UYSAL, Cuneyt ;ARSLAN, Kamil ;KURT, Huseyin . A Numerical Analysis of Fluid Flow and Heat Transfer Characteristics of ZnO-Ethylene Glycol Nanofluid in Rectangular Microchannels. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 62, n.10, p. 603-613, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/a-numerical-analysis-of-fluid-flow-and-heat-transfer-characteristics-of-zno-ethylene-glycol-nanofluid-in-rectangular-microchannels/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2015.3170.
Uysal, C., Arslan, K., & Kurt, H. (2016). A Numerical Analysis of Fluid Flow and Heat Transfer Characteristics of ZnO-Ethylene Glycol Nanofluid in Rectangular Microchannels. Strojniški vestnik - Journal of Mechanical Engineering, 62(10), 603-613. doi:http://dx.doi.org/10.5545/sv-jme.2015.3170
@article{sv-jmesv-jme.2015.3170, author = {Cuneyt Uysal and Kamil Arslan and Huseyin Kurt}, title = {A Numerical Analysis of Fluid Flow and Heat Transfer Characteristics of ZnO-Ethylene Glycol Nanofluid in Rectangular Microchannels}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {62}, number = {10}, year = {2016}, keywords = {convection heat transfer; pressure drop; rectangular microchannel; ZnO-EG nanofluid}, abstract = {The fluid flow and heat transfer characteristics of ZnO-Ethylene glycol (EG) nanofluid through rectangular microchannels having different aspect ratios (α is 1 to 2) are numerically investigated. The different nanoparticle volume percentages (φ is 1 % to 4 %) of ZnO-EG nanofluid are used. The flow is considered under single-phase, three-dimensional, steady-state, incompressible, thermally developing, laminar flow conditions. As a result, the microchannel with an aspect ratio value of 1 has the highest convection heat transfer coefficient and the lowest pressure drop. It is also observed that the convection heat transfer coefficient and pressure drop increases with an increase in nanoparticle volume fraction value of nanofluid. However, the Nusselt number decreases with increasing nanoparticle volume fraction, while the Darcy friction factor is not affected.}, issn = {0039-2480}, pages = {603-613}, doi = {10.5545/sv-jme.2015.3170}, url = {https://www.sv-jme.eu/article/a-numerical-analysis-of-fluid-flow-and-heat-transfer-characteristics-of-zno-ethylene-glycol-nanofluid-in-rectangular-microchannels/} }
Uysal, C.,Arslan, K.,Kurt, H. 2016 June 62. A Numerical Analysis of Fluid Flow and Heat Transfer Characteristics of ZnO-Ethylene Glycol Nanofluid in Rectangular Microchannels. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 62:10
%A Uysal, Cuneyt %A Arslan, Kamil %A Kurt, Huseyin %D 2016 %T A Numerical Analysis of Fluid Flow and Heat Transfer Characteristics of ZnO-Ethylene Glycol Nanofluid in Rectangular Microchannels %B 2016 %9 convection heat transfer; pressure drop; rectangular microchannel; ZnO-EG nanofluid %! A Numerical Analysis of Fluid Flow and Heat Transfer Characteristics of ZnO-Ethylene Glycol Nanofluid in Rectangular Microchannels %K convection heat transfer; pressure drop; rectangular microchannel; ZnO-EG nanofluid %X The fluid flow and heat transfer characteristics of ZnO-Ethylene glycol (EG) nanofluid through rectangular microchannels having different aspect ratios (α is 1 to 2) are numerically investigated. The different nanoparticle volume percentages (φ is 1 % to 4 %) of ZnO-EG nanofluid are used. The flow is considered under single-phase, three-dimensional, steady-state, incompressible, thermally developing, laminar flow conditions. As a result, the microchannel with an aspect ratio value of 1 has the highest convection heat transfer coefficient and the lowest pressure drop. It is also observed that the convection heat transfer coefficient and pressure drop increases with an increase in nanoparticle volume fraction value of nanofluid. However, the Nusselt number decreases with increasing nanoparticle volume fraction, while the Darcy friction factor is not affected. %U https://www.sv-jme.eu/article/a-numerical-analysis-of-fluid-flow-and-heat-transfer-characteristics-of-zno-ethylene-glycol-nanofluid-in-rectangular-microchannels/ %0 Journal Article %R 10.5545/sv-jme.2015.3170 %& 603 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 62 %N 10 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Uysal, Cuneyt, Kamil Arslan, & Huseyin Kurt. "A Numerical Analysis of Fluid Flow and Heat Transfer Characteristics of ZnO-Ethylene Glycol Nanofluid in Rectangular Microchannels." Strojniški vestnik - Journal of Mechanical Engineering [Online], 62.10 (2016): 603-613. Web. 01 Sep. 2024
