HWANG, So Young ;KIM, Naksoo ;LEE, Cheol-soo . Numerical Investigation on the Effect of Process Parameters during Aluminum Wheel Flow-Forming. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 61, n.7-8, p. 471-476, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/numerical-investigation-on-the-effect-of-process-parameters-during-aluminum-wheel-flow-forming/>. Date accessed: 29 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2014.2180.
Hwang, S., Kim, N., & Lee, C. (2015). Numerical Investigation on the Effect of Process Parameters during Aluminum Wheel Flow-Forming. Strojniški vestnik - Journal of Mechanical Engineering, 61(7-8), 471-476. doi:http://dx.doi.org/10.5545/sv-jme.2014.2180
@article{sv-jmesv-jme.2014.2180, author = {So Young Hwang and Naksoo Kim and Cheol-soo Lee}, title = {Numerical Investigation on the Effect of Process Parameters during Aluminum Wheel Flow-Forming}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {61}, number = {7-8}, year = {2015}, keywords = {Aluminum wheel flow-forming, backflow defect, geometry precision, compression amount}, abstract = {Aluminum wheel flow forming is an incremental forming technique that lengthen the material in axial direction and thin in radial direction. There are many advantages of wheel flow forming such as reducing the weight of the product which leads to improving the fuel economy. However it is difficult to manufacture with high precision in terms of geometry accuracy. In this research, process conditions such as headstock load, feed rate and radial compression amount as well as the geometry of the rolls are investigated in order to improve the precision of the product. In order to do these, simulation is done by FEM software, SHAPE-RR. Result of FE analysis is verified by comparing the bulging amount of the wheel. The material property of aluminum is determined through hot compression test. As a result, geometry accuracy improved with increasing the feed rate of the rolls. Also, having less compression amount in radial direction for the third roll increases the geometry precision.}, issn = {0039-2480}, pages = {471-476}, doi = {10.5545/sv-jme.2014.2180}, url = {https://www.sv-jme.eu/article/numerical-investigation-on-the-effect-of-process-parameters-during-aluminum-wheel-flow-forming/} }
Hwang, S.,Kim, N.,Lee, C. 2015 June 61. Numerical Investigation on the Effect of Process Parameters during Aluminum Wheel Flow-Forming. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 61:7-8
%A Hwang, So Young %A Kim, Naksoo %A Lee, Cheol-soo %D 2015 %T Numerical Investigation on the Effect of Process Parameters during Aluminum Wheel Flow-Forming %B 2015 %9 Aluminum wheel flow-forming, backflow defect, geometry precision, compression amount %! Numerical Investigation on the Effect of Process Parameters during Aluminum Wheel Flow-Forming %K Aluminum wheel flow-forming, backflow defect, geometry precision, compression amount %X Aluminum wheel flow forming is an incremental forming technique that lengthen the material in axial direction and thin in radial direction. There are many advantages of wheel flow forming such as reducing the weight of the product which leads to improving the fuel economy. However it is difficult to manufacture with high precision in terms of geometry accuracy. In this research, process conditions such as headstock load, feed rate and radial compression amount as well as the geometry of the rolls are investigated in order to improve the precision of the product. In order to do these, simulation is done by FEM software, SHAPE-RR. Result of FE analysis is verified by comparing the bulging amount of the wheel. The material property of aluminum is determined through hot compression test. As a result, geometry accuracy improved with increasing the feed rate of the rolls. Also, having less compression amount in radial direction for the third roll increases the geometry precision. %U https://www.sv-jme.eu/article/numerical-investigation-on-the-effect-of-process-parameters-during-aluminum-wheel-flow-forming/ %0 Journal Article %R 10.5545/sv-jme.2014.2180 %& 471 %P 6 %J Strojniški vestnik - Journal of Mechanical Engineering %V 61 %N 7-8 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Hwang, So Young, Naksoo Kim, & Cheol-soo Lee. "Numerical Investigation on the Effect of Process Parameters during Aluminum Wheel Flow-Forming." Strojniški vestnik - Journal of Mechanical Engineering [Online], 61.7-8 (2015): 471-476. Web. 29 Dec. 2024
