DOAN, Tat-Khoa ;NGUYEN, Trung-Thanh ;VAN, An-Le . Multi-performance Optimization of the Rotary Turning Operation for Environmental and Quality Indicators. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 70, n.1-2, p. 42-54, october 2023. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/multi-performance-optimization-of-the-rotary-turning-operation-for-environmental-and-quality-indicators/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2023.692.
Doan, T., Nguyen, T., & Van, A. (2024). Multi-performance Optimization of the Rotary Turning Operation for Environmental and Quality Indicators. Strojniški vestnik - Journal of Mechanical Engineering, 70(1-2), 42-54. doi:http://dx.doi.org/10.5545/sv-jme.2023.692
@article{sv-jmesv-jme.2023.692,
author = {Tat-Khoa Doan and Trung-Thanh Nguyen and An-Le Van},
title = {Multi-performance Optimization of the Rotary Turning Operation for Environmental and Quality Indicators},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {70},
number = {1-2},
year = {2024},
keywords = {Rotary turning; total energy consumption; surface roughness; noise emission; IQPSO; },
abstract = {In this investigation, two environmental metrics (the comprehensive energy used (TU) and turning noise (TN)) and a quality metric (surface roughness (SR)) of the rotary turning process for the Ti6Al4V were optimized and reduced using the optimal factors (the inclined angle-i, depth of cut-d, feed-f, and turning speed-V). The TU model was proposed comprising the embodied energy of the insert and lubricant. The method based on the removal effects of criteria (MEREC), an improved quantum-behaved particle swarm optimization algorithm (IQPSO), and TOPSIS were applied to select weight values and the best optimal solution. The machining cost (MC) was proposed in terms of process parameters. The outcomes presented that the optimal values of the i, d, f, and V were 35 deg., 0.30 mm, 0.40 mm/rev., and 190 m/min, respectively, while the TU, SR, TN, and MC were saved by 6.7 %, 22.3 %, 23.5 %, and 8.5 %, respectively. The turning responses were primarily affected by the feed rate and turning speed, respectively. The developed turning process could be employed for machining hard-to-cut alloys. The developed approach could be applied to deal with optimization problems for other machining operations.},
issn = {0039-2480}, pages = {42-54}, doi = {10.5545/sv-jme.2023.692},
url = {https://www.sv-jme.eu/article/multi-performance-optimization-of-the-rotary-turning-operation-for-environmental-and-quality-indicators/}
}
Doan, T.,Nguyen, T.,Van, A. 2024 October 70. Multi-performance Optimization of the Rotary Turning Operation for Environmental and Quality Indicators. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 70:1-2
%A Doan, Tat-Khoa %A Nguyen, Trung-Thanh %A Van, An-Le %D 2024 %T Multi-performance Optimization of the Rotary Turning Operation for Environmental and Quality Indicators %B 2024 %9 Rotary turning; total energy consumption; surface roughness; noise emission; IQPSO; %! Multi-performance Optimization of the Rotary Turning Operation for Environmental and Quality Indicators %K Rotary turning; total energy consumption; surface roughness; noise emission; IQPSO; %X In this investigation, two environmental metrics (the comprehensive energy used (TU) and turning noise (TN)) and a quality metric (surface roughness (SR)) of the rotary turning process for the Ti6Al4V were optimized and reduced using the optimal factors (the inclined angle-i, depth of cut-d, feed-f, and turning speed-V). The TU model was proposed comprising the embodied energy of the insert and lubricant. The method based on the removal effects of criteria (MEREC), an improved quantum-behaved particle swarm optimization algorithm (IQPSO), and TOPSIS were applied to select weight values and the best optimal solution. The machining cost (MC) was proposed in terms of process parameters. The outcomes presented that the optimal values of the i, d, f, and V were 35 deg., 0.30 mm, 0.40 mm/rev., and 190 m/min, respectively, while the TU, SR, TN, and MC were saved by 6.7 %, 22.3 %, 23.5 %, and 8.5 %, respectively. The turning responses were primarily affected by the feed rate and turning speed, respectively. The developed turning process could be employed for machining hard-to-cut alloys. The developed approach could be applied to deal with optimization problems for other machining operations. %U https://www.sv-jme.eu/article/multi-performance-optimization-of-the-rotary-turning-operation-for-environmental-and-quality-indicators/ %0 Journal Article %R 10.5545/sv-jme.2023.692 %& 42 %P 13 %J Strojniški vestnik - Journal of Mechanical Engineering %V 70 %N 1-2 %@ 0039-2480 %8 2023-10-02 %7 2023-10-02