TY - JOUR AU - Uysal, Cuneyt AU - Arslan, Kamil AU - Kurt, Huseyin PY - 2016 TI - A Numerical Analysis of Fluid Flow and Heat Transfer Characteristics of ZnO-Ethylene Glycol Nanofluid in Rectangular Microchannels JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.3170 KW - convection heat transfer; pressure drop; rectangular microchannel; ZnO-EG nanofluid N2 - The fluid flow and heat transfer characteristics of ZnO-Ethylene glycol (EG) nanofluid through rectangular microchannels having different aspect ratios (α is 1 to 2) are numerically investigated. The different nanoparticle volume percentages (φ is 1 % to 4 %) of ZnO-EG nanofluid are used. The flow is considered under single-phase, three-dimensional, steady-state, incompressible, thermally developing, laminar flow conditions. As a result, the microchannel with an aspect ratio value of 1 has the highest convection heat transfer coefficient and the lowest pressure drop. It is also observed that the convection heat transfer coefficient and pressure drop increases with an increase in nanoparticle volume fraction value of nanofluid. However, the Nusselt number decreases with increasing nanoparticle volume fraction, while the Darcy friction factor is not affected. UR - https://www.sv-jme.eu/article/a-numerical-analysis-of-fluid-flow-and-heat-transfer-characteristics-of-zno-ethylene-glycol-nanofluid-in-rectangular-microchannels/
@article{{sv-jme}{sv-jme.2015.3170}, author = {Uysal, C., Arslan, K., Kurt, H.}, title = {A Numerical Analysis of Fluid Flow and Heat Transfer Characteristics of ZnO-Ethylene Glycol Nanofluid in Rectangular Microchannels}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {62}, number = {10}, year = {2016}, doi = {10.5545/sv-jme.2015.3170}, url = {https://www.sv-jme.eu/article/a-numerical-analysis-of-fluid-flow-and-heat-transfer-characteristics-of-zno-ethylene-glycol-nanofluid-in-rectangular-microchannels/} }
TY - JOUR AU - Uysal, Cuneyt AU - Arslan, Kamil AU - Kurt, Huseyin PY - 2018/06/27 TI - A Numerical Analysis of Fluid Flow and Heat Transfer Characteristics of ZnO-Ethylene Glycol Nanofluid in Rectangular Microchannels JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 62, No 10 (2016): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.3170 KW - convection heat transfer, pressure drop, rectangular microchannel, ZnO-EG nanofluid N2 - The fluid flow and heat transfer characteristics of ZnO-Ethylene glycol (EG) nanofluid through rectangular microchannels having different aspect ratios (α is 1 to 2) are numerically investigated. The different nanoparticle volume percentages (φ is 1 % to 4 %) of ZnO-EG nanofluid are used. The flow is considered under single-phase, three-dimensional, steady-state, incompressible, thermally developing, laminar flow conditions. As a result, the microchannel with an aspect ratio value of 1 has the highest convection heat transfer coefficient and the lowest pressure drop. It is also observed that the convection heat transfer coefficient and pressure drop increases with an increase in nanoparticle volume fraction value of nanofluid. However, the Nusselt number decreases with increasing nanoparticle volume fraction, while the Darcy friction factor is not affected. UR - https://www.sv-jme.eu/article/a-numerical-analysis-of-fluid-flow-and-heat-transfer-characteristics-of-zno-ethylene-glycol-nanofluid-in-rectangular-microchannels/
Uysal, Cuneyt, Arslan, Kamil, AND Kurt, Huseyin. "A Numerical Analysis of Fluid Flow and Heat Transfer Characteristics of ZnO-Ethylene Glycol Nanofluid in Rectangular Microchannels" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 62 Number 10 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 62(2016)10, 603-613
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The fluid flow and heat transfer characteristics of ZnO-Ethylene glycol (EG) nanofluid through rectangular microchannels having different aspect ratios (α is 1 to 2) are numerically investigated. The different nanoparticle volume percentages (φ is 1 % to 4 %) of ZnO-EG nanofluid are used. The flow is considered under single-phase, three-dimensional, steady-state, incompressible, thermally developing, laminar flow conditions. As a result, the microchannel with an aspect ratio value of 1 has the highest convection heat transfer coefficient and the lowest pressure drop. It is also observed that the convection heat transfer coefficient and pressure drop increases with an increase in nanoparticle volume fraction value of nanofluid. However, the Nusselt number decreases with increasing nanoparticle volume fraction, while the Darcy friction factor is not affected.