FLOODY, Sergio E.;ARENAS, Jorge P.;DE ESPÍNDOLA, José J.. Modelling Metal-Elastomer Composite Structures Using a Finite-Element-Method Approach. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 53, n.2, p. 66-77, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/modelling-metal-elastomer-composite-structures-using-a-finite-element-method-approach/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Floody, S., Arenas, J., & de Espíndola, J. (2007). Modelling Metal-Elastomer Composite Structures Using a Finite-Element-Method Approach. Strojniški vestnik - Journal of Mechanical Engineering, 53(2), 66-77. doi:http://dx.doi.org/
@article{.,
author = {Sergio E. Floody and Jorge P. Arenas and José J. de Espíndola},
title = {Modelling Metal-Elastomer Composite Structures Using a Finite-Element-Method Approach},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {53},
number = {2},
year = {2007},
keywords = {metal elastomer composite; structure modelling; finite element methods; Stockbridge dumpers; },
abstract = {Metal-elastomer composite structures are an important tool for the reduction of mechanical vibrations. A structure that vibrates in flexure can be damped by the appropriate addition of a layer of damping material, for example, an elastomer, where the layer undergoes cyclic strain and thereby dissipates energy. However, the presence of the elastomer means that the structure is frequency dependent, which is a difficult case for obtaining accurate predictions since the solution of the corresponding eigenvalue problem is hard to compute. In this paper a methodology for modelling metal-elastomer composite structures using a finiteelement approach is presented. In addition, a calculation scheme to approximate the solution of the frequency-dependent eigenvalue problem is discussed. The numerical results for the inertness were compared with the experimental results for a classic composite sandwich beam. The method is extended to model and optimise Stockbridge absorbers used to suppress the aeolian vibrations of an actual electrical transmission line. Instead of tuning the absorber to some particular frequency, an objective function is defined and the physical dimensions of the absorber are optimised by means of a genetic algorithm. In this approach, the complete problem is analysed without using the modal strain-energy approach, implying that this modelling satisfies the causality principle. The method appears to be useful as a tool for designing and modelling metal-elastomer composite structures.},
issn = {0039-2480}, pages = {66-77}, doi = {},
url = {https://www.sv-jme.eu/article/modelling-metal-elastomer-composite-structures-using-a-finite-element-method-approach/}
}
Floody, S.,Arenas, J.,de Espíndola, J. 2007 August 53. Modelling Metal-Elastomer Composite Structures Using a Finite-Element-Method Approach. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 53:2
%A Floody, Sergio E. %A Arenas, Jorge P. %A de Espíndola, José J. %D 2007 %T Modelling Metal-Elastomer Composite Structures Using a Finite-Element-Method Approach %B 2007 %9 metal elastomer composite; structure modelling; finite element methods; Stockbridge dumpers; %! Modelling Metal-Elastomer Composite Structures Using a Finite-Element-Method Approach %K metal elastomer composite; structure modelling; finite element methods; Stockbridge dumpers; %X Metal-elastomer composite structures are an important tool for the reduction of mechanical vibrations. A structure that vibrates in flexure can be damped by the appropriate addition of a layer of damping material, for example, an elastomer, where the layer undergoes cyclic strain and thereby dissipates energy. However, the presence of the elastomer means that the structure is frequency dependent, which is a difficult case for obtaining accurate predictions since the solution of the corresponding eigenvalue problem is hard to compute. In this paper a methodology for modelling metal-elastomer composite structures using a finiteelement approach is presented. In addition, a calculation scheme to approximate the solution of the frequency-dependent eigenvalue problem is discussed. The numerical results for the inertness were compared with the experimental results for a classic composite sandwich beam. The method is extended to model and optimise Stockbridge absorbers used to suppress the aeolian vibrations of an actual electrical transmission line. Instead of tuning the absorber to some particular frequency, an objective function is defined and the physical dimensions of the absorber are optimised by means of a genetic algorithm. In this approach, the complete problem is analysed without using the modal strain-energy approach, implying that this modelling satisfies the causality principle. The method appears to be useful as a tool for designing and modelling metal-elastomer composite structures. %U https://www.sv-jme.eu/article/modelling-metal-elastomer-composite-structures-using-a-finite-element-method-approach/ %0 Journal Article %R %& 66 %P 12 %J Strojniški vestnik - Journal of Mechanical Engineering %V 53 %N 2 %@ 0039-2480 %8 2017-08-18 %7 2017-08-18
Floody, Sergio, Jorge P. Arenas, & José J. de Espíndola. "Modelling Metal-Elastomer Composite Structures Using a Finite-Element-Method Approach." Strojniški vestnik - Journal of Mechanical Engineering [Online], 53.2 (2007): 66-77. Web. 19 Nov. 2024
