LOVREC, Darko ;TIČ, Vito . Energy Saving Cooling-Unit for Plastic Moulding Machine. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.2, p. 83-90, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/energy-saving-cooling-unit-for-plastic-moulding-machine/>. Date accessed: 22 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2010.082.
Lovrec, D., & Tič, V. (2011). Energy Saving Cooling-Unit for Plastic Moulding Machine. Strojniški vestnik - Journal of Mechanical Engineering, 57(2), 83-90. doi:http://dx.doi.org/10.5545/sv-jme.2010.082
@article{sv-jmesv-jme.2010.082,
author = {Darko Lovrec and Vito Tič},
title = {Energy Saving Cooling-Unit for Plastic Moulding Machine},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {57},
number = {2},
year = {2011},
keywords = {scompressed air; cooling; blow moulding machine},
abstract = {Compressed air is one of the major sources of energy consumption and also one of the most expensive types of energy. Consequently, special attention must be paid to its rational use. This is especially important in cases where compressed air is blowed into an ”empty” space. All cleaning and cooling processes using compressed air are typical examples of such applications. They are the most wasteful consumers of compressed air. Measures to minimize air consumption in such cases are presented in the paper. The highly efficient cooling unit for plastic moulding machines has been designed and optimized based on CFD simulation, and then produced using RP/RM (Rapid Prototyping / Manufacturing) manufacturing technology. The developed and specially designed nozzle-system was used for cooling purposes during plastic canister manufacturing. The previously-used conventional cooling system had so far been recognized as the most wasteful compressed air consumer in the company. The newly-designed air-efficient cooling unit, with increased capacity for cooling air, allows for up to 50% energy savings regarding compressed air.},
issn = {0039-2480}, pages = {83-90}, doi = {10.5545/sv-jme.2010.082},
url = {https://www.sv-jme.eu/article/energy-saving-cooling-unit-for-plastic-moulding-machine/}
}
Lovrec, D.,Tič, V. 2011 June 57. Energy Saving Cooling-Unit for Plastic Moulding Machine. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:2
%A Lovrec, Darko %A Tič, Vito %D 2011 %T Energy Saving Cooling-Unit for Plastic Moulding Machine %B 2011 %9 scompressed air; cooling; blow moulding machine %! Energy Saving Cooling-Unit for Plastic Moulding Machine %K scompressed air; cooling; blow moulding machine %X Compressed air is one of the major sources of energy consumption and also one of the most expensive types of energy. Consequently, special attention must be paid to its rational use. This is especially important in cases where compressed air is blowed into an ”empty” space. All cleaning and cooling processes using compressed air are typical examples of such applications. They are the most wasteful consumers of compressed air. Measures to minimize air consumption in such cases are presented in the paper. The highly efficient cooling unit for plastic moulding machines has been designed and optimized based on CFD simulation, and then produced using RP/RM (Rapid Prototyping / Manufacturing) manufacturing technology. The developed and specially designed nozzle-system was used for cooling purposes during plastic canister manufacturing. The previously-used conventional cooling system had so far been recognized as the most wasteful compressed air consumer in the company. The newly-designed air-efficient cooling unit, with increased capacity for cooling air, allows for up to 50% energy savings regarding compressed air. %U https://www.sv-jme.eu/article/energy-saving-cooling-unit-for-plastic-moulding-machine/ %0 Journal Article %R 10.5545/sv-jme.2010.082 %& 83 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 57 %N 2 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Lovrec, Darko, & Vito Tič. "Energy Saving Cooling-Unit for Plastic Moulding Machine." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.2 (2011): 83-90. Web. 22 Nov. 2024
TY - JOUR AU - Lovrec, Darko AU - Tič, Vito PY - 2011 TI - Energy Saving Cooling-Unit for Plastic Moulding Machine JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2010.082 KW - scompressed air; cooling; blow moulding machine N2 - Compressed air is one of the major sources of energy consumption and also one of the most expensive types of energy. Consequently, special attention must be paid to its rational use. This is especially important in cases where compressed air is blowed into an ”empty” space. All cleaning and cooling processes using compressed air are typical examples of such applications. They are the most wasteful consumers of compressed air. Measures to minimize air consumption in such cases are presented in the paper. The highly efficient cooling unit for plastic moulding machines has been designed and optimized based on CFD simulation, and then produced using RP/RM (Rapid Prototyping / Manufacturing) manufacturing technology. The developed and specially designed nozzle-system was used for cooling purposes during plastic canister manufacturing. The previously-used conventional cooling system had so far been recognized as the most wasteful compressed air consumer in the company. The newly-designed air-efficient cooling unit, with increased capacity for cooling air, allows for up to 50% energy savings regarding compressed air. UR - https://www.sv-jme.eu/article/energy-saving-cooling-unit-for-plastic-moulding-machine/
@article{{sv-jme}{sv-jme.2010.082},
author = {Lovrec, D., Tič, V.},
title = {Energy Saving Cooling-Unit for Plastic Moulding Machine},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {57},
number = {2},
year = {2011},
doi = {10.5545/sv-jme.2010.082},
url = {https://www.sv-jme.eu/article/energy-saving-cooling-unit-for-plastic-moulding-machine/}
}
TY - JOUR AU - Lovrec, Darko AU - Tič, Vito PY - 2018/06/28 TI - Energy Saving Cooling-Unit for Plastic Moulding Machine JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 2 (2011): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2010.082 KW - scompressed air, cooling, blow moulding machine N2 - Compressed air is one of the major sources of energy consumption and also one of the most expensive types of energy. Consequently, special attention must be paid to its rational use. This is especially important in cases where compressed air is blowed into an ”empty” space. All cleaning and cooling processes using compressed air are typical examples of such applications. They are the most wasteful consumers of compressed air. Measures to minimize air consumption in such cases are presented in the paper. The highly efficient cooling unit for plastic moulding machines has been designed and optimized based on CFD simulation, and then produced using RP/RM (Rapid Prototyping / Manufacturing) manufacturing technology. The developed and specially designed nozzle-system was used for cooling purposes during plastic canister manufacturing. The previously-used conventional cooling system had so far been recognized as the most wasteful compressed air consumer in the company. The newly-designed air-efficient cooling unit, with increased capacity for cooling air, allows for up to 50% energy savings regarding compressed air. UR - https://www.sv-jme.eu/article/energy-saving-cooling-unit-for-plastic-moulding-machine/
Lovrec, Darko, AND Tič, Vito. "Energy Saving Cooling-Unit for Plastic Moulding Machine" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 2 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 57(2011)2, 83-90
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Compressed air is one of the major sources of energy consumption and also one of the most expensive types of energy. Consequently, special attention must be paid to its rational use. This is especially important in cases where compressed air is blowed into an ”empty” space. All cleaning and cooling processes using compressed air are typical examples of such applications. They are the most wasteful consumers of compressed air. Measures to minimize air consumption in such cases are presented in the paper. The highly efficient cooling unit for plastic moulding machines has been designed and optimized based on CFD simulation, and then produced using RP/RM (Rapid Prototyping / Manufacturing) manufacturing technology. The developed and specially designed nozzle-system was used for cooling purposes during plastic canister manufacturing. The previously-used conventional cooling system had so far been recognized as the most wasteful compressed air consumer in the company. The newly-designed air-efficient cooling unit, with increased capacity for cooling air, allows for up to 50% energy savings regarding compressed air.