UMER, Usama ;BUTT, Shahid Ikramullah;ASKARI, Syed Jawid;XIE, Lijing ;DANISH, Syed Noman. Comparative Analyses for Different Modeling Methods in High Speed Turning Operations for Hardened Steel. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 54, n.12, p. 850-854, november 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/comparative-analyseys-for-different-modeling-methods-in-high-speed-turning-operations-for-hardened-steel/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/.
Umer, U., Butt, S., Askari, S., Xie, L., & Danish, S. (2008). Comparative Analyses for Different Modeling Methods in High Speed Turning Operations for Hardened Steel. Strojniški vestnik - Journal of Mechanical Engineering, 54(12), 850-854. doi:http://dx.doi.org/
@article{.,
author = {Usama Umer and Shahid Ikramullah Butt and Syed Jawid Askari and Lijing Xie and Syed Noman Danish},
title = {Comparative Analyses for Different Modeling Methods in High Speed Turning Operations for Hardened Steel},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {54},
number = {12},
year = {2008},
keywords = {high speed machining; finite element methods; AISI H13 steel; process modelling; },
abstract = {The modeling of metal cutting process has been a challenging research topic due to the difficulty in accurate modeling of the contact and work material deformation with large plastic strain and friction, high temperature and strain rate, and their coupling effect. Among different modeling methods, finite element method (FEM) has proven to be a robust tool in predicting process parameters and optimizing cutting tool geometry. However successful implementation of a modeling method depends mainly on numerical formulation technique adopted for chip formation. The two formulation techniques namely the Lagrangian and the Eulerian have been used in the past by many researchers. Due to the various limitations of the two approaches, a new arbitrary Lagrangian Eulerian (ALE) method has been adopted for the orthogonal high speed turning operations for AISI H13 hardened steel. This approach does not need any chip separation criterion. For comparative analysis with other techniques, two Lagrangian models with element deletion and node splitting methods were also simulated and compared with experimental data. It has been found that ALE model results are in good agreement with the experimental ones as compared to the Lagrangian models.},
issn = {0039-2480}, pages = {850-854}, doi = {},
url = {https://www.sv-jme.eu/article/comparative-analyseys-for-different-modeling-methods-in-high-speed-turning-operations-for-hardened-steel/}
}
Umer, U.,Butt, S.,Askari, S.,Xie, L.,Danish, S. 2008 November 54. Comparative Analyses for Different Modeling Methods in High Speed Turning Operations for Hardened Steel. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 54:12
%A Umer, Usama %A Butt, Shahid Ikramullah %A Askari, Syed Jawid %A Xie, Lijing %A Danish, Syed Noman %D 2008 %T Comparative Analyses for Different Modeling Methods in High Speed Turning Operations for Hardened Steel %B 2008 %9 high speed machining; finite element methods; AISI H13 steel; process modelling; %! Comparative Analyses for Different Modeling Methods in High Speed Turning Operations for Hardened Steel %K high speed machining; finite element methods; AISI H13 steel; process modelling; %X The modeling of metal cutting process has been a challenging research topic due to the difficulty in accurate modeling of the contact and work material deformation with large plastic strain and friction, high temperature and strain rate, and their coupling effect. Among different modeling methods, finite element method (FEM) has proven to be a robust tool in predicting process parameters and optimizing cutting tool geometry. However successful implementation of a modeling method depends mainly on numerical formulation technique adopted for chip formation. The two formulation techniques namely the Lagrangian and the Eulerian have been used in the past by many researchers. Due to the various limitations of the two approaches, a new arbitrary Lagrangian Eulerian (ALE) method has been adopted for the orthogonal high speed turning operations for AISI H13 hardened steel. This approach does not need any chip separation criterion. For comparative analysis with other techniques, two Lagrangian models with element deletion and node splitting methods were also simulated and compared with experimental data. It has been found that ALE model results are in good agreement with the experimental ones as compared to the Lagrangian models. %U https://www.sv-jme.eu/article/comparative-analyseys-for-different-modeling-methods-in-high-speed-turning-operations-for-hardened-steel/ %0 Journal Article %R %& 850 %P 5 %J Strojniški vestnik - Journal of Mechanical Engineering %V 54 %N 12 %@ 0039-2480 %8 2017-11-03 %7 2017-11-03
Umer, Usama, Shahid Ikramullah Butt, Syed Jawid Askari, Lijing Xie, & Syed Noman Danish. "Comparative Analyses for Different Modeling Methods in High Speed Turning Operations for Hardened Steel." Strojniški vestnik - Journal of Mechanical Engineering [Online], 54.12 (2008): 850-854. Web. 19 Nov. 2024