TY - JOUR AU - Floody, Sergio E. AU - Arenas, Jorge P. AU - de Espíndola, José J. PY - 2007 TI - Modelling Metal-Elastomer Composite Structures Using a Finite-Element-Method Approach JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - metal elastomer composite; structure modelling; finite element methods; Stockbridge dumpers; N2 - Metal-elastomer composite structures are an important tool for the reduction of mechanical vibrations. A structure that vibrates in flexure can be damped by the appropriate addition of a layer of damping material, for example, an elastomer, where the layer undergoes cyclic strain and thereby dissipates energy. However, the presence of the elastomer means that the structure is frequency dependent, which is a difficult case for obtaining accurate predictions since the solution of the corresponding eigenvalue problem is hard to compute. In this paper a methodology for modelling metal-elastomer composite structures using a finiteelement approach is presented. In addition, a calculation scheme to approximate the solution of the frequency-dependent eigenvalue problem is discussed. The numerical results for the inertness were compared with the experimental results for a classic composite sandwich beam. The method is extended to model and optimise Stockbridge absorbers used to suppress the aeolian vibrations of an actual electrical transmission line. Instead of tuning the absorber to some particular frequency, an objective function is defined and the physical dimensions of the absorber are optimised by means of a genetic algorithm. In this approach, the complete problem is analysed without using the modal strain-energy approach, implying that this modelling satisfies the causality principle. The method appears to be useful as a tool for designing and modelling metal-elastomer composite structures. UR - https://www.sv-jme.eu/article/modelling-metal-elastomer-composite-structures-using-a-finite-element-method-approach/
@article{{}{.},
author = {Floody, S., Arenas, J., de Espíndola, J.},
title = {Modelling Metal-Elastomer Composite Structures Using a Finite-Element-Method Approach},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {53},
number = {2},
year = {2007},
doi = {},
url = {https://www.sv-jme.eu/article/modelling-metal-elastomer-composite-structures-using-a-finite-element-method-approach/}
}
TY - JOUR AU - Floody, Sergio E. AU - Arenas, Jorge P. AU - de Espíndola, José J. PY - 2017/08/18 TI - Modelling Metal-Elastomer Composite Structures Using a Finite-Element-Method Approach JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 53, No 2 (2007): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - metal elastomer composite, structure modelling, finite element methods, Stockbridge dumpers, N2 - Metal-elastomer composite structures are an important tool for the reduction of mechanical vibrations. A structure that vibrates in flexure can be damped by the appropriate addition of a layer of damping material, for example, an elastomer, where the layer undergoes cyclic strain and thereby dissipates energy. However, the presence of the elastomer means that the structure is frequency dependent, which is a difficult case for obtaining accurate predictions since the solution of the corresponding eigenvalue problem is hard to compute. In this paper a methodology for modelling metal-elastomer composite structures using a finiteelement approach is presented. In addition, a calculation scheme to approximate the solution of the frequency-dependent eigenvalue problem is discussed. The numerical results for the inertness were compared with the experimental results for a classic composite sandwich beam. The method is extended to model and optimise Stockbridge absorbers used to suppress the aeolian vibrations of an actual electrical transmission line. Instead of tuning the absorber to some particular frequency, an objective function is defined and the physical dimensions of the absorber are optimised by means of a genetic algorithm. In this approach, the complete problem is analysed without using the modal strain-energy approach, implying that this modelling satisfies the causality principle. The method appears to be useful as a tool for designing and modelling metal-elastomer composite structures. UR - https://www.sv-jme.eu/article/modelling-metal-elastomer-composite-structures-using-a-finite-element-method-approach/
Floody, Sergio, Arenas, Jorge, AND de Espíndola, José. "Modelling Metal-Elastomer Composite Structures Using a Finite-Element-Method Approach" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 53 Number 2 (18 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 53(2007)2, 66-77
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Metal-elastomer composite structures are an important tool for the reduction of mechanical vibrations. A structure that vibrates in flexure can be damped by the appropriate addition of a layer of damping material, for example, an elastomer, where the layer undergoes cyclic strain and thereby dissipates energy. However, the presence of the elastomer means that the structure is frequency dependent, which is a difficult case for obtaining accurate predictions since the solution of the corresponding eigenvalue problem is hard to compute. In this paper a methodology for modelling metal-elastomer composite structures using a finiteelement approach is presented. In addition, a calculation scheme to approximate the solution of the frequency-dependent eigenvalue problem is discussed. The numerical results for the inertness were compared with the experimental results for a classic composite sandwich beam. The method is extended to model and optimise Stockbridge absorbers used to suppress the aeolian vibrations of an actual electrical transmission line. Instead of tuning the absorber to some particular frequency, an objective function is defined and the physical dimensions of the absorber are optimised by means of a genetic algorithm. In this approach, the complete problem is analysed without using the modal strain-energy approach, implying that this modelling satisfies the causality principle. The method appears to be useful as a tool for designing and modelling metal-elastomer composite structures.