UREVC, Janez ;KOC, Pino ;ŠTOK, Boris . Numerical Simulation of Stress Relieving of an Austenite Stainless Steel. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 55, n.10, p. 590-598, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Urevc, J., Koc, P., & Štok, B. (2009). Numerical Simulation of Stress Relieving of an Austenite Stainless Steel. Strojniški vestnik - Journal of Mechanical Engineering, 55(10), 590-598. doi:http://dx.doi.org/
@article{.,
author = {Janez Urevc and Pino Koc and Boris Štok},
title = {Numerical Simulation of Stress Relieving of an Austenite Stainless Steel},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {55},
number = {10},
year = {2009},
keywords = {mechanical properties; modelling and process simulation; stress relieving; viscouselastic-plastic constitutive model; stainless steel; },
abstract = {An approach to numerical simulation of the annealing process with stress relieving is presented in the paper. For austenite stainless steel 316L (AISI), which exhibits no phase transformation from the melting point to room temperature, a viscous-elastic-plastic constitutive model is elaborated. First, from given experimental data the respective mechanical material parameters as a function of temperature are numerically identified by an inverse procedure. Then, the adequacy of the adopted model and identified material parameters is proven by a numerical simulation of stress relieving in two technological cases: (i) two-stage deep drawing with intermediate stress annealing and, (ii) simplified welding process followed by post weld heat treatment. In both cases the obtained residual stress state reduction is found to be in good agreement with the empirical experience and data provided from literature.},
issn = {0039-2480}, pages = {590-598}, doi = {},
url = {https://www.sv-jme.eu/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/}
}
Urevc, J.,Koc, P.,Štok, B. 2009 August 55. Numerical Simulation of Stress Relieving of an Austenite Stainless Steel. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 55:10
%A Urevc, Janez %A Koc, Pino %A Štok, Boris %D 2009 %T Numerical Simulation of Stress Relieving of an Austenite Stainless Steel %B 2009 %9 mechanical properties; modelling and process simulation; stress relieving; viscouselastic-plastic constitutive model; stainless steel; %! Numerical Simulation of Stress Relieving of an Austenite Stainless Steel %K mechanical properties; modelling and process simulation; stress relieving; viscouselastic-plastic constitutive model; stainless steel; %X An approach to numerical simulation of the annealing process with stress relieving is presented in the paper. For austenite stainless steel 316L (AISI), which exhibits no phase transformation from the melting point to room temperature, a viscous-elastic-plastic constitutive model is elaborated. First, from given experimental data the respective mechanical material parameters as a function of temperature are numerically identified by an inverse procedure. Then, the adequacy of the adopted model and identified material parameters is proven by a numerical simulation of stress relieving in two technological cases: (i) two-stage deep drawing with intermediate stress annealing and, (ii) simplified welding process followed by post weld heat treatment. In both cases the obtained residual stress state reduction is found to be in good agreement with the empirical experience and data provided from literature. %U https://www.sv-jme.eu/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/ %0 Journal Article %R %& 590 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 55 %N 10 %@ 0039-2480 %8 2017-08-21 %7 2017-08-21
Urevc, Janez, Pino Koc, & Boris Štok. "Numerical Simulation of Stress Relieving of an Austenite Stainless Steel." Strojniški vestnik - Journal of Mechanical Engineering [Online], 55.10 (2009): 590-598. Web. 19 Nov. 2024
TY - JOUR AU - Urevc, Janez AU - Koc, Pino AU - Štok, Boris PY - 2009 TI - Numerical Simulation of Stress Relieving of an Austenite Stainless Steel JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - mechanical properties; modelling and process simulation; stress relieving; viscouselastic-plastic constitutive model; stainless steel; N2 - An approach to numerical simulation of the annealing process with stress relieving is presented in the paper. For austenite stainless steel 316L (AISI), which exhibits no phase transformation from the melting point to room temperature, a viscous-elastic-plastic constitutive model is elaborated. First, from given experimental data the respective mechanical material parameters as a function of temperature are numerically identified by an inverse procedure. Then, the adequacy of the adopted model and identified material parameters is proven by a numerical simulation of stress relieving in two technological cases: (i) two-stage deep drawing with intermediate stress annealing and, (ii) simplified welding process followed by post weld heat treatment. In both cases the obtained residual stress state reduction is found to be in good agreement with the empirical experience and data provided from literature. UR - https://www.sv-jme.eu/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/
@article{{}{.},
author = {Urevc, J., Koc, P., Štok, B.},
title = {Numerical Simulation of Stress Relieving of an Austenite Stainless Steel},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {55},
number = {10},
year = {2009},
doi = {},
url = {https://www.sv-jme.eu/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/}
}
TY - JOUR AU - Urevc, Janez AU - Koc, Pino AU - Štok, Boris PY - 2017/08/21 TI - Numerical Simulation of Stress Relieving of an Austenite Stainless Steel JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 55, No 10 (2009): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - mechanical properties, modelling and process simulation, stress relieving, viscouselastic-plastic constitutive model, stainless steel, N2 - An approach to numerical simulation of the annealing process with stress relieving is presented in the paper. For austenite stainless steel 316L (AISI), which exhibits no phase transformation from the melting point to room temperature, a viscous-elastic-plastic constitutive model is elaborated. First, from given experimental data the respective mechanical material parameters as a function of temperature are numerically identified by an inverse procedure. Then, the adequacy of the adopted model and identified material parameters is proven by a numerical simulation of stress relieving in two technological cases: (i) two-stage deep drawing with intermediate stress annealing and, (ii) simplified welding process followed by post weld heat treatment. In both cases the obtained residual stress state reduction is found to be in good agreement with the empirical experience and data provided from literature. UR - https://www.sv-jme.eu/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/
Urevc, Janez, Koc, Pino, AND Štok, Boris. "Numerical Simulation of Stress Relieving of an Austenite Stainless Steel" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 55 Number 10 (21 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 55(2009)10, 590-598
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
An approach to numerical simulation of the annealing process with stress relieving is presented in the paper. For austenite stainless steel 316L (AISI), which exhibits no phase transformation from the melting point to room temperature, a viscous-elastic-plastic constitutive model is elaborated. First, from given experimental data the respective mechanical material parameters as a function of temperature are numerically identified by an inverse procedure. Then, the adequacy of the adopted model and identified material parameters is proven by a numerical simulation of stress relieving in two technological cases: (i) two-stage deep drawing with intermediate stress annealing and, (ii) simplified welding process followed by post weld heat treatment. In both cases the obtained residual stress state reduction is found to be in good agreement with the empirical experience and data provided from literature.