GOLOB, Borut ;JEZERNIK, Anton . A Feature-Based Approach to Conceptual Design Process. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 49, n.5, p. 275-286, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/a-feature-based-approach-to-conceptual-design-process/>. Date accessed: 31 aug. 2024. doi:http://dx.doi.org/.
Golob, B., & Jezernik, A. (2003). A Feature-Based Approach to Conceptual Design Process. Strojniški vestnik - Journal of Mechanical Engineering, 49(5), 275-286. doi:http://dx.doi.org/
@article{., author = {Borut Golob and Anton Jezernik}, title = {A Feature-Based Approach to Conceptual Design Process}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {49}, number = {5}, year = {2003}, keywords = {CAD; features; conceptual design; sistematic design; }, abstract = {Product design is an iterative, complex and decision-making process, performed by designers. It usually starts with recognising and specifying requirements and demands, followed by searching for an optimum solution for the required tasks. After an evaluation of the concept solutions and the selection of promising solutions comes detailing, with the layout definition, and a description of the product. Conceptual design has been recognised as an important part of the design process, but receives weak computer support due to complex and informal data that is hard to retrieve, store and maintain with computers. Besides geometrical data, it is important to capture, represent and process the function and the behaviour of a product. The presented approach is feature-based modelling of product semantics and function that takes place already in the conceptual design phase. The features are then the information carriers that allow modelling of the relationships between the requirements of a product, its functional descriptions and physical solutions. These features will also bring this information to the downstream applications.}, issn = {0039-2480}, pages = {275-286}, doi = {}, url = {https://www.sv-jme.eu/article/a-feature-based-approach-to-conceptual-design-process/} }
Golob, B.,Jezernik, A. 2003 July 49. A Feature-Based Approach to Conceptual Design Process. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 49:5
%A Golob, Borut %A Jezernik, Anton %D 2003 %T A Feature-Based Approach to Conceptual Design Process %B 2003 %9 CAD; features; conceptual design; sistematic design; %! A Feature-Based Approach to Conceptual Design Process %K CAD; features; conceptual design; sistematic design; %X Product design is an iterative, complex and decision-making process, performed by designers. It usually starts with recognising and specifying requirements and demands, followed by searching for an optimum solution for the required tasks. After an evaluation of the concept solutions and the selection of promising solutions comes detailing, with the layout definition, and a description of the product. Conceptual design has been recognised as an important part of the design process, but receives weak computer support due to complex and informal data that is hard to retrieve, store and maintain with computers. Besides geometrical data, it is important to capture, represent and process the function and the behaviour of a product. The presented approach is feature-based modelling of product semantics and function that takes place already in the conceptual design phase. The features are then the information carriers that allow modelling of the relationships between the requirements of a product, its functional descriptions and physical solutions. These features will also bring this information to the downstream applications. %U https://www.sv-jme.eu/article/a-feature-based-approach-to-conceptual-design-process/ %0 Journal Article %R %& 275 %P 12 %J Strojniški vestnik - Journal of Mechanical Engineering %V 49 %N 5 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Golob, Borut, & Anton Jezernik. "A Feature-Based Approach to Conceptual Design Process." Strojniški vestnik - Journal of Mechanical Engineering [Online], 49.5 (2003): 275-286. Web. 31 Aug. 2024
TY - JOUR AU - Golob, Borut AU - Jezernik, Anton PY - 2003 TI - A Feature-Based Approach to Conceptual Design Process JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - CAD; features; conceptual design; sistematic design; N2 - Product design is an iterative, complex and decision-making process, performed by designers. It usually starts with recognising and specifying requirements and demands, followed by searching for an optimum solution for the required tasks. After an evaluation of the concept solutions and the selection of promising solutions comes detailing, with the layout definition, and a description of the product. Conceptual design has been recognised as an important part of the design process, but receives weak computer support due to complex and informal data that is hard to retrieve, store and maintain with computers. Besides geometrical data, it is important to capture, represent and process the function and the behaviour of a product. The presented approach is feature-based modelling of product semantics and function that takes place already in the conceptual design phase. The features are then the information carriers that allow modelling of the relationships between the requirements of a product, its functional descriptions and physical solutions. These features will also bring this information to the downstream applications. UR - https://www.sv-jme.eu/article/a-feature-based-approach-to-conceptual-design-process/
@article{{}{.}, author = {Golob, B., Jezernik, A.}, title = {A Feature-Based Approach to Conceptual Design Process}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {49}, number = {5}, year = {2003}, doi = {}, url = {https://www.sv-jme.eu/article/a-feature-based-approach-to-conceptual-design-process/} }
TY - JOUR AU - Golob, Borut AU - Jezernik, Anton PY - 2017/07/07 TI - A Feature-Based Approach to Conceptual Design Process JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 49, No 5 (2003): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - CAD, features, conceptual design, sistematic design, N2 - Product design is an iterative, complex and decision-making process, performed by designers. It usually starts with recognising and specifying requirements and demands, followed by searching for an optimum solution for the required tasks. After an evaluation of the concept solutions and the selection of promising solutions comes detailing, with the layout definition, and a description of the product. Conceptual design has been recognised as an important part of the design process, but receives weak computer support due to complex and informal data that is hard to retrieve, store and maintain with computers. Besides geometrical data, it is important to capture, represent and process the function and the behaviour of a product. The presented approach is feature-based modelling of product semantics and function that takes place already in the conceptual design phase. The features are then the information carriers that allow modelling of the relationships between the requirements of a product, its functional descriptions and physical solutions. These features will also bring this information to the downstream applications. UR - https://www.sv-jme.eu/article/a-feature-based-approach-to-conceptual-design-process/
Golob, Borut, AND Jezernik, Anton. "A Feature-Based Approach to Conceptual Design Process" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 49 Number 5 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 49(2003)5, 275-286
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Product design is an iterative, complex and decision-making process, performed by designers. It usually starts with recognising and specifying requirements and demands, followed by searching for an optimum solution for the required tasks. After an evaluation of the concept solutions and the selection of promising solutions comes detailing, with the layout definition, and a description of the product. Conceptual design has been recognised as an important part of the design process, but receives weak computer support due to complex and informal data that is hard to retrieve, store and maintain with computers. Besides geometrical data, it is important to capture, represent and process the function and the behaviour of a product. The presented approach is feature-based modelling of product semantics and function that takes place already in the conceptual design phase. The features are then the information carriers that allow modelling of the relationships between the requirements of a product, its functional descriptions and physical solutions. These features will also bring this information to the downstream applications.