An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature

2649 Views
2924 Downloads
Export citation: ABNT
MILER, Daniel ;ŠKEC, Stanko ;KATANA, Branko ;ŽEŽELJ, Dragan .
An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 65, n.10, p. 547-556, october 2019. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/an-experimental-study-of-composite-plain-bearings-influence-of-clearance-on-friction-coefficient-and-temperature/>. Date accessed: 29 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2019.6108.
Miler, D., Škec, S., Katana, B., & Žeželj, D.
(2019).
An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature.
Strojniški vestnik - Journal of Mechanical Engineering, 65(10), 547-556.
doi:http://dx.doi.org/10.5545/sv-jme.2019.6108
@article{sv-jmesv-jme.2019.6108,
	author = {Daniel  Miler and Stanko  Škec and Branko  Katana and Dragan  Žeželj},
	title = {An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {65},
	number = {10},
	year = {2019},
	keywords = {clearance, composite, friction coefficient, plain bearing},
	abstract = {Plain bearings are often used due to their compact dimensions and low cost. Their frictional and wear properties are affected by several parameters: load, sliding velocity, temperature, and surface roughness, among others. In this article, the authors have experimentally investigated the influence of clearance size on the friction and wear in composite plain bearings. An experimental rig was designed to enable the testing of plain bearings in working conditions similar to those encountered throughout their exploitation. Two load levels, two lubrication types, and four clearance levels were varied, resulting in 48 experiments, as each was replicated twice. The friction coefficient and bearing temperature were measured during the experiment, while the material loss and change in surface roughness were determined post-experiment. The results have shown that clearance affects the friction in both the dry running specimens and specimens lubricated using a solid lubricant (polytetrafluoroethylene).},
	issn = {0039-2480},	pages = {547-556},	doi = {10.5545/sv-jme.2019.6108},
	url = {https://www.sv-jme.eu/article/an-experimental-study-of-composite-plain-bearings-influence-of-clearance-on-friction-coefficient-and-temperature/}
}
Miler, D.,Škec, S.,Katana, B.,Žeželj, D.
2019 October 65. An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 65:10
%A Miler, Daniel 
%A Škec, Stanko 
%A Katana, Branko 
%A Žeželj, Dragan 
%D 2019
%T An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature
%B 2019
%9 clearance, composite, friction coefficient, plain bearing
%! An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature
%K clearance, composite, friction coefficient, plain bearing
%X Plain bearings are often used due to their compact dimensions and low cost. Their frictional and wear properties are affected by several parameters: load, sliding velocity, temperature, and surface roughness, among others. In this article, the authors have experimentally investigated the influence of clearance size on the friction and wear in composite plain bearings. An experimental rig was designed to enable the testing of plain bearings in working conditions similar to those encountered throughout their exploitation. Two load levels, two lubrication types, and four clearance levels were varied, resulting in 48 experiments, as each was replicated twice. The friction coefficient and bearing temperature were measured during the experiment, while the material loss and change in surface roughness were determined post-experiment. The results have shown that clearance affects the friction in both the dry running specimens and specimens lubricated using a solid lubricant (polytetrafluoroethylene).
%U https://www.sv-jme.eu/article/an-experimental-study-of-composite-plain-bearings-influence-of-clearance-on-friction-coefficient-and-temperature/
%0 Journal Article
%R 10.5545/sv-jme.2019.6108
%& 547
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 65
%N 10
%@ 0039-2480
%8 2019-10-17
%7 2019-10-17
Miler, Daniel, Stanko  Škec, Branko  Katana, & Dragan  Žeželj.
"An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature." Strojniški vestnik - Journal of Mechanical Engineering [Online], 65.10 (2019): 547-556. Web.  29 Dec. 2024
TY  - JOUR
AU  - Miler, Daniel 
AU  - Škec, Stanko 
AU  - Katana, Branko 
AU  - Žeželj, Dragan 
PY  - 2019
TI  - An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2019.6108
KW  - clearance, composite, friction coefficient, plain bearing
N2  - Plain bearings are often used due to their compact dimensions and low cost. Their frictional and wear properties are affected by several parameters: load, sliding velocity, temperature, and surface roughness, among others. In this article, the authors have experimentally investigated the influence of clearance size on the friction and wear in composite plain bearings. An experimental rig was designed to enable the testing of plain bearings in working conditions similar to those encountered throughout their exploitation. Two load levels, two lubrication types, and four clearance levels were varied, resulting in 48 experiments, as each was replicated twice. The friction coefficient and bearing temperature were measured during the experiment, while the material loss and change in surface roughness were determined post-experiment. The results have shown that clearance affects the friction in both the dry running specimens and specimens lubricated using a solid lubricant (polytetrafluoroethylene).
UR  - https://www.sv-jme.eu/article/an-experimental-study-of-composite-plain-bearings-influence-of-clearance-on-friction-coefficient-and-temperature/
@article{{sv-jme}{sv-jme.2019.6108},
	author = {Miler, D., Škec, S., Katana, B., Žeželj, D.},
	title = {An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {65},
	number = {10},
	year = {2019},
	doi = {10.5545/sv-jme.2019.6108},
	url = {https://www.sv-jme.eu/article/an-experimental-study-of-composite-plain-bearings-influence-of-clearance-on-friction-coefficient-and-temperature/}
}
TY  - JOUR
AU  - Miler, Daniel 
AU  - Škec, Stanko 
AU  - Katana, Branko 
AU  - Žeželj, Dragan 
PY  - 2019/10/17
TI  - An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 65, No 10 (2019): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2019.6108
KW  - clearance, composite, friction coefficient, plain bearing
N2  - Plain bearings are often used due to their compact dimensions and low cost. Their frictional and wear properties are affected by several parameters: load, sliding velocity, temperature, and surface roughness, among others. In this article, the authors have experimentally investigated the influence of clearance size on the friction and wear in composite plain bearings. An experimental rig was designed to enable the testing of plain bearings in working conditions similar to those encountered throughout their exploitation. Two load levels, two lubrication types, and four clearance levels were varied, resulting in 48 experiments, as each was replicated twice. The friction coefficient and bearing temperature were measured during the experiment, while the material loss and change in surface roughness were determined post-experiment. The results have shown that clearance affects the friction in both the dry running specimens and specimens lubricated using a solid lubricant (polytetrafluoroethylene).
UR  - https://www.sv-jme.eu/article/an-experimental-study-of-composite-plain-bearings-influence-of-clearance-on-friction-coefficient-and-temperature/
Miler, Daniel, Škec, Stanko, Katana, Branko, AND Žeželj, Dragan.
"An Experimental Study of Composite Plain Bearings: The Influence of Clearance on Friction Coefficient and Temperature" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 65 Number 10 (17 October 2019)

Authors

Affiliations

  • University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia 1

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 65(2019)10, 547-556
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2019.6108

Plain bearings are often used due to their compact dimensions and low cost. Their frictional and wear properties are affected by several parameters: load, sliding velocity, temperature, and surface roughness, among others. In this article, the authors have experimentally investigated the influence of clearance size on the friction and wear in composite plain bearings. An experimental rig was designed to enable the testing of plain bearings in working conditions similar to those encountered throughout their exploitation. Two load levels, two lubrication types, and four clearance levels were varied, resulting in 48 experiments, as each was replicated twice. The friction coefficient and bearing temperature were measured during the experiment, while the material loss and change in surface roughness were determined post-experiment. The results have shown that clearance affects the friction in both the dry running specimens and specimens lubricated using a solid lubricant (polytetrafluoroethylene).

clearance, composite, friction coefficient, plain bearing