Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation

2480 Views
3002 Downloads
Export citation: ABNT
JIAO, XiaoYang ;LIU, GuoJun ;LIU, JianFang ;LI, Xinbo ;LIU, XiaoLun ;LU, Song .
Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 59, n.12, p. 763-771, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/research-on-levitation-coupled-with-standing-wave-levitation-and-electromagnetic-levitation/>. Date accessed: 23 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2013.1093.
Jiao, X., Liu, G., Liu, J., Li, X., Liu, X., & Lu, S.
(2013).
Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation.
Strojniški vestnik - Journal of Mechanical Engineering, 59(12), 763-771.
doi:http://dx.doi.org/10.5545/sv-jme.2013.1093
@article{sv-jmesv-jme.2013.1093,
	author = {XiaoYang  Jiao and GuoJun  Liu and JianFang  Liu and Xinbo  Li and XiaoLun  Liu and Song  Lu},
	title = {Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {59},
	number = {12},
	year = {2013},
	keywords = {standing wave levitation;ANSYS simulation;electromagnetic levitation;non-contact cooling},
	abstract = {In order to solve the problem caused by metal materials' inability to be cooled without contact with other materials after being heated by electromagnetic levitation, a new method is proposed: using a standing wave levitator to levitate the melted metal. The standing wave levitator adopts a concave spherical surface on the emitter and the reflector. Using ANSYS software, the transducer and the standing wave fields were simulated. Based on the simulation, the distribution and the maximum acoustic pressure with different radii of the concave spherical surface on the emitter and the reflector can be obtained, from which the optimal radius was determined. Based on the optimisation, a prototype of a standing wave levitation device was designed and manufactured. Levitation experiments for light and heavy specimens were carried out. It is shown that steel balls can be levitated stably when the distance between the emitter and the reflector is two times that of the wavelength. Next, the standing wave levitator was used in an attempt to levitate a steel ball of 5 mm in diameter after being non-contact heated by electromagnetic levitation. The results show that the method utilising a standing wave levitator to levitate and cool the metal materials after being non-contact heated by the electromagnetic levitation is feasible at this preliminary state.},
	issn = {0039-2480},	pages = {763-771},	doi = {10.5545/sv-jme.2013.1093},
	url = {https://www.sv-jme.eu/article/research-on-levitation-coupled-with-standing-wave-levitation-and-electromagnetic-levitation/}
}
Jiao, X.,Liu, G.,Liu, J.,Li, X.,Liu, X.,Lu, S.
2013 June 59. Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 59:12
%A Jiao, XiaoYang 
%A Liu, GuoJun 
%A Liu, JianFang 
%A Li, Xinbo 
%A Liu, XiaoLun 
%A Lu, Song 
%D 2013
%T Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation
%B 2013
%9 standing wave levitation;ANSYS simulation;electromagnetic levitation;non-contact cooling
%! Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation
%K standing wave levitation;ANSYS simulation;electromagnetic levitation;non-contact cooling
%X In order to solve the problem caused by metal materials' inability to be cooled without contact with other materials after being heated by electromagnetic levitation, a new method is proposed: using a standing wave levitator to levitate the melted metal. The standing wave levitator adopts a concave spherical surface on the emitter and the reflector. Using ANSYS software, the transducer and the standing wave fields were simulated. Based on the simulation, the distribution and the maximum acoustic pressure with different radii of the concave spherical surface on the emitter and the reflector can be obtained, from which the optimal radius was determined. Based on the optimisation, a prototype of a standing wave levitation device was designed and manufactured. Levitation experiments for light and heavy specimens were carried out. It is shown that steel balls can be levitated stably when the distance between the emitter and the reflector is two times that of the wavelength. Next, the standing wave levitator was used in an attempt to levitate a steel ball of 5 mm in diameter after being non-contact heated by electromagnetic levitation. The results show that the method utilising a standing wave levitator to levitate and cool the metal materials after being non-contact heated by the electromagnetic levitation is feasible at this preliminary state.
%U https://www.sv-jme.eu/article/research-on-levitation-coupled-with-standing-wave-levitation-and-electromagnetic-levitation/
%0 Journal Article
%R 10.5545/sv-jme.2013.1093
%& 763
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 59
%N 12
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28
Jiao, XiaoYang, GuoJun  Liu, JianFang  Liu, Xinbo  Li, XiaoLun  Liu, & Song  Lu.
"Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation." Strojniški vestnik - Journal of Mechanical Engineering [Online], 59.12 (2013): 763-771. Web.  23 Dec. 2024
TY  - JOUR
AU  - Jiao, XiaoYang 
AU  - Liu, GuoJun 
AU  - Liu, JianFang 
AU  - Li, Xinbo 
AU  - Liu, XiaoLun 
AU  - Lu, Song 
PY  - 2013
TI  - Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1093
KW  - standing wave levitation;ANSYS simulation;electromagnetic levitation;non-contact cooling
N2  - In order to solve the problem caused by metal materials' inability to be cooled without contact with other materials after being heated by electromagnetic levitation, a new method is proposed: using a standing wave levitator to levitate the melted metal. The standing wave levitator adopts a concave spherical surface on the emitter and the reflector. Using ANSYS software, the transducer and the standing wave fields were simulated. Based on the simulation, the distribution and the maximum acoustic pressure with different radii of the concave spherical surface on the emitter and the reflector can be obtained, from which the optimal radius was determined. Based on the optimisation, a prototype of a standing wave levitation device was designed and manufactured. Levitation experiments for light and heavy specimens were carried out. It is shown that steel balls can be levitated stably when the distance between the emitter and the reflector is two times that of the wavelength. Next, the standing wave levitator was used in an attempt to levitate a steel ball of 5 mm in diameter after being non-contact heated by electromagnetic levitation. The results show that the method utilising a standing wave levitator to levitate and cool the metal materials after being non-contact heated by the electromagnetic levitation is feasible at this preliminary state.
UR  - https://www.sv-jme.eu/article/research-on-levitation-coupled-with-standing-wave-levitation-and-electromagnetic-levitation/
@article{{sv-jme}{sv-jme.2013.1093},
	author = {Jiao, X., Liu, G., Liu, J., Li, X., Liu, X., Lu, S.},
	title = {Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {59},
	number = {12},
	year = {2013},
	doi = {10.5545/sv-jme.2013.1093},
	url = {https://www.sv-jme.eu/article/research-on-levitation-coupled-with-standing-wave-levitation-and-electromagnetic-levitation/}
}
TY  - JOUR
AU  - Jiao, XiaoYang 
AU  - Liu, GuoJun 
AU  - Liu, JianFang 
AU  - Li, Xinbo 
AU  - Liu, XiaoLun 
AU  - Lu, Song 
PY  - 2018/06/28
TI  - Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 59, No 12 (2013): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1093
KW  - standing wave levitation,ANSYS simulation,electromagnetic levitation,non-contact cooling
N2  - In order to solve the problem caused by metal materials' inability to be cooled without contact with other materials after being heated by electromagnetic levitation, a new method is proposed: using a standing wave levitator to levitate the melted metal. The standing wave levitator adopts a concave spherical surface on the emitter and the reflector. Using ANSYS software, the transducer and the standing wave fields were simulated. Based on the simulation, the distribution and the maximum acoustic pressure with different radii of the concave spherical surface on the emitter and the reflector can be obtained, from which the optimal radius was determined. Based on the optimisation, a prototype of a standing wave levitation device was designed and manufactured. Levitation experiments for light and heavy specimens were carried out. It is shown that steel balls can be levitated stably when the distance between the emitter and the reflector is two times that of the wavelength. Next, the standing wave levitator was used in an attempt to levitate a steel ball of 5 mm in diameter after being non-contact heated by electromagnetic levitation. The results show that the method utilising a standing wave levitator to levitate and cool the metal materials after being non-contact heated by the electromagnetic levitation is feasible at this preliminary state.
UR  - https://www.sv-jme.eu/article/research-on-levitation-coupled-with-standing-wave-levitation-and-electromagnetic-levitation/
Jiao, XiaoYang, Liu, GuoJun, Liu, JianFang, Li, Xinbo, Liu, XiaoLun, AND Lu, Song.
"Research on Levitation Coupled with Standing Wave Levitation and Electromagnetic Levitation" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 59 Number 12 (28 June 2018)