TY - JOUR AU - Umer, Usama AU - Butt, Shahid Ikramullah AU - Askari, Syed Jawid AU - Xie, Lijing AU - Danish, Syed Noman PY - 2008 TI - Comparative Analyses for Different Modeling Methods in High Speed Turning Operations for Hardened Steel JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - high speed machining; finite element methods; AISI H13 steel; process modelling; N2 - The modeling of metal cutting process has been a challenging research topic due to the difficulty in accurate modeling of the contact and work material deformation with large plastic strain and friction, high temperature and strain rate, and their coupling effect. Among different modeling methods, finite element method (FEM) has proven to be a robust tool in predicting process parameters and optimizing cutting tool geometry. However successful implementation of a modeling method depends mainly on numerical formulation technique adopted for chip formation. The two formulation techniques namely the Lagrangian and the Eulerian have been used in the past by many researchers. Due to the various limitations of the two approaches, a new arbitrary Lagrangian Eulerian (ALE) method has been adopted for the orthogonal high speed turning operations for AISI H13 hardened steel. This approach does not need any chip separation criterion. For comparative analysis with other techniques, two Lagrangian models with element deletion and node splitting methods were also simulated and compared with experimental data. It has been found that ALE model results are in good agreement with the experimental ones as compared to the Lagrangian models. UR - https://www.sv-jme.eu/article/comparative-analyseys-for-different-modeling-methods-in-high-speed-turning-operations-for-hardened-steel/
@article{{}{.},
author = {Umer, U., Butt, S., Askari, S., Xie, L., Danish, S.},
title = {Comparative Analyses for Different Modeling Methods in High Speed Turning Operations for Hardened Steel},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {54},
number = {12},
year = {2008},
doi = {},
url = {https://www.sv-jme.eu/article/comparative-analyseys-for-different-modeling-methods-in-high-speed-turning-operations-for-hardened-steel/}
}
TY - JOUR AU - Umer, Usama AU - Butt, Shahid Ikramullah AU - Askari, Syed Jawid AU - Xie, Lijing AU - Danish, Syed Noman PY - 2017/11/03 TI - Comparative Analyses for Different Modeling Methods in High Speed Turning Operations for Hardened Steel JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 54, No 12 (2008): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - high speed machining, finite element methods, AISI H13 steel, process modelling, N2 - The modeling of metal cutting process has been a challenging research topic due to the difficulty in accurate modeling of the contact and work material deformation with large plastic strain and friction, high temperature and strain rate, and their coupling effect. Among different modeling methods, finite element method (FEM) has proven to be a robust tool in predicting process parameters and optimizing cutting tool geometry. However successful implementation of a modeling method depends mainly on numerical formulation technique adopted for chip formation. The two formulation techniques namely the Lagrangian and the Eulerian have been used in the past by many researchers. Due to the various limitations of the two approaches, a new arbitrary Lagrangian Eulerian (ALE) method has been adopted for the orthogonal high speed turning operations for AISI H13 hardened steel. This approach does not need any chip separation criterion. For comparative analysis with other techniques, two Lagrangian models with element deletion and node splitting methods were also simulated and compared with experimental data. It has been found that ALE model results are in good agreement with the experimental ones as compared to the Lagrangian models. UR - https://www.sv-jme.eu/article/comparative-analyseys-for-different-modeling-methods-in-high-speed-turning-operations-for-hardened-steel/
Umer, Usama, Butt, Shahid, Askari, Syed, Xie, Lijing, AND Danish, Syed. "Comparative Analyses for Different Modeling Methods in High Speed Turning Operations for Hardened Steel" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 54 Number 12 (03 November 2017)
Strojniški vestnik - Journal of Mechanical Engineering 54(2008)12, 850-854
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The modeling of metal cutting process has been a challenging research topic due to the difficulty in accurate modeling of the contact and work material deformation with large plastic strain and friction, high temperature and strain rate, and their coupling effect. Among different modeling methods, finite element method (FEM) has proven to be a robust tool in predicting process parameters and optimizing cutting tool geometry. However successful implementation of a modeling method depends mainly on numerical formulation technique adopted for chip formation. The two formulation techniques namely the Lagrangian and the Eulerian have been used in the past by many researchers. Due to the various limitations of the two approaches, a new arbitrary Lagrangian Eulerian (ALE) method has been adopted for the orthogonal high speed turning operations for AISI H13 hardened steel. This approach does not need any chip separation criterion. For comparative analysis with other techniques, two Lagrangian models with element deletion and node splitting methods were also simulated and compared with experimental data. It has been found that ALE model results are in good agreement with the experimental ones as compared to the Lagrangian models.