MORA ESPINOSA, William Javier;RAMÓN VALENCIA, Bladimir Azdrubal;MORENO CONTRERAS, Gonzalo G.. Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 65, n.3, p. 181-188, march 2019. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/physico-mechanical-characterization-of-moriche-natural-fiber-mauritia-flexuosa-and-composite-with-bioepoxy-resin/>. Date accessed: 31 aug. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2018.5730.
Mora Espinosa, W., Ramón Valencia, B., & Moreno Contreras, G. (2019). Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin. Strojniški vestnik - Journal of Mechanical Engineering, 65(3), 181-188. doi:http://dx.doi.org/10.5545/sv-jme.2018.5730
@article{sv-jmesv-jme.2018.5730, author = {William Javier Mora Espinosa and Bladimir Azdrubal Ramón Valencia and Gonzalo G. Moreno Contreras}, title = {Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {65}, number = {3}, year = {2019}, keywords = {natural fibers, biocomposite, reinforcement, characterization}, abstract = {The characterization of natural fibres is currently used in the field of science and engineering of materials with the purpose of developing new bio-composites friendly to the environment. The goal of this research is to manufacture and characterize a bio-composite reinforced with Moriche palm fibre (Mauritia flexuosa) and to determine the thermal, mechanical and morphological properties of the fibre. Subsequently, the tensile and flexion properties of the composite was evaluated, as well as its morphology. The thermogravimetric analysis demonstrated that the fibre has hydrophilic characteristics and good stability at temperatures close to 200 °C. In the tensile test under static axial forces, its modulus of elasticity, stress and maximum deformation was determined. Its morphology, composed of the small lumen and wide cell wall with size variations, was examined with scanning electron microscopy (SEM). In the same way, the maximum tensile stress of the composite leads to the conclusion that it is viable to use this material for applications in non-structural elements, which are below 25 MPa. The results of maximum flexural strength (253.7 MPa) allow more extensive applications in doubly supported or overhanging parts subjected to concentrated or distributed loads. The microstructure obtained with SEM showed a poor adhesion between the matrix and the reinforcement.}, issn = {0039-2480}, pages = {181-188}, doi = {10.5545/sv-jme.2018.5730}, url = {https://www.sv-jme.eu/article/physico-mechanical-characterization-of-moriche-natural-fiber-mauritia-flexuosa-and-composite-with-bioepoxy-resin/} }
Mora Espinosa, W.,Ramón Valencia, B.,Moreno Contreras, G. 2019 March 65. Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 65:3
%A Mora Espinosa, William Javier %A Ramón Valencia, Bladimir Azdrubal %A Moreno Contreras, Gonzalo G. %D 2019 %T Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin %B 2019 %9 natural fibers, biocomposite, reinforcement, characterization %! Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin %K natural fibers, biocomposite, reinforcement, characterization %X The characterization of natural fibres is currently used in the field of science and engineering of materials with the purpose of developing new bio-composites friendly to the environment. The goal of this research is to manufacture and characterize a bio-composite reinforced with Moriche palm fibre (Mauritia flexuosa) and to determine the thermal, mechanical and morphological properties of the fibre. Subsequently, the tensile and flexion properties of the composite was evaluated, as well as its morphology. The thermogravimetric analysis demonstrated that the fibre has hydrophilic characteristics and good stability at temperatures close to 200 °C. In the tensile test under static axial forces, its modulus of elasticity, stress and maximum deformation was determined. Its morphology, composed of the small lumen and wide cell wall with size variations, was examined with scanning electron microscopy (SEM). In the same way, the maximum tensile stress of the composite leads to the conclusion that it is viable to use this material for applications in non-structural elements, which are below 25 MPa. The results of maximum flexural strength (253.7 MPa) allow more extensive applications in doubly supported or overhanging parts subjected to concentrated or distributed loads. The microstructure obtained with SEM showed a poor adhesion between the matrix and the reinforcement. %U https://www.sv-jme.eu/article/physico-mechanical-characterization-of-moriche-natural-fiber-mauritia-flexuosa-and-composite-with-bioepoxy-resin/ %0 Journal Article %R 10.5545/sv-jme.2018.5730 %& 181 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 65 %N 3 %@ 0039-2480 %8 2019-03-27 %7 2019-03-27
Mora Espinosa, William, Bladimir Azdrubal Ramón Valencia, & Gonzalo G. Moreno Contreras. "Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin." Strojniški vestnik - Journal of Mechanical Engineering [Online], 65.3 (2019): 181-188. Web. 31 Aug. 2024