Doan, Tat-Khoa, Trung-Thanh Nguyen, & An-Le Van. "Multi-performance Optimization of the Rotary Turning Operation for Environmental and Quality Indicators." Strojniški vestnik - Journal of Mechanical Engineering [Online], 70.1-2 (2024): 42-54. Web. 20 Dec. 2024
TY - JOUR AU - Doan, Tat-Khoa AU - Nguyen, Trung-Thanh AU - Van, An-Le PY - 2024 TI - Multi-performance Optimization of the Rotary Turning Operation for Environmental and Quality Indicators JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2023.692 KW - Rotary turning; total energy consumption; surface roughness; noise emission; IQPSO; N2 - In this investigation, two environmental metrics (the comprehensive energy used (TU) and turning noise (TN)) and a quality metric (surface roughness (SR)) of the rotary turning process for the Ti6Al4V were optimized and reduced using the optimal factors (the inclined angle-i, depth of cut-d, feed-f, and turning speed-V). The TU model was proposed comprising the embodied energy of the insert and lubricant. The method based on the removal effects of criteria (MEREC), an improved quantum-behaved particle swarm optimization algorithm (IQPSO), and TOPSIS were applied to select weight values and the best optimal solution. The machining cost (MC) was proposed in terms of process parameters. The outcomes presented that the optimal values of the i, d, f, and V were 35 deg., 0.30 mm, 0.40 mm/rev., and 190 m/min, respectively, while the TU, SR, TN, and MC were saved by 6.7 %, 22.3 %, 23.5 %, and 8.5 %, respectively. The turning responses were primarily affected by the feed rate and turning speed, respectively. The developed turning process could be employed for machining hard-to-cut alloys. The developed approach could be applied to deal with optimization problems for other machining operations. UR - https://www.sv-jme.eu/article/multi-performance-optimization-of-the-rotary-turning-operation-for-environmental-and-quality-indicators/
@article{{sv-jme}{sv-jme.2023.692},
author = {Doan, T., Nguyen, T., Van, A.},
title = {Multi-performance Optimization of the Rotary Turning Operation for Environmental and Quality Indicators},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {70},
number = {1-2},
year = {2024},
doi = {10.5545/sv-jme.2023.692},
url = {https://www.sv-jme.eu/article/multi-performance-optimization-of-the-rotary-turning-operation-for-environmental-and-quality-indicators/}
}
TY - JOUR AU - Doan, Tat-Khoa AU - Nguyen, Trung-Thanh AU - Van, An-Le PY - 2023/10/02 TI - Multi-performance Optimization of the Rotary Turning Operation for Environmental and Quality Indicators JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 70, No 1-2 (2024): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2023.692 KW - Rotary turning, total energy consumption, surface roughness, noise emission, IQPSO, N2 - In this investigation, two environmental metrics (the comprehensive energy used (TU) and turning noise (TN)) and a quality metric (surface roughness (SR)) of the rotary turning process for the Ti6Al4V were optimized and reduced using the optimal factors (the inclined angle-i, depth of cut-d, feed-f, and turning speed-V). The TU model was proposed comprising the embodied energy of the insert and lubricant. The method based on the removal effects of criteria (MEREC), an improved quantum-behaved particle swarm optimization algorithm (IQPSO), and TOPSIS were applied to select weight values and the best optimal solution. The machining cost (MC) was proposed in terms of process parameters. The outcomes presented that the optimal values of the i, d, f, and V were 35 deg., 0.30 mm, 0.40 mm/rev., and 190 m/min, respectively, while the TU, SR, TN, and MC were saved by 6.7 %, 22.3 %, 23.5 %, and 8.5 %, respectively. The turning responses were primarily affected by the feed rate and turning speed, respectively. The developed turning process could be employed for machining hard-to-cut alloys. The developed approach could be applied to deal with optimization problems for other machining operations. UR - https://www.sv-jme.eu/article/multi-performance-optimization-of-the-rotary-turning-operation-for-environmental-and-quality-indicators/
Doan, Tat-Khoa, Nguyen, Trung-Thanh, AND Van, An-Le. "Multi-performance Optimization of the Rotary Turning Operation for Environmental and Quality Indicators" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 70 Number 1-2 (02 October 2023)
Strojniški vestnik - Journal of Mechanical Engineering 70(2024)1-2, 42-54
© The Authors 2024. CC BY 4.0 Int.
In this investigation, two environmental metrics (the comprehensive energy used (TU) and turning noise (TN)) and a quality metric (surface roughness (SR)) of the rotary turning process for the Ti6Al4V were optimized and reduced using the optimal factors (the inclined angle-i, depth of cut-d, feed-f, and turning speed-V). The TU model was proposed comprising the embodied energy of the insert and lubricant. The method based on the removal effects of criteria (