BARLAS, Zafer ;ÇOLAK, Murat . Evaluation of the Influence of Upset Stage on Joint Properties of Friction Welded Dissimilar Aluminum-Copper Cast Alloys. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 60, n.12, p. 832-837, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/evaluation-of-the-influence-of-upset-stage-on-joint-properties-of-friction-welded-dissimilar-aluminum-copper-cast-alloys/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2014.1857.
Barlas, Z., & Çolak, M. (2014). Evaluation of the Influence of Upset Stage on Joint Properties of Friction Welded Dissimilar Aluminum-Copper Cast Alloys. Strojniški vestnik - Journal of Mechanical Engineering, 60(12), 832-837. doi:http://dx.doi.org/10.5545/sv-jme.2014.1857
@article{sv-jmesv-jme.2014.1857,
author = {Zafer Barlas and Murat Çolak},
title = {Evaluation of the Influence of Upset Stage on Joint Properties of Friction Welded Dissimilar Aluminum-Copper Cast Alloys},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {60},
number = {12},
year = {2014},
keywords = {friction welding; Al-Cu cast alloy; upset stage; tensile strength; microstructure; weld temperature},
abstract = {Friction welding was applied to dissimilar aluminum cast bars alloyed with 2 and 8% copper and the effects of upset time on joint properties were evaluated in this study. The welding process was carried out by a vertical milling machine. Tensile test results show that the ultimate tensile strength increased with an increase in upset time and it reached 88% for Al-2%Cu and 74% for Al-8%Cu base metals. The heat affected zone, thermo-mechanical affected zone, and weld metal were detected in this joint by optical examination, in addition to the base metals. A peak temperature of 436 °C was measured in the weld zone. Hardness values also varied according to microstructural changes. The highest hardness values were detected in the weld metal and its average hardness was 217 Brinell.},
issn = {0039-2480}, pages = {832-837}, doi = {10.5545/sv-jme.2014.1857},
url = {https://www.sv-jme.eu/article/evaluation-of-the-influence-of-upset-stage-on-joint-properties-of-friction-welded-dissimilar-aluminum-copper-cast-alloys/}
}
Barlas, Z.,Çolak, M. 2014 June 60. Evaluation of the Influence of Upset Stage on Joint Properties of Friction Welded Dissimilar Aluminum-Copper Cast Alloys. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 60:12
%A Barlas, Zafer %A Çolak, Murat %D 2014 %T Evaluation of the Influence of Upset Stage on Joint Properties of Friction Welded Dissimilar Aluminum-Copper Cast Alloys %B 2014 %9 friction welding; Al-Cu cast alloy; upset stage; tensile strength; microstructure; weld temperature %! Evaluation of the Influence of Upset Stage on Joint Properties of Friction Welded Dissimilar Aluminum-Copper Cast Alloys %K friction welding; Al-Cu cast alloy; upset stage; tensile strength; microstructure; weld temperature %X Friction welding was applied to dissimilar aluminum cast bars alloyed with 2 and 8% copper and the effects of upset time on joint properties were evaluated in this study. The welding process was carried out by a vertical milling machine. Tensile test results show that the ultimate tensile strength increased with an increase in upset time and it reached 88% for Al-2%Cu and 74% for Al-8%Cu base metals. The heat affected zone, thermo-mechanical affected zone, and weld metal were detected in this joint by optical examination, in addition to the base metals. A peak temperature of 436 °C was measured in the weld zone. Hardness values also varied according to microstructural changes. The highest hardness values were detected in the weld metal and its average hardness was 217 Brinell. %U https://www.sv-jme.eu/article/evaluation-of-the-influence-of-upset-stage-on-joint-properties-of-friction-welded-dissimilar-aluminum-copper-cast-alloys/ %0 Journal Article %R 10.5545/sv-jme.2014.1857 %& 832 %P 6 %J Strojniški vestnik - Journal of Mechanical Engineering %V 60 %N 12 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Barlas, Zafer, & Murat Çolak. "Evaluation of the Influence of Upset Stage on Joint Properties of Friction Welded Dissimilar Aluminum-Copper Cast Alloys." Strojniški vestnik - Journal of Mechanical Engineering [Online], 60.12 (2014): 832-837. Web. 19 Nov. 2024
