FRITSCHING, Udo ;SCHMIDT, Ralf-R. . Flow Control in Gas Pressure Quenching for Reducing Distortion Potential. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 55, n.3, p. 174-181, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/flow-control-in-gas-pressure-quenching-for-reducing-distortion-potential/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Fritsching, U., & Schmidt, R. (2009). Flow Control in Gas Pressure Quenching for Reducing Distortion Potential. Strojniški vestnik - Journal of Mechanical Engineering, 55(3), 174-181. doi:http://dx.doi.org/
@article{.,
author = {Udo Fritsching and Ralf-R. Schmidt},
title = {Flow Control in Gas Pressure Quenching for Reducing Distortion Potential},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {55},
number = {3},
year = {2009},
keywords = {heat treatment; gas quenching; high pressure quenching; flow optimization; reducing distortion; },
abstract = {High pressure gas quenching is an established heat treatment process that has some obvious advantages compared to the use of liquid quenchants: a low impact on the environment, the possibility of a more direct control of the quenching results and reduced distortion. In this paper, concepts for the optimization of the high pressure gas quenching process of parts that are arranged in a load are presented. With the aid of numerical simulation, using different detailed levels of the process and experimental investigations in a model chamber as well as in industrial gas quenching facilities, guidelines are developed for a more uniform quenching. Here, two aspects of the process are covered: On one hand, the arrangement of the parts in the load and the interaction with the upstream flow profile and the flow distribution is analyzed. On the other hand, the possibilities of how to effectively control the local flow are shown e.g. by mounting nozzle systems inside the load for a locally focused and increased heat transfer from the parts. Using these nozzles, parts can also be quenched asymmetrically for compensation of their distortion potential. A heat transfer measurement technique for verification of the numerical results is introduced briefly.},
issn = {0039-2480}, pages = {174-181}, doi = {},
url = {https://www.sv-jme.eu/article/flow-control-in-gas-pressure-quenching-for-reducing-distortion-potential/}
}
Fritsching, U.,Schmidt, R. 2009 August 55. Flow Control in Gas Pressure Quenching for Reducing Distortion Potential. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 55:3
%A Fritsching, Udo %A Schmidt, Ralf-R. %D 2009 %T Flow Control in Gas Pressure Quenching for Reducing Distortion Potential %B 2009 %9 heat treatment; gas quenching; high pressure quenching; flow optimization; reducing distortion; %! Flow Control in Gas Pressure Quenching for Reducing Distortion Potential %K heat treatment; gas quenching; high pressure quenching; flow optimization; reducing distortion; %X High pressure gas quenching is an established heat treatment process that has some obvious advantages compared to the use of liquid quenchants: a low impact on the environment, the possibility of a more direct control of the quenching results and reduced distortion. In this paper, concepts for the optimization of the high pressure gas quenching process of parts that are arranged in a load are presented. With the aid of numerical simulation, using different detailed levels of the process and experimental investigations in a model chamber as well as in industrial gas quenching facilities, guidelines are developed for a more uniform quenching. Here, two aspects of the process are covered: On one hand, the arrangement of the parts in the load and the interaction with the upstream flow profile and the flow distribution is analyzed. On the other hand, the possibilities of how to effectively control the local flow are shown e.g. by mounting nozzle systems inside the load for a locally focused and increased heat transfer from the parts. Using these nozzles, parts can also be quenched asymmetrically for compensation of their distortion potential. A heat transfer measurement technique for verification of the numerical results is introduced briefly. %U https://www.sv-jme.eu/article/flow-control-in-gas-pressure-quenching-for-reducing-distortion-potential/ %0 Journal Article %R %& 174 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 55 %N 3 %@ 0039-2480 %8 2017-08-21 %7 2017-08-21
Fritsching, Udo, & Ralf-R. Schmidt. "Flow Control in Gas Pressure Quenching for Reducing Distortion Potential." Strojniški vestnik - Journal of Mechanical Engineering [Online], 55.3 (2009): 174-181. Web. 19 Nov. 2024
