GRUM, Janez ;ŠTURM, Roman . Laser Heat Treatment of Gray and Nodular Irons. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 41, n.11-12, p. 371-380, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/laser-heat-treatment-of-gray-and-nodular-irons/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Grum, J., & Šturm, R. (1995). Laser Heat Treatment of Gray and Nodular Irons. Strojniški vestnik - Journal of Mechanical Engineering, 41(11-12), 371-380. doi:http://dx.doi.org/
@article{.,
author = {Janez Grum and Roman Šturm},
title = {Laser Heat Treatment of Gray and Nodular Irons},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {41},
number = {11-12},
year = {1995},
keywords = {laser heat treatment; gray irons; nodular irons; },
abstract = {Laser machining systems have numerous advantages over the conventional methods and are increasingly used in manufacturing. These systems can operate as individual systems or they can form part of a manufacturing cell for machining and heat treatment. Recently, special attention has been devoted to laser heat treatment of cast iron mostly because of the good combination between the ductile core and the newly formed hard, fine structured surface which significantly increases corrosion and wear resistance of the material. The investigation studies the behaviour of gray iron and ductile iron after laser heat treatment from the point of view of structure, and verifies it by measuring the changes in hardness of the hardened trace. The findings about laser heat treatment of these casts are supplemented by careful selection of optimum laser treatment conditions.},
issn = {0039-2480}, pages = {371-380}, doi = {},
url = {https://www.sv-jme.eu/article/laser-heat-treatment-of-gray-and-nodular-irons/}
}
Grum, J.,Šturm, R. 1995 July 41. Laser Heat Treatment of Gray and Nodular Irons. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 41:11-12
%A Grum, Janez %A Šturm, Roman %D 1995 %T Laser Heat Treatment of Gray and Nodular Irons %B 1995 %9 laser heat treatment; gray irons; nodular irons; %! Laser Heat Treatment of Gray and Nodular Irons %K laser heat treatment; gray irons; nodular irons; %X Laser machining systems have numerous advantages over the conventional methods and are increasingly used in manufacturing. These systems can operate as individual systems or they can form part of a manufacturing cell for machining and heat treatment. Recently, special attention has been devoted to laser heat treatment of cast iron mostly because of the good combination between the ductile core and the newly formed hard, fine structured surface which significantly increases corrosion and wear resistance of the material. The investigation studies the behaviour of gray iron and ductile iron after laser heat treatment from the point of view of structure, and verifies it by measuring the changes in hardness of the hardened trace. The findings about laser heat treatment of these casts are supplemented by careful selection of optimum laser treatment conditions. %U https://www.sv-jme.eu/article/laser-heat-treatment-of-gray-and-nodular-irons/ %0 Journal Article %R %& 371 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 41 %N 11-12 %@ 0039-2480 %8 2017-07-06 %7 2017-07-06
Grum, Janez, & Roman Šturm. "Laser Heat Treatment of Gray and Nodular Irons." Strojniški vestnik - Journal of Mechanical Engineering [Online], 41.11-12 (1995): 371-380. Web. 19 Nov. 2024
TY - JOUR AU - Grum, Janez AU - Šturm, Roman PY - 1995 TI - Laser Heat Treatment of Gray and Nodular Irons JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - laser heat treatment; gray irons; nodular irons; N2 - Laser machining systems have numerous advantages over the conventional methods and are increasingly used in manufacturing. These systems can operate as individual systems or they can form part of a manufacturing cell for machining and heat treatment. Recently, special attention has been devoted to laser heat treatment of cast iron mostly because of the good combination between the ductile core and the newly formed hard, fine structured surface which significantly increases corrosion and wear resistance of the material. The investigation studies the behaviour of gray iron and ductile iron after laser heat treatment from the point of view of structure, and verifies it by measuring the changes in hardness of the hardened trace. The findings about laser heat treatment of these casts are supplemented by careful selection of optimum laser treatment conditions. UR - https://www.sv-jme.eu/article/laser-heat-treatment-of-gray-and-nodular-irons/
@article{{}{.},
author = {Grum, J., Šturm, R.},
title = {Laser Heat Treatment of Gray and Nodular Irons},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {41},
number = {11-12},
year = {1995},
doi = {},
url = {https://www.sv-jme.eu/article/laser-heat-treatment-of-gray-and-nodular-irons/}
}
TY - JOUR AU - Grum, Janez AU - Šturm, Roman PY - 2017/07/06 TI - Laser Heat Treatment of Gray and Nodular Irons JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 41, No 11-12 (1995): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - laser heat treatment, gray irons, nodular irons, N2 - Laser machining systems have numerous advantages over the conventional methods and are increasingly used in manufacturing. These systems can operate as individual systems or they can form part of a manufacturing cell for machining and heat treatment. Recently, special attention has been devoted to laser heat treatment of cast iron mostly because of the good combination between the ductile core and the newly formed hard, fine structured surface which significantly increases corrosion and wear resistance of the material. The investigation studies the behaviour of gray iron and ductile iron after laser heat treatment from the point of view of structure, and verifies it by measuring the changes in hardness of the hardened trace. The findings about laser heat treatment of these casts are supplemented by careful selection of optimum laser treatment conditions. UR - https://www.sv-jme.eu/article/laser-heat-treatment-of-gray-and-nodular-irons/
Grum, Janez, AND Šturm, Roman. "Laser Heat Treatment of Gray and Nodular Irons" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 41 Number 11-12 (06 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 41(1995)11-12, 371-380
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Laser machining systems have numerous advantages over the conventional methods and are increasingly used in manufacturing. These systems can operate as individual systems or they can form part of a manufacturing cell for machining and heat treatment. Recently, special attention has been devoted to laser heat treatment of cast iron mostly because of the good combination between the ductile core and the newly formed hard, fine structured surface which significantly increases corrosion and wear resistance of the material. The investigation studies the behaviour of gray iron and ductile iron after laser heat treatment from the point of view of structure, and verifies it by measuring the changes in hardness of the hardened trace. The findings about laser heat treatment of these casts are supplemented by careful selection of optimum laser treatment conditions.