BAŠIČ, Sanib ;ŠKERGET, Leopold ;HRIBERŠEK, Matjaž . A Thermohydraulic Analysis of a Liquefied-Petroleum-Gas Revaporizer. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 49, n.6, p. 322-345, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/a-thermohydraulic-analysis-of-a-liquefied-petroleum-gas-revaporizer/>. Date accessed: 23 dec. 2024. doi:http://dx.doi.org/.
Bašič, S., Škerget, L., & Hriberšek, M. (2003). A Thermohydraulic Analysis of a Liquefied-Petroleum-Gas Revaporizer. Strojniški vestnik - Journal of Mechanical Engineering, 49(6), 322-345. doi:http://dx.doi.org/
@article{.,
author = {Sanib Bašič and Leopold Škerget and Matjaž Hriberšek},
title = {A Thermohydraulic Analysis of a Liquefied-Petroleum-Gas Revaporizer},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {49},
number = {6},
year = {2003},
keywords = {heat transfer; vaporizers; thermohydraulic analysis; liquified petroleum gas; },
abstract = {This paper deals with the thermohydraulic characteristics of an electrical liquefied-petroleum-gas (LPG) revaporizer. To begin with both the revaporizers description and its working performances are presented. The main goals of the analysis are defined and the quasi-axisymmetrical revaporizer section is introduced. The governing equations for Newtonian fluid flow in the region of the secondary liquid and for flow through a porous heater are presented. The boundary conditions on the computational region boundaries are prescribed. Further, basic empirical corelations for the evaluation of the transport phenomena within the individual revaporizer zones are presented. Special attention is devoted to the convective boiling process of the binary mixture in helically coiled tubes. The iterative calculating procedure with which we finally reached the working state of the device is explained. At the end the achieved results are discussed with comments and conclusions included. The operating point of the revaporizer was to lie inside the prescribed temperature range for the selected combination of process parameters.},
issn = {0039-2480}, pages = {322-345}, doi = {},
url = {https://www.sv-jme.eu/article/a-thermohydraulic-analysis-of-a-liquefied-petroleum-gas-revaporizer/}
}
Bašič, S.,Škerget, L.,Hriberšek, M. 2003 July 49. A Thermohydraulic Analysis of a Liquefied-Petroleum-Gas Revaporizer. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 49:6
%A Bašič, Sanib %A Škerget, Leopold %A Hriberšek, Matjaž %D 2003 %T A Thermohydraulic Analysis of a Liquefied-Petroleum-Gas Revaporizer %B 2003 %9 heat transfer; vaporizers; thermohydraulic analysis; liquified petroleum gas; %! A Thermohydraulic Analysis of a Liquefied-Petroleum-Gas Revaporizer %K heat transfer; vaporizers; thermohydraulic analysis; liquified petroleum gas; %X This paper deals with the thermohydraulic characteristics of an electrical liquefied-petroleum-gas (LPG) revaporizer. To begin with both the revaporizers description and its working performances are presented. The main goals of the analysis are defined and the quasi-axisymmetrical revaporizer section is introduced. The governing equations for Newtonian fluid flow in the region of the secondary liquid and for flow through a porous heater are presented. The boundary conditions on the computational region boundaries are prescribed. Further, basic empirical corelations for the evaluation of the transport phenomena within the individual revaporizer zones are presented. Special attention is devoted to the convective boiling process of the binary mixture in helically coiled tubes. The iterative calculating procedure with which we finally reached the working state of the device is explained. At the end the achieved results are discussed with comments and conclusions included. The operating point of the revaporizer was to lie inside the prescribed temperature range for the selected combination of process parameters. %U https://www.sv-jme.eu/article/a-thermohydraulic-analysis-of-a-liquefied-petroleum-gas-revaporizer/ %0 Journal Article %R %& 322 %P 24 %J Strojniški vestnik - Journal of Mechanical Engineering %V 49 %N 6 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Bašič, Sanib, Leopold Škerget, & Matjaž Hriberšek. "A Thermohydraulic Analysis of a Liquefied-Petroleum-Gas Revaporizer." Strojniški vestnik - Journal of Mechanical Engineering [Online], 49.6 (2003): 322-345. Web. 23 Dec. 2024