TY - JOUR AU - Fritsching, Udo AU - Schmidt, Ralf-R. PY - 2009 TI - Flow Control in Gas Pressure Quenching for Reducing Distortion Potential JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - heat treatment; gas quenching; high pressure quenching; flow optimization; reducing distortion; N2 - High pressure gas quenching is an established heat treatment process that has some obvious advantages compared to the use of liquid quenchants: a low impact on the environment, the possibility of a more direct control of the quenching results and reduced distortion. In this paper, concepts for the optimization of the high pressure gas quenching process of parts that are arranged in a load are presented. With the aid of numerical simulation, using different detailed levels of the process and experimental investigations in a model chamber as well as in industrial gas quenching facilities, guidelines are developed for a more uniform quenching. Here, two aspects of the process are covered: On one hand, the arrangement of the parts in the load and the interaction with the upstream flow profile and the flow distribution is analyzed. On the other hand, the possibilities of how to effectively control the local flow are shown e.g. by mounting nozzle systems inside the load for a locally focused and increased heat transfer from the parts. Using these nozzles, parts can also be quenched asymmetrically for compensation of their distortion potential. A heat transfer measurement technique for verification of the numerical results is introduced briefly. UR - https://www.sv-jme.eu/article/flow-control-in-gas-pressure-quenching-for-reducing-distortion-potential/
@article{{}{.},
author = {Fritsching, U., Schmidt, R.},
title = {Flow Control in Gas Pressure Quenching for Reducing Distortion Potential},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {55},
number = {3},
year = {2009},
doi = {},
url = {https://www.sv-jme.eu/article/flow-control-in-gas-pressure-quenching-for-reducing-distortion-potential/}
}
TY - JOUR AU - Fritsching, Udo AU - Schmidt, Ralf-R. PY - 2017/08/21 TI - Flow Control in Gas Pressure Quenching for Reducing Distortion Potential JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 55, No 3 (2009): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - heat treatment, gas quenching, high pressure quenching, flow optimization, reducing distortion, N2 - High pressure gas quenching is an established heat treatment process that has some obvious advantages compared to the use of liquid quenchants: a low impact on the environment, the possibility of a more direct control of the quenching results and reduced distortion. In this paper, concepts for the optimization of the high pressure gas quenching process of parts that are arranged in a load are presented. With the aid of numerical simulation, using different detailed levels of the process and experimental investigations in a model chamber as well as in industrial gas quenching facilities, guidelines are developed for a more uniform quenching. Here, two aspects of the process are covered: On one hand, the arrangement of the parts in the load and the interaction with the upstream flow profile and the flow distribution is analyzed. On the other hand, the possibilities of how to effectively control the local flow are shown e.g. by mounting nozzle systems inside the load for a locally focused and increased heat transfer from the parts. Using these nozzles, parts can also be quenched asymmetrically for compensation of their distortion potential. A heat transfer measurement technique for verification of the numerical results is introduced briefly. UR - https://www.sv-jme.eu/article/flow-control-in-gas-pressure-quenching-for-reducing-distortion-potential/
Fritsching, Udo, AND Schmidt, Ralf-R.. "Flow Control in Gas Pressure Quenching for Reducing Distortion Potential" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 55 Number 3 (21 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 55(2009)3, 174-181
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
High pressure gas quenching is an established heat treatment process that has some obvious advantages compared to the use of liquid quenchants: a low impact on the environment, the possibility of a more direct control of the quenching results and reduced distortion. In this paper, concepts for the optimization of the high pressure gas quenching process of parts that are arranged in a load are presented. With the aid of numerical simulation, using different detailed levels of the process and experimental investigations in a model chamber as well as in industrial gas quenching facilities, guidelines are developed for a more uniform quenching. Here, two aspects of the process are covered: On one hand, the arrangement of the parts in the load and the interaction with the upstream flow profile and the flow distribution is analyzed. On the other hand, the possibilities of how to effectively control the local flow are shown e.g. by mounting nozzle systems inside the load for a locally focused and increased heat transfer from the parts. Using these nozzles, parts can also be quenched asymmetrically for compensation of their distortion potential. A heat transfer measurement technique for verification of the numerical results is introduced briefly.