Authors

Affiliations

  • Jilin University, College of Mechanical Science and Engineering, China 1
  • Jilin University, School of Communication Engineering, China 2

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 59(2013)12, 763-771
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2013.1093

In order to solve the problem caused by metal materials' inability to be cooled without contact with other materials after being heated by electromagnetic levitation, a new method is proposed: using a standing wave levitator to levitate the melted metal. The standing wave levitator adopts a concave spherical surface on the emitter and the reflector. Using ANSYS software, the transducer and the standing wave fields were simulated. Based on the simulation, the distribution and the maximum acoustic pressure with different radii of the concave spherical surface on the emitter and the reflector can be obtained, from which the optimal radius was determined. Based on the optimisation, a prototype of a standing wave levitation device was designed and manufactured. Levitation experiments for light and heavy specimens were carried out. It is shown that steel balls can be levitated stably when the distance between the emitter and the reflector is two times that of the wavelength. Next, the standing wave levitator was used in an attempt to levitate a steel ball of 5 mm in diameter after being non-contact heated by electromagnetic levitation. The results show that the method utilising a standing wave levitator to levitate and cool the metal materials after being non-contact heated by the electromagnetic levitation is feasible at this preliminary state.

standing wave levitation;ANSYS simulation;electromagnetic levitation;non-contact cooling