TY - JOUR AU - Hwang, So Young AU - Kim, Naksoo AU - Lee, Cheol-soo PY - 2015 TI - Numerical Investigation on the Effect of Process Parameters during Aluminum Wheel Flow-Forming JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2014.2180 KW - Aluminum wheel flow-forming, backflow defect, geometry precision, compression amount N2 - Aluminum wheel flow forming is an incremental forming technique that lengthen the material in axial direction and thin in radial direction. There are many advantages of wheel flow forming such as reducing the weight of the product which leads to improving the fuel economy. However it is difficult to manufacture with high precision in terms of geometry accuracy. In this research, process conditions such as headstock load, feed rate and radial compression amount as well as the geometry of the rolls are investigated in order to improve the precision of the product. In order to do these, simulation is done by FEM software, SHAPE-RR. Result of FE analysis is verified by comparing the bulging amount of the wheel. The material property of aluminum is determined through hot compression test. As a result, geometry accuracy improved with increasing the feed rate of the rolls. Also, having less compression amount in radial direction for the third roll increases the geometry precision. UR - https://www.sv-jme.eu/article/numerical-investigation-on-the-effect-of-process-parameters-during-aluminum-wheel-flow-forming/
@article{{sv-jme}{sv-jme.2014.2180}, author = {Hwang, S., Kim, N., Lee, C.}, title = {Numerical Investigation on the Effect of Process Parameters during Aluminum Wheel Flow-Forming}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {61}, number = {7-8}, year = {2015}, doi = {10.5545/sv-jme.2014.2180}, url = {https://www.sv-jme.eu/article/numerical-investigation-on-the-effect-of-process-parameters-during-aluminum-wheel-flow-forming/} }
TY - JOUR AU - Hwang, So Young AU - Kim, Naksoo AU - Lee, Cheol-soo PY - 2018/06/27 TI - Numerical Investigation on the Effect of Process Parameters during Aluminum Wheel Flow-Forming JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 61, No 7-8 (2015): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2014.2180 KW - Aluminum wheel flow-forming, backflow defect, geometry precision, compression amount N2 - Aluminum wheel flow forming is an incremental forming technique that lengthen the material in axial direction and thin in radial direction. There are many advantages of wheel flow forming such as reducing the weight of the product which leads to improving the fuel economy. However it is difficult to manufacture with high precision in terms of geometry accuracy. In this research, process conditions such as headstock load, feed rate and radial compression amount as well as the geometry of the rolls are investigated in order to improve the precision of the product. In order to do these, simulation is done by FEM software, SHAPE-RR. Result of FE analysis is verified by comparing the bulging amount of the wheel. The material property of aluminum is determined through hot compression test. As a result, geometry accuracy improved with increasing the feed rate of the rolls. Also, having less compression amount in radial direction for the third roll increases the geometry precision. UR - https://www.sv-jme.eu/article/numerical-investigation-on-the-effect-of-process-parameters-during-aluminum-wheel-flow-forming/
Hwang, So Young, Kim, Naksoo, AND Lee, Cheol-soo. "Numerical Investigation on the Effect of Process Parameters during Aluminum Wheel Flow-Forming" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 61 Number 7-8 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 61(2015)7-8, 471-476
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Aluminum wheel flow forming is an incremental forming technique that lengthen the material in axial direction and thin in radial direction. There are many advantages of wheel flow forming such as reducing the weight of the product which leads to improving the fuel economy. However it is difficult to manufacture with high precision in terms of geometry accuracy. In this research, process conditions such as headstock load, feed rate and radial compression amount as well as the geometry of the rolls are investigated in order to improve the precision of the product. In order to do these, simulation is done by FEM software, SHAPE-RR. Result of FE analysis is verified by comparing the bulging amount of the wheel. The material property of aluminum is determined through hot compression test. As a result, geometry accuracy improved with increasing the feed rate of the rolls. Also, having less compression amount in radial direction for the third roll increases the geometry precision.