FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves

NIŢU, Eduard ;IORDACHE, Monica ;MARINCEI, Luminiţa ;CHARPENTIER, Isabelle ;LE COZ, Gaël ;FERRON, Gérard ;UNGUREANU, Ion .
FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.9, p. 667-673, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/fe-modeling-of-cold-rolling-by-in-feed-method-of-circular-grooves/>. Date accessed: 19 nov. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2010.244.

Niţu, E., Iordache, M., Marincei, L., Charpentier, I., Le Coz, G., Ferron, G., & Ungureanu, I.
(2011).
FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves.
Strojniški vestnik - Journal of Mechanical Engineering, 57(9), 667-673.
doi:http://dx.doi.org/10.5545/sv-jme.2010.244

@article{sv-jmesv-jme.2010.244,
	author = {Eduard  Niţu and Monica  Iordache and Luminiţa  Marincei and Isabelle  Charpentier and Gaël  Le Coz and Gérard  Ferron and Ion  Ungureanu},
	title = {FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {57},
	number = {9},
	year = {2011},
	keywords = {groove profile; cold rolling; micro-hardness; finite element modeling},
	abstract = {The methods of cold rolling of rods are widely used in manufacturing industries to obtain pieces with complex profiles. In this study, complex profiles with grooves have been formed by in-feed methods using two rolls. An experimental system was constructed to record the process parameters. The microhardness has been measured by the Vickers method in an axial section of the rolled piece. The process has also been simulated by means of finite element calculations using the Abaqus/Explicit code. The material behavior is described by using a 5-parameter strain-hardening law and by accounting for thermal effects at high strain-rates. Finally, a comparison is made between experimental and simulated results.},
	issn = {0039-2480},	pages = {667-673},	doi = {10.5545/sv-jme.2010.244},
	url = {https://www.sv-jme.eu/article/fe-modeling-of-cold-rolling-by-in-feed-method-of-circular-grooves/}
}

Niţu, E.,Iordache, M.,Marincei, L.,Charpentier, I.,Le Coz, G.,Ferron, G.,Ungureanu, I.
2011 June 57. FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:9

%A Niţu, Eduard 
%A Iordache, Monica 
%A Marincei, Luminiţa 
%A Charpentier, Isabelle 
%A Le Coz, Gaël 
%A Ferron, Gérard 
%A Ungureanu, Ion 
%D 2011
%T FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves
%B 2011
%9 groove profile; cold rolling; micro-hardness; finite element modeling
%! FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves
%K groove profile; cold rolling; micro-hardness; finite element modeling
%X The methods of cold rolling of rods are widely used in manufacturing industries to obtain pieces with complex profiles. In this study, complex profiles with grooves have been formed by in-feed methods using two rolls. An experimental system was constructed to record the process parameters. The microhardness has been measured by the Vickers method in an axial section of the rolled piece. The process has also been simulated by means of finite element calculations using the Abaqus/Explicit code. The material behavior is described by using a 5-parameter strain-hardening law and by accounting for thermal effects at high strain-rates. Finally, a comparison is made between experimental and simulated results.
%U https://www.sv-jme.eu/article/fe-modeling-of-cold-rolling-by-in-feed-method-of-circular-grooves/
%0 Journal Article
%R 10.5545/sv-jme.2010.244
%& 667
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 57
%N 9
%@ 0039-2480
%8 2018-06-29
%7 2018-06-29

Niţu, Eduard, Monica  Iordache, Luminiţa  Marincei, Isabelle  Charpentier, Gaël  Le Coz, Gérard  Ferron, & Ion  Ungureanu.
"FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.9 (2011): 667-673. Web.  19 Nov. 2024

TY  - JOUR
AU  - Niţu, Eduard 
AU  - Iordache, Monica 
AU  - Marincei, Luminiţa 
AU  - Charpentier, Isabelle 
AU  - Le Coz, Gaël 
AU  - Ferron, Gérard 
AU  - Ungureanu, Ion 
PY  - 2011
TI  - FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2010.244
KW  - groove profile; cold rolling; micro-hardness; finite element modeling
N2  - The methods of cold rolling of rods are widely used in manufacturing industries to obtain pieces with complex profiles. In this study, complex profiles with grooves have been formed by in-feed methods using two rolls. An experimental system was constructed to record the process parameters. The microhardness has been measured by the Vickers method in an axial section of the rolled piece. The process has also been simulated by means of finite element calculations using the Abaqus/Explicit code. The material behavior is described by using a 5-parameter strain-hardening law and by accounting for thermal effects at high strain-rates. Finally, a comparison is made between experimental and simulated results.
UR  - https://www.sv-jme.eu/article/fe-modeling-of-cold-rolling-by-in-feed-method-of-circular-grooves/

@article{{sv-jme}{sv-jme.2010.244},
	author = {Niţu, E., Iordache, M., Marincei, L., Charpentier, I., Le Coz, G., Ferron, G., Ungureanu, I.},
	title = {FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {57},
	number = {9},
	year = {2011},
	doi = {10.5545/sv-jme.2010.244},
	url = {https://www.sv-jme.eu/article/fe-modeling-of-cold-rolling-by-in-feed-method-of-circular-grooves/}
}

TY  - JOUR
AU  - Niţu, Eduard 
AU  - Iordache, Monica 
AU  - Marincei, Luminiţa 
AU  - Charpentier, Isabelle 
AU  - Le Coz, Gaël 
AU  - Ferron, Gérard 
AU  - Ungureanu, Ion 
PY  - 2018/06/29
TI  - FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 9 (2011): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2010.244
KW  - groove profile, cold rolling, micro-hardness, finite element modeling
N2  - The methods of cold rolling of rods are widely used in manufacturing industries to obtain pieces with complex profiles. In this study, complex profiles with grooves have been formed by in-feed methods using two rolls. An experimental system was constructed to record the process parameters. The microhardness has been measured by the Vickers method in an axial section of the rolled piece. The process has also been simulated by means of finite element calculations using the Abaqus/Explicit code. The material behavior is described by using a 5-parameter strain-hardening law and by accounting for thermal effects at high strain-rates. Finally, a comparison is made between experimental and simulated results.
UR  - https://www.sv-jme.eu/article/fe-modeling-of-cold-rolling-by-in-feed-method-of-circular-grooves/

Niţu, Eduard, Iordache, Monica, Marincei, Luminiţa, Charpentier, Isabelle, Le Coz, Gaël, Ferron, Gérard, AND Ungureanu, Ion.
"FE-Modeling of Cold Rolling by In-Feed Method of Circular Grooves" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 9 (29 June 2018)