TY - JOUR AU - Bašič, Sanib AU - Škerget, Leopold AU - Hriberšek, Matjaž PY - 2003 TI - A Thermohydraulic Analysis of a Liquefied-Petroleum-Gas Revaporizer JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - heat transfer; vaporizers; thermohydraulic analysis; liquified petroleum gas; N2 - This paper deals with the thermohydraulic characteristics of an electrical liquefied-petroleum-gas (LPG) revaporizer. To begin with both the revaporizers description and its working performances are presented. The main goals of the analysis are defined and the quasi-axisymmetrical revaporizer section is introduced. The governing equations for Newtonian fluid flow in the region of the secondary liquid and for flow through a porous heater are presented. The boundary conditions on the computational region boundaries are prescribed. Further, basic empirical corelations for the evaluation of the transport phenomena within the individual revaporizer zones are presented. Special attention is devoted to the convective boiling process of the binary mixture in helically coiled tubes. The iterative calculating procedure with which we finally reached the working state of the device is explained. At the end the achieved results are discussed with comments and conclusions included. The operating point of the revaporizer was to lie inside the prescribed temperature range for the selected combination of process parameters. UR - https://www.sv-jme.eu/article/a-thermohydraulic-analysis-of-a-liquefied-petroleum-gas-revaporizer/
@article{{}{.},
author = {Bašič, S., Škerget, L., Hriberšek, M.},
title = {A Thermohydraulic Analysis of a Liquefied-Petroleum-Gas Revaporizer},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {49},
number = {6},
year = {2003},
doi = {},
url = {https://www.sv-jme.eu/article/a-thermohydraulic-analysis-of-a-liquefied-petroleum-gas-revaporizer/}
}
TY - JOUR AU - Bašič, Sanib AU - Škerget, Leopold AU - Hriberšek, Matjaž PY - 2017/07/07 TI - A Thermohydraulic Analysis of a Liquefied-Petroleum-Gas Revaporizer JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 49, No 6 (2003): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - heat transfer, vaporizers, thermohydraulic analysis, liquified petroleum gas, N2 - This paper deals with the thermohydraulic characteristics of an electrical liquefied-petroleum-gas (LPG) revaporizer. To begin with both the revaporizers description and its working performances are presented. The main goals of the analysis are defined and the quasi-axisymmetrical revaporizer section is introduced. The governing equations for Newtonian fluid flow in the region of the secondary liquid and for flow through a porous heater are presented. The boundary conditions on the computational region boundaries are prescribed. Further, basic empirical corelations for the evaluation of the transport phenomena within the individual revaporizer zones are presented. Special attention is devoted to the convective boiling process of the binary mixture in helically coiled tubes. The iterative calculating procedure with which we finally reached the working state of the device is explained. At the end the achieved results are discussed with comments and conclusions included. The operating point of the revaporizer was to lie inside the prescribed temperature range for the selected combination of process parameters. UR - https://www.sv-jme.eu/article/a-thermohydraulic-analysis-of-a-liquefied-petroleum-gas-revaporizer/
Bašič, Sanib, Škerget, Leopold, AND Hriberšek, Matjaž. "A Thermohydraulic Analysis of a Liquefied-Petroleum-Gas Revaporizer" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 49 Number 6 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 49(2003)6, 322-345
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper deals with the thermohydraulic characteristics of an electrical liquefied-petroleum-gas (LPG) revaporizer. To begin with both the revaporizers description and its working performances are presented. The main goals of the analysis are defined and the quasi-axisymmetrical revaporizer section is introduced. The governing equations for Newtonian fluid flow in the region of the secondary liquid and for flow through a porous heater are presented. The boundary conditions on the computational region boundaries are prescribed. Further, basic empirical corelations for the evaluation of the transport phenomena within the individual revaporizer zones are presented. Special attention is devoted to the convective boiling process of the binary mixture in helically coiled tubes. The iterative calculating procedure with which we finally reached the working state of the device is explained. At the end the achieved results are discussed with comments and conclusions included. The operating point of the revaporizer was to lie inside the prescribed temperature range for the selected combination of process parameters.