TY - JOUR AU - Barlas, Zafer AU - Çolak, Murat PY - 2014 TI - Evaluation of the Influence of Upset Stage on Joint Properties of Friction Welded Dissimilar Aluminum-Copper Cast Alloys JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2014.1857 KW - friction welding; Al-Cu cast alloy; upset stage; tensile strength; microstructure; weld temperature N2 - Friction welding was applied to dissimilar aluminum cast bars alloyed with 2 and 8% copper and the effects of upset time on joint properties were evaluated in this study. The welding process was carried out by a vertical milling machine. Tensile test results show that the ultimate tensile strength increased with an increase in upset time and it reached 88% for Al-2%Cu and 74% for Al-8%Cu base metals. The heat affected zone, thermo-mechanical affected zone, and weld metal were detected in this joint by optical examination, in addition to the base metals. A peak temperature of 436 °C was measured in the weld zone. Hardness values also varied according to microstructural changes. The highest hardness values were detected in the weld metal and its average hardness was 217 Brinell. UR - https://www.sv-jme.eu/article/evaluation-of-the-influence-of-upset-stage-on-joint-properties-of-friction-welded-dissimilar-aluminum-copper-cast-alloys/
@article{{sv-jme}{sv-jme.2014.1857},
author = {Barlas, Z., Çolak, M.},
title = {Evaluation of the Influence of Upset Stage on Joint Properties of Friction Welded Dissimilar Aluminum-Copper Cast Alloys},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {60},
number = {12},
year = {2014},
doi = {10.5545/sv-jme.2014.1857},
url = {https://www.sv-jme.eu/article/evaluation-of-the-influence-of-upset-stage-on-joint-properties-of-friction-welded-dissimilar-aluminum-copper-cast-alloys/}
}
TY - JOUR AU - Barlas, Zafer AU - Çolak, Murat PY - 2018/06/28 TI - Evaluation of the Influence of Upset Stage on Joint Properties of Friction Welded Dissimilar Aluminum-Copper Cast Alloys JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 60, No 12 (2014): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2014.1857 KW - friction welding, Al-Cu cast alloy, upset stage, tensile strength, microstructure, weld temperature N2 - Friction welding was applied to dissimilar aluminum cast bars alloyed with 2 and 8% copper and the effects of upset time on joint properties were evaluated in this study. The welding process was carried out by a vertical milling machine. Tensile test results show that the ultimate tensile strength increased with an increase in upset time and it reached 88% for Al-2%Cu and 74% for Al-8%Cu base metals. The heat affected zone, thermo-mechanical affected zone, and weld metal were detected in this joint by optical examination, in addition to the base metals. A peak temperature of 436 °C was measured in the weld zone. Hardness values also varied according to microstructural changes. The highest hardness values were detected in the weld metal and its average hardness was 217 Brinell. UR - https://www.sv-jme.eu/article/evaluation-of-the-influence-of-upset-stage-on-joint-properties-of-friction-welded-dissimilar-aluminum-copper-cast-alloys/
Barlas, Zafer, AND Çolak, Murat. "Evaluation of the Influence of Upset Stage on Joint Properties of Friction Welded Dissimilar Aluminum-Copper Cast Alloys" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 60 Number 12 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 60(2014)12, 832-837
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Friction welding was applied to dissimilar aluminum cast bars alloyed with 2 and 8% copper and the effects of upset time on joint properties were evaluated in this study. The welding process was carried out by a vertical milling machine. Tensile test results show that the ultimate tensile strength increased with an increase in upset time and it reached 88% for Al-2%Cu and 74% for Al-8%Cu base metals. The heat affected zone, thermo-mechanical affected zone, and weld metal were detected in this joint by optical examination, in addition to the base metals. A peak temperature of 436 °C was measured in the weld zone. Hardness values also varied according to microstructural changes. The highest hardness values were detected in the weld metal and its average hardness was 217 Brinell.