KNEZ, Marko ;KRAMBERGER, Janez ;GLODEŽ, Srečko . Determination of the Low-Cycle Fatigue Parameters of S1100Q High-Strength Steel. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 53, n.4, p. 253-264, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/determination-of-the-low-cycle-fatigue-parameters-of-s1100q-high-strength-steel/>. Date accessed: 23 dec. 2024. doi:http://dx.doi.org/.
Knez, M., Kramberger, J., & Glodež, S. (2007). Determination of the Low-Cycle Fatigue Parameters of S1100Q High-Strength Steel. Strojniški vestnik - Journal of Mechanical Engineering, 53(4), 253-264. doi:http://dx.doi.org/
@article{., author = {Marko Knez and Janez Kramberger and Srečko Glodež}, title = {Determination of the Low-Cycle Fatigue Parameters of S1100Q High-Strength Steel}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {53}, number = {4}, year = {2007}, keywords = {strain-life approach; fatigue; life times; numerical calculations; }, abstract = {We designed an experimental investigation to determine the fatigue properties of the high-strength steel S1100Q, which is often used in highly loaded machine components and structures, e.g., mobile cranes, to reduce weight. Fatigue tests were carried out in a low-cycle regime according to the ASTM E 606 standard, where standardized, uniform-gauge test specimens are used. On the basis of the experimental results the appropriate low-cycle fatigue parameters were determined using the calculation procedure described in ASTM E 606. In the second part of the paper, a service-life evaluation of the counterweight of a mobile crane by means of a computational analysis is presented. The computational analysis was performed using the local strain-life approach (e-N), where the appropriate material properties for treated high-strength S1100Q steel were used. The experimental fatigue tests on the bars were carried out in a specially constructed hydraulic pulsation test machine. The comparison of the computational and experimental results showed a reasonable agreement.}, issn = {0039-2480}, pages = {253-264}, doi = {}, url = {https://www.sv-jme.eu/article/determination-of-the-low-cycle-fatigue-parameters-of-s1100q-high-strength-steel/} }
Knez, M.,Kramberger, J.,Glodež, S. 2007 August 53. Determination of the Low-Cycle Fatigue Parameters of S1100Q High-Strength Steel. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 53:4
%A Knez, Marko %A Kramberger, Janez %A Glodež, Srečko %D 2007 %T Determination of the Low-Cycle Fatigue Parameters of S1100Q High-Strength Steel %B 2007 %9 strain-life approach; fatigue; life times; numerical calculations; %! Determination of the Low-Cycle Fatigue Parameters of S1100Q High-Strength Steel %K strain-life approach; fatigue; life times; numerical calculations; %X We designed an experimental investigation to determine the fatigue properties of the high-strength steel S1100Q, which is often used in highly loaded machine components and structures, e.g., mobile cranes, to reduce weight. Fatigue tests were carried out in a low-cycle regime according to the ASTM E 606 standard, where standardized, uniform-gauge test specimens are used. On the basis of the experimental results the appropriate low-cycle fatigue parameters were determined using the calculation procedure described in ASTM E 606. In the second part of the paper, a service-life evaluation of the counterweight of a mobile crane by means of a computational analysis is presented. The computational analysis was performed using the local strain-life approach (e-N), where the appropriate material properties for treated high-strength S1100Q steel were used. The experimental fatigue tests on the bars were carried out in a specially constructed hydraulic pulsation test machine. The comparison of the computational and experimental results showed a reasonable agreement. %U https://www.sv-jme.eu/article/determination-of-the-low-cycle-fatigue-parameters-of-s1100q-high-strength-steel/ %0 Journal Article %R %& 253 %P 12 %J Strojniški vestnik - Journal of Mechanical Engineering %V 53 %N 4 %@ 0039-2480 %8 2017-08-18 %7 2017-08-18
Knez, Marko, Janez Kramberger, & Srečko Glodež. "Determination of the Low-Cycle Fatigue Parameters of S1100Q High-Strength Steel." Strojniški vestnik - Journal of Mechanical Engineering [Online], 53.4 (2007): 253-264. Web. 23 Dec. 2024
