ADELI, Mohsen Mahdavi;SOBHNAMAYAN, Fatemeh ;FARAHAT, Said ;ALAVI, Mahmood Abolhasan;SARHADDI, Faramarz . Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 58, n.5, p. 309-318, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/experimental-performance-evaluation-of-a-photovoltaic-thermal-pvt-air-collector-and-its-optimization/>. Date accessed: 19 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2010.007.
Adeli, M., Sobhnamayan, F., Farahat, S., Alavi, M., & Sarhaddi, F. (2012). Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization. Strojniški vestnik - Journal of Mechanical Engineering, 58(5), 309-318. doi:http://dx.doi.org/10.5545/sv-jme.2010.007
@article{sv-jmesv-jme.2010.007,
author = {Mohsen Mahdavi Adeli and Fatemeh Sobhnamayan and Said Farahat and Mahmood Abolhasan Alavi and Faramarz Sarhaddi},
title = {Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {58},
number = {5},
year = {2012},
keywords = {solar photovoltaic thermal (PV/T) air collector; simultaneous optimization},
abstract = {The aim of the present study is the simultaneous optimization of thermal and electrical efficiencies of a solar photovoltaic thermal (PV/T) air collector. The analytical expressions for thermal parameters and thermal efficiency are derived by developing energy balance equation for each component of PV/T air collector. In order to calculate the electrical parameters and electrical efficiency of PV/T air collector the five–parameter current–voltage (I–V) model and a set of translation equations are used. An experimental setup for a typical PV/T air collector is built to measure its thermal and electrical parameters. The experimental validation of the used thermal and electrical models has been carried out by the measured data. It is observed that there is a good agreement between simulated and experimental results. Finally, the simultaneous optimization of the PV/T air collector has been carried out to maximize thermal and electrical efficiencies, simultaneously. Furthermore, the optimized ranges of inlet air velocity, duct depth and the objective functions in optimal Pareto front have been obtained.},
issn = {0039-2480}, pages = {309-318}, doi = {10.5545/sv-jme.2010.007},
url = {https://www.sv-jme.eu/article/experimental-performance-evaluation-of-a-photovoltaic-thermal-pvt-air-collector-and-its-optimization/}
}
Adeli, M.,Sobhnamayan, F.,Farahat, S.,Alavi, M.,Sarhaddi, F. 2012 June 58. Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 58:5
%A Adeli, Mohsen Mahdavi %A Sobhnamayan, Fatemeh %A Farahat, Said %A Alavi, Mahmood Abolhasan %A Sarhaddi, Faramarz %D 2012 %T Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization %B 2012 %9 solar photovoltaic thermal (PV/T) air collector; simultaneous optimization %! Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization %K solar photovoltaic thermal (PV/T) air collector; simultaneous optimization %X The aim of the present study is the simultaneous optimization of thermal and electrical efficiencies of a solar photovoltaic thermal (PV/T) air collector. The analytical expressions for thermal parameters and thermal efficiency are derived by developing energy balance equation for each component of PV/T air collector. In order to calculate the electrical parameters and electrical efficiency of PV/T air collector the five–parameter current–voltage (I–V) model and a set of translation equations are used. An experimental setup for a typical PV/T air collector is built to measure its thermal and electrical parameters. The experimental validation of the used thermal and electrical models has been carried out by the measured data. It is observed that there is a good agreement between simulated and experimental results. Finally, the simultaneous optimization of the PV/T air collector has been carried out to maximize thermal and electrical efficiencies, simultaneously. Furthermore, the optimized ranges of inlet air velocity, duct depth and the objective functions in optimal Pareto front have been obtained. %U https://www.sv-jme.eu/article/experimental-performance-evaluation-of-a-photovoltaic-thermal-pvt-air-collector-and-its-optimization/ %0 Journal Article %R 10.5545/sv-jme.2010.007 %& 309 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 58 %N 5 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Adeli, Mohsen, Fatemeh Sobhnamayan, Said Farahat, Mahmood Abolhasan Alavi, & Faramarz Sarhaddi. "Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization." Strojniški vestnik - Journal of Mechanical Engineering [Online], 58.5 (2012): 309-318. Web. 19 Dec. 2024
