MOSLEMI, Mohsen ;KHOSHRAVAN, Mohammadreza . Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 61, n.9, p. 507-516, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/cohesive-zone-parameters-selection-for-mode-i-prediction-of-interfacial-delamination/>. Date accessed: 19 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2015.2521.
Moslemi, M., & Khoshravan, M. (2015). Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination. Strojniški vestnik - Journal of Mechanical Engineering, 61(9), 507-516. doi:http://dx.doi.org/10.5545/sv-jme.2015.2521
@article{sv-jmesv-jme.2015.2521,
author = {Mohsen Moslemi and Mohammadreza Khoshravan},
title = {Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {61},
number = {9},
year = {2015},
keywords = {cohesive zone model; delamination; normal cohesive strength; finite element prediction},
abstract = {In order to determine the normal cohesive strength of composite laminates, a new test methodology was proposed. The values of cohesive zone parameters (the cohesive strength and the separation energy) for mode I interlamiar fracture of E-glass/epoxy woven fabrication were computed from a series of experimental tests. Cohesive zone model simulation based on interface finite elements was conducted. A modified form of the Park-Paulino-Roesler (PPR) traction-separation law together with a bilinear mixed-mode damage model was used to simulate the damage processes, using Abaqus cohesive elements. The numerical results were compared with experimental tests and confirmed the adequacy of normal cohesive strength. To ensure the sufficient dissipation of energy that successfully predicts delamination onset and propagation, cohesive zone length and minimum number of cohesive elements at cohesive zone length were determined. Interfacial penalty stiffness and the resistance curve of the composite specimen were also computed. The results show that the modified PPR model accurately simulates the fracture process zone ahead of the crack tip as compared to the bilinear model.},
issn = {0039-2480}, pages = {507-516}, doi = {10.5545/sv-jme.2015.2521},
url = {https://www.sv-jme.eu/article/cohesive-zone-parameters-selection-for-mode-i-prediction-of-interfacial-delamination/}
}
Moslemi, M.,Khoshravan, M. 2015 June 61. Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 61:9
%A Moslemi, Mohsen %A Khoshravan, Mohammadreza %D 2015 %T Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination %B 2015 %9 cohesive zone model; delamination; normal cohesive strength; finite element prediction %! Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination %K cohesive zone model; delamination; normal cohesive strength; finite element prediction %X In order to determine the normal cohesive strength of composite laminates, a new test methodology was proposed. The values of cohesive zone parameters (the cohesive strength and the separation energy) for mode I interlamiar fracture of E-glass/epoxy woven fabrication were computed from a series of experimental tests. Cohesive zone model simulation based on interface finite elements was conducted. A modified form of the Park-Paulino-Roesler (PPR) traction-separation law together with a bilinear mixed-mode damage model was used to simulate the damage processes, using Abaqus cohesive elements. The numerical results were compared with experimental tests and confirmed the adequacy of normal cohesive strength. To ensure the sufficient dissipation of energy that successfully predicts delamination onset and propagation, cohesive zone length and minimum number of cohesive elements at cohesive zone length were determined. Interfacial penalty stiffness and the resistance curve of the composite specimen were also computed. The results show that the modified PPR model accurately simulates the fracture process zone ahead of the crack tip as compared to the bilinear model. %U https://www.sv-jme.eu/article/cohesive-zone-parameters-selection-for-mode-i-prediction-of-interfacial-delamination/ %0 Journal Article %R 10.5545/sv-jme.2015.2521 %& 507 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 61 %N 9 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Moslemi, Mohsen, & Mohammadreza Khoshravan. "Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination." Strojniški vestnik - Journal of Mechanical Engineering [Online], 61.9 (2015): 507-516. Web. 19 Nov. 2024