TY - JOUR AU - Knez, Marko AU - Kramberger, Janez AU - Glodež, Srečko PY - 2007 TI - Determination of the Low-Cycle Fatigue Parameters of S1100Q High-Strength Steel JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - strain-life approach; fatigue; life times; numerical calculations; N2 - We designed an experimental investigation to determine the fatigue properties of the high-strength steel S1100Q, which is often used in highly loaded machine components and structures, e.g., mobile cranes, to reduce weight. Fatigue tests were carried out in a low-cycle regime according to the ASTM E 606 standard, where standardized, uniform-gauge test specimens are used. On the basis of the experimental results the appropriate low-cycle fatigue parameters were determined using the calculation procedure described in ASTM E 606. In the second part of the paper, a service-life evaluation of the counterweight of a mobile crane by means of a computational analysis is presented. The computational analysis was performed using the local strain-life approach (e-N), where the appropriate material properties for treated high-strength S1100Q steel were used. The experimental fatigue tests on the bars were carried out in a specially constructed hydraulic pulsation test machine. The comparison of the computational and experimental results showed a reasonable agreement. UR - https://www.sv-jme.eu/article/determination-of-the-low-cycle-fatigue-parameters-of-s1100q-high-strength-steel/
@article{{}{.}, author = {Knez, M., Kramberger, J., Glodež, S.}, title = {Determination of the Low-Cycle Fatigue Parameters of S1100Q High-Strength Steel}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {53}, number = {4}, year = {2007}, doi = {}, url = {https://www.sv-jme.eu/article/determination-of-the-low-cycle-fatigue-parameters-of-s1100q-high-strength-steel/} }
TY - JOUR AU - Knez, Marko AU - Kramberger, Janez AU - Glodež, Srečko PY - 2017/08/18 TI - Determination of the Low-Cycle Fatigue Parameters of S1100Q High-Strength Steel JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 53, No 4 (2007): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - strain-life approach, fatigue, life times, numerical calculations, N2 - We designed an experimental investigation to determine the fatigue properties of the high-strength steel S1100Q, which is often used in highly loaded machine components and structures, e.g., mobile cranes, to reduce weight. Fatigue tests were carried out in a low-cycle regime according to the ASTM E 606 standard, where standardized, uniform-gauge test specimens are used. On the basis of the experimental results the appropriate low-cycle fatigue parameters were determined using the calculation procedure described in ASTM E 606. In the second part of the paper, a service-life evaluation of the counterweight of a mobile crane by means of a computational analysis is presented. The computational analysis was performed using the local strain-life approach (e-N), where the appropriate material properties for treated high-strength S1100Q steel were used. The experimental fatigue tests on the bars were carried out in a specially constructed hydraulic pulsation test machine. The comparison of the computational and experimental results showed a reasonable agreement. UR - https://www.sv-jme.eu/article/determination-of-the-low-cycle-fatigue-parameters-of-s1100q-high-strength-steel/
Knez, Marko, Kramberger, Janez, AND Glodež, Srečko. "Determination of the Low-Cycle Fatigue Parameters of S1100Q High-Strength Steel" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 53 Number 4 (18 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 53(2007)4, 253-264
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
We designed an experimental investigation to determine the fatigue properties of the high-strength steel S1100Q, which is often used in highly loaded machine components and structures, e.g., mobile cranes, to reduce weight. Fatigue tests were carried out in a low-cycle regime according to the ASTM E 606 standard, where standardized, uniform-gauge test specimens are used. On the basis of the experimental results the appropriate low-cycle fatigue parameters were determined using the calculation procedure described in ASTM E 606. In the second part of the paper, a service-life evaluation of the counterweight of a mobile crane by means of a computational analysis is presented. The computational analysis was performed using the local strain-life approach (e-N), where the appropriate material properties for treated high-strength S1100Q steel were used. The experimental fatigue tests on the bars were carried out in a specially constructed hydraulic pulsation test machine. The comparison of the computational and experimental results showed a reasonable agreement.