TY - JOUR AU - Adeli, Mohsen Mahdavi AU - Sobhnamayan, Fatemeh AU - Farahat, Said AU - Alavi, Mahmood Abolhasan AU - Sarhaddi, Faramarz PY - 2012 TI - Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2010.007 KW - solar photovoltaic thermal (PV/T) air collector; simultaneous optimization N2 - The aim of the present study is the simultaneous optimization of thermal and electrical efficiencies of a solar photovoltaic thermal (PV/T) air collector. The analytical expressions for thermal parameters and thermal efficiency are derived by developing energy balance equation for each component of PV/T air collector. In order to calculate the electrical parameters and electrical efficiency of PV/T air collector the five–parameter current–voltage (I–V) model and a set of translation equations are used. An experimental setup for a typical PV/T air collector is built to measure its thermal and electrical parameters. The experimental validation of the used thermal and electrical models has been carried out by the measured data. It is observed that there is a good agreement between simulated and experimental results. Finally, the simultaneous optimization of the PV/T air collector has been carried out to maximize thermal and electrical efficiencies, simultaneously. Furthermore, the optimized ranges of inlet air velocity, duct depth and the objective functions in optimal Pareto front have been obtained. UR - https://www.sv-jme.eu/article/experimental-performance-evaluation-of-a-photovoltaic-thermal-pvt-air-collector-and-its-optimization/
@article{{sv-jme}{sv-jme.2010.007},
author = {Adeli, M., Sobhnamayan, F., Farahat, S., Alavi, M., Sarhaddi, F.},
title = {Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {58},
number = {5},
year = {2012},
doi = {10.5545/sv-jme.2010.007},
url = {https://www.sv-jme.eu/article/experimental-performance-evaluation-of-a-photovoltaic-thermal-pvt-air-collector-and-its-optimization/}
}
TY - JOUR AU - Adeli, Mohsen Mahdavi AU - Sobhnamayan, Fatemeh AU - Farahat, Said AU - Alavi, Mahmood Abolhasan AU - Sarhaddi, Faramarz PY - 2018/06/28 TI - Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 58, No 5 (2012): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2010.007 KW - solar photovoltaic thermal (PV/T) air collector, simultaneous optimization N2 - The aim of the present study is the simultaneous optimization of thermal and electrical efficiencies of a solar photovoltaic thermal (PV/T) air collector. The analytical expressions for thermal parameters and thermal efficiency are derived by developing energy balance equation for each component of PV/T air collector. In order to calculate the electrical parameters and electrical efficiency of PV/T air collector the five–parameter current–voltage (I–V) model and a set of translation equations are used. An experimental setup for a typical PV/T air collector is built to measure its thermal and electrical parameters. The experimental validation of the used thermal and electrical models has been carried out by the measured data. It is observed that there is a good agreement between simulated and experimental results. Finally, the simultaneous optimization of the PV/T air collector has been carried out to maximize thermal and electrical efficiencies, simultaneously. Furthermore, the optimized ranges of inlet air velocity, duct depth and the objective functions in optimal Pareto front have been obtained. UR - https://www.sv-jme.eu/article/experimental-performance-evaluation-of-a-photovoltaic-thermal-pvt-air-collector-and-its-optimization/
Adeli, Mohsen, Sobhnamayan, Fatemeh, Farahat, Said, Alavi, Mahmood, AND Sarhaddi, Faramarz. "Experimental Performance Evaluation of a Photovoltaic Thermal (PV/T) Air Collector and Its Optimization" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 58 Number 5 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 58(2012)5, 309-318
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The aim of the present study is the simultaneous optimization of thermal and electrical efficiencies of a solar photovoltaic thermal (PV/T) air collector. The analytical expressions for thermal parameters and thermal efficiency are derived by developing energy balance equation for each component of PV/T air collector. In order to calculate the electrical parameters and electrical efficiency of PV/T air collector the five–parameter current–voltage (I–V) model and a set of translation equations are used. An experimental setup for a typical PV/T air collector is built to measure its thermal and electrical parameters. The experimental validation of the used thermal and electrical models has been carried out by the measured data. It is observed that there is a good agreement between simulated and experimental results. Finally, the simultaneous optimization of the PV/T air collector has been carried out to maximize thermal and electrical efficiencies, simultaneously. Furthermore, the optimized ranges of inlet air velocity, duct depth and the objective functions in optimal Pareto front have been obtained.