KULEKCI, Mustafa Kemal. Process and apparatus developments in dry-machining applications. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 53, n.9, p. 541-547, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/process-and-apparatus-developments-in-dry-machining-applications/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Kulekci, M. (2007). Process and apparatus developments in dry-machining applications. Strojniški vestnik - Journal of Mechanical Engineering, 53(9), 541-547. doi:http://dx.doi.org/
@article{.,
author = {Mustafa Kemal Kulekci},
title = {Process and apparatus developments in dry-machining applications},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {53},
number = {9},
year = {2007},
keywords = {dry machining; coatings; cutting inserts; tool life; },
abstract = {In this study a recent development in the dry-machining process is discussed. Dry machining eliminates the Problems of cutting-fluid contamination, disposal, filtrations and the risk of health problems. The suitability of the workpiece for dry machining depends on the material's properties. The performance of the cutting tool for the dry-machining process depends on the properties of the coating. The process also has a restriction that must be taken into consideration: the rapid, repetitive fluctuations of the temperature lead to expansion, contraction and an increased risk of thermal cracking of the cutting edge. The presence of the coolant exacerbates the thermal cracking problem. Dry machining keeps the tool hot and tougher During the dry-machining process the coating takes the place of the coolant in protecting the cutting edges from wear and ensures reliable chip evacuation. Additional studies are needed on the dry-drilling and taping process for long chipping materials. },
issn = {0039-2480}, pages = {541-547}, doi = {},
url = {https://www.sv-jme.eu/article/process-and-apparatus-developments-in-dry-machining-applications/}
}
Kulekci, M. 2007 August 53. Process and apparatus developments in dry-machining applications. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 53:9
%A Kulekci, Mustafa Kemal %D 2007 %T Process and apparatus developments in dry-machining applications %B 2007 %9 dry machining; coatings; cutting inserts; tool life; %! Process and apparatus developments in dry-machining applications %K dry machining; coatings; cutting inserts; tool life; %X In this study a recent development in the dry-machining process is discussed. Dry machining eliminates the Problems of cutting-fluid contamination, disposal, filtrations and the risk of health problems. The suitability of the workpiece for dry machining depends on the material's properties. The performance of the cutting tool for the dry-machining process depends on the properties of the coating. The process also has a restriction that must be taken into consideration: the rapid, repetitive fluctuations of the temperature lead to expansion, contraction and an increased risk of thermal cracking of the cutting edge. The presence of the coolant exacerbates the thermal cracking problem. Dry machining keeps the tool hot and tougher During the dry-machining process the coating takes the place of the coolant in protecting the cutting edges from wear and ensures reliable chip evacuation. Additional studies are needed on the dry-drilling and taping process for long chipping materials. %U https://www.sv-jme.eu/article/process-and-apparatus-developments-in-dry-machining-applications/ %0 Journal Article %R %& 541 %P 7 %J Strojniški vestnik - Journal of Mechanical Engineering %V 53 %N 9 %@ 0039-2480 %8 2017-08-18 %7 2017-08-18
Kulekci, Mustafa. "Process and apparatus developments in dry-machining applications." Strojniški vestnik - Journal of Mechanical Engineering [Online], 53.9 (2007): 541-547. Web. 19 Nov. 2024
TY - JOUR AU - Kulekci, Mustafa Kemal PY - 2007 TI - Process and apparatus developments in dry-machining applications JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - dry machining; coatings; cutting inserts; tool life; N2 - In this study a recent development in the dry-machining process is discussed. Dry machining eliminates the Problems of cutting-fluid contamination, disposal, filtrations and the risk of health problems. The suitability of the workpiece for dry machining depends on the material's properties. The performance of the cutting tool for the dry-machining process depends on the properties of the coating. The process also has a restriction that must be taken into consideration: the rapid, repetitive fluctuations of the temperature lead to expansion, contraction and an increased risk of thermal cracking of the cutting edge. The presence of the coolant exacerbates the thermal cracking problem. Dry machining keeps the tool hot and tougher During the dry-machining process the coating takes the place of the coolant in protecting the cutting edges from wear and ensures reliable chip evacuation. Additional studies are needed on the dry-drilling and taping process for long chipping materials. UR - https://www.sv-jme.eu/article/process-and-apparatus-developments-in-dry-machining-applications/
@article{{}{.},
author = {Kulekci, M.},
title = {Process and apparatus developments in dry-machining applications},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {53},
number = {9},
year = {2007},
doi = {},
url = {https://www.sv-jme.eu/article/process-and-apparatus-developments-in-dry-machining-applications/}
}
TY - JOUR AU - Kulekci, Mustafa Kemal PY - 2017/08/18 TI - Process and apparatus developments in dry-machining applications JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 53, No 9 (2007): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - dry machining, coatings, cutting inserts, tool life, N2 - In this study a recent development in the dry-machining process is discussed. Dry machining eliminates the Problems of cutting-fluid contamination, disposal, filtrations and the risk of health problems. The suitability of the workpiece for dry machining depends on the material's properties. The performance of the cutting tool for the dry-machining process depends on the properties of the coating. The process also has a restriction that must be taken into consideration: the rapid, repetitive fluctuations of the temperature lead to expansion, contraction and an increased risk of thermal cracking of the cutting edge. The presence of the coolant exacerbates the thermal cracking problem. Dry machining keeps the tool hot and tougher During the dry-machining process the coating takes the place of the coolant in protecting the cutting edges from wear and ensures reliable chip evacuation. Additional studies are needed on the dry-drilling and taping process for long chipping materials. UR - https://www.sv-jme.eu/article/process-and-apparatus-developments-in-dry-machining-applications/
Kulekci, Mustafa"Process and apparatus developments in dry-machining applications" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 53 Number 9 (18 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 53(2007)9, 541-547
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In this study a recent development in the dry-machining process is discussed. Dry machining eliminates the Problems of cutting-fluid contamination, disposal, filtrations and the risk of health problems. The suitability of the workpiece for dry machining depends on the material's properties. The performance of the cutting tool for the dry-machining process depends on the properties of the coating. The process also has a restriction that must be taken into consideration: the rapid, repetitive fluctuations of the temperature lead to expansion, contraction and an increased risk of thermal cracking of the cutting edge. The presence of the coolant exacerbates the thermal cracking problem. Dry machining keeps the tool hot and tougher During the dry-machining process the coating takes the place of the coolant in protecting the cutting edges from wear and ensures reliable chip evacuation. Additional studies are needed on the dry-drilling and taping process for long chipping materials.