1999): 109-113. Web. 19 Nov. 2024
TY - JOUR AU - Deželak, Ferdinand PY - 1999 TI - Some Analytical Aspects of Room Acoustic JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - room-acoustic; absorbers; noise reduction; sound pressure; N2 - When choosing new machinery, equipment and installations, consideration must be given to the noise disturbance that it could produce. Some manufacturers of noisy equipment demand good sound absorption characteristics in workshops when installing such machinery. This requirement is set in order to reduce the reverberant portion of the total sound pressure level and thus to prevent high overall noise levels. A low reverberation time or a sufficient drop in the sound pressure level with distance is required, and this can be achieved by properly setting up absorbing material within a room. However, noise reduction by sound absorption alone will seldom prove completely satisfactory, especially close to a noise source, since only the reverberant portion can be reduced by placing absorbing materials on the surfaces of the room. In this paper analytical investigations are given of some conditions under which the treatment of workshops is still practical. UR - https://www.sv-jme.eu/article/some-analytical-aspects-of-room-acoustic/
@article{{}{.},
author = {Deželak, F.},
title = {Some Analytical Aspects of Room Acoustic},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {45},
number = {3},
year = {1999},
doi = {},
url = {https://www.sv-jme.eu/article/some-analytical-aspects-of-room-acoustic/}
}
TY - JOUR AU - Deželak, Ferdinand PY - 2017/11/03 TI - Some Analytical Aspects of Room Acoustic JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 45, No 3 (1999): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - room-acoustic, absorbers, noise reduction, sound pressure, N2 - When choosing new machinery, equipment and installations, consideration must be given to the noise disturbance that it could produce. Some manufacturers of noisy equipment demand good sound absorption characteristics in workshops when installing such machinery. This requirement is set in order to reduce the reverberant portion of the total sound pressure level and thus to prevent high overall noise levels. A low reverberation time or a sufficient drop in the sound pressure level with distance is required, and this can be achieved by properly setting up absorbing material within a room. However, noise reduction by sound absorption alone will seldom prove completely satisfactory, especially close to a noise source, since only the reverberant portion can be reduced by placing absorbing materials on the surfaces of the room. In this paper analytical investigations are given of some conditions under which the treatment of workshops is still practical. UR - https://www.sv-jme.eu/article/some-analytical-aspects-of-room-acoustic/
Deželak, Ferdinand"Some Analytical Aspects of Room Acoustic" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 45 Number 3 (03 November 2017)
Strojniški vestnik - Journal of Mechanical Engineering 45(1999)3, 109-113
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
When choosing new machinery, equipment and installations, consideration must be given to the noise disturbance that it could produce. Some manufacturers of noisy equipment demand good sound absorption characteristics in workshops when installing such machinery. This requirement is set in order to reduce the reverberant portion of the total sound pressure level and thus to prevent high overall noise levels. A low reverberation time or a sufficient drop in the sound pressure level with distance is required, and this can be achieved by properly setting up absorbing material within a room. However, noise reduction by sound absorption alone will seldom prove completely satisfactory, especially close to a noise source, since only the reverberant portion can be reduced by placing absorbing materials on the surfaces of the room. In this paper analytical investigations are given of some conditions under which the treatment of workshops is still practical.