TY - JOUR AU - Mora Espinosa, William Javier AU - Ramón Valencia, Bladimir Azdrubal AU - Moreno Contreras, Gonzalo G. PY - 2019 TI - Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2018.5730 KW - natural fibers, biocomposite, reinforcement, characterization N2 - The characterization of natural fibres is currently used in the field of science and engineering of materials with the purpose of developing new bio-composites friendly to the environment. The goal of this research is to manufacture and characterize a bio-composite reinforced with Moriche palm fibre (Mauritia flexuosa) and to determine the thermal, mechanical and morphological properties of the fibre. Subsequently, the tensile and flexion properties of the composite was evaluated, as well as its morphology. The thermogravimetric analysis demonstrated that the fibre has hydrophilic characteristics and good stability at temperatures close to 200 °C. In the tensile test under static axial forces, its modulus of elasticity, stress and maximum deformation was determined. Its morphology, composed of the small lumen and wide cell wall with size variations, was examined with scanning electron microscopy (SEM). In the same way, the maximum tensile stress of the composite leads to the conclusion that it is viable to use this material for applications in non-structural elements, which are below 25 MPa. The results of maximum flexural strength (253.7 MPa) allow more extensive applications in doubly supported or overhanging parts subjected to concentrated or distributed loads. The microstructure obtained with SEM showed a poor adhesion between the matrix and the reinforcement. UR - https://www.sv-jme.eu/article/physico-mechanical-characterization-of-moriche-natural-fiber-mauritia-flexuosa-and-composite-with-bioepoxy-resin/
@article{{sv-jme}{sv-jme.2018.5730}, author = {Mora Espinosa, W., Ramón Valencia, B., Moreno Contreras, G.}, title = {Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {65}, number = {3}, year = {2019}, doi = {10.5545/sv-jme.2018.5730}, url = {https://www.sv-jme.eu/article/physico-mechanical-characterization-of-moriche-natural-fiber-mauritia-flexuosa-and-composite-with-bioepoxy-resin/} }
TY - JOUR AU - Mora Espinosa, William Javier AU - Ramón Valencia, Bladimir Azdrubal AU - Moreno Contreras, Gonzalo G. PY - 2019/03/27 TI - Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 65, No 3 (2019): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2018.5730 KW - natural fibers, biocomposite, reinforcement, characterization N2 - The characterization of natural fibres is currently used in the field of science and engineering of materials with the purpose of developing new bio-composites friendly to the environment. The goal of this research is to manufacture and characterize a bio-composite reinforced with Moriche palm fibre (Mauritia flexuosa) and to determine the thermal, mechanical and morphological properties of the fibre. Subsequently, the tensile and flexion properties of the composite was evaluated, as well as its morphology. The thermogravimetric analysis demonstrated that the fibre has hydrophilic characteristics and good stability at temperatures close to 200 °C. In the tensile test under static axial forces, its modulus of elasticity, stress and maximum deformation was determined. Its morphology, composed of the small lumen and wide cell wall with size variations, was examined with scanning electron microscopy (SEM). In the same way, the maximum tensile stress of the composite leads to the conclusion that it is viable to use this material for applications in non-structural elements, which are below 25 MPa. The results of maximum flexural strength (253.7 MPa) allow more extensive applications in doubly supported or overhanging parts subjected to concentrated or distributed loads. The microstructure obtained with SEM showed a poor adhesion between the matrix and the reinforcement. UR - https://www.sv-jme.eu/article/physico-mechanical-characterization-of-moriche-natural-fiber-mauritia-flexuosa-and-composite-with-bioepoxy-resin/
Mora Espinosa, William, Ramón Valencia, Bladimir, AND Moreno Contreras, Gonzalo. "Physical-Mechanical Characterization of Moriche Natural Fibre (Mauritia flexuosa) and Composite with Bio-epoxy Resin" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 65 Number 3 (27 March 2019)
Strojniški vestnik - Journal of Mechanical Engineering 65(2019)3, 181-188
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The characterization of natural fibres is currently used in the field of science and engineering of materials with the purpose of developing new bio-composites friendly to the environment. The goal of this research is to manufacture and characterize a bio-composite reinforced with Moriche palm fibre (Mauritia flexuosa) and to determine the thermal, mechanical and morphological properties of the fibre. Subsequently, the tensile and flexion properties of the composite was evaluated, as well as its morphology. The thermogravimetric analysis demonstrated that the fibre has hydrophilic characteristics and good stability at temperatures close to 200 °C. In the tensile test under static axial forces, its modulus of elasticity, stress and maximum deformation was determined. Its morphology, composed of the small lumen and wide cell wall with size variations, was examined with scanning electron microscopy (SEM). In the same way, the maximum tensile stress of the composite leads to the conclusion that it is viable to use this material for applications in non-structural elements, which are below 25 MPa. The results of maximum flexural strength (253.7 MPa) allow more extensive applications in doubly supported or overhanging parts subjected to concentrated or distributed loads. The microstructure obtained with SEM showed a poor adhesion between the matrix and the reinforcement.