TY - JOUR AU - Moslemi, Mohsen AU - Khoshravan, Mohammadreza PY - 2015 TI - Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.2521 KW - cohesive zone model; delamination; normal cohesive strength; finite element prediction N2 - In order to determine the normal cohesive strength of composite laminates, a new test methodology was proposed. The values of cohesive zone parameters (the cohesive strength and the separation energy) for mode I interlamiar fracture of E-glass/epoxy woven fabrication were computed from a series of experimental tests. Cohesive zone model simulation based on interface finite elements was conducted. A modified form of the Park-Paulino-Roesler (PPR) traction-separation law together with a bilinear mixed-mode damage model was used to simulate the damage processes, using Abaqus cohesive elements. The numerical results were compared with experimental tests and confirmed the adequacy of normal cohesive strength. To ensure the sufficient dissipation of energy that successfully predicts delamination onset and propagation, cohesive zone length and minimum number of cohesive elements at cohesive zone length were determined. Interfacial penalty stiffness and the resistance curve of the composite specimen were also computed. The results show that the modified PPR model accurately simulates the fracture process zone ahead of the crack tip as compared to the bilinear model. UR - https://www.sv-jme.eu/article/cohesive-zone-parameters-selection-for-mode-i-prediction-of-interfacial-delamination/
@article{{sv-jme}{sv-jme.2015.2521},
author = {Moslemi, M., Khoshravan, M.},
title = {Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {61},
number = {9},
year = {2015},
doi = {10.5545/sv-jme.2015.2521},
url = {https://www.sv-jme.eu/article/cohesive-zone-parameters-selection-for-mode-i-prediction-of-interfacial-delamination/}
}
TY - JOUR AU - Moslemi, Mohsen AU - Khoshravan, Mohammadreza PY - 2018/06/27 TI - Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 61, No 9 (2015): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.2521 KW - cohesive zone model, delamination, normal cohesive strength, finite element prediction N2 - In order to determine the normal cohesive strength of composite laminates, a new test methodology was proposed. The values of cohesive zone parameters (the cohesive strength and the separation energy) for mode I interlamiar fracture of E-glass/epoxy woven fabrication were computed from a series of experimental tests. Cohesive zone model simulation based on interface finite elements was conducted. A modified form of the Park-Paulino-Roesler (PPR) traction-separation law together with a bilinear mixed-mode damage model was used to simulate the damage processes, using Abaqus cohesive elements. The numerical results were compared with experimental tests and confirmed the adequacy of normal cohesive strength. To ensure the sufficient dissipation of energy that successfully predicts delamination onset and propagation, cohesive zone length and minimum number of cohesive elements at cohesive zone length were determined. Interfacial penalty stiffness and the resistance curve of the composite specimen were also computed. The results show that the modified PPR model accurately simulates the fracture process zone ahead of the crack tip as compared to the bilinear model. UR - https://www.sv-jme.eu/article/cohesive-zone-parameters-selection-for-mode-i-prediction-of-interfacial-delamination/
Moslemi, Mohsen, AND Khoshravan, Mohammadreza. "Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 61 Number 9 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 61(2015)9, 507-516
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In order to determine the normal cohesive strength of composite laminates, a new test methodology was proposed. The values of cohesive zone parameters (the cohesive strength and the separation energy) for mode I interlamiar fracture of E-glass/epoxy woven fabrication were computed from a series of experimental tests. Cohesive zone model simulation based on interface finite elements was conducted. A modified form of the Park-Paulino-Roesler (PPR) traction-separation law together with a bilinear mixed-mode damage model was used to simulate the damage processes, using Abaqus cohesive elements. The numerical results were compared with experimental tests and confirmed the adequacy of normal cohesive strength. To ensure the sufficient dissipation of energy that successfully predicts delamination onset and propagation, cohesive zone length and minimum number of cohesive elements at cohesive zone length were determined. Interfacial penalty stiffness and the resistance curve of the composite specimen were also computed. The results show that the modified PPR model accurately simulates the fracture process zone ahead of the crack tip as compared to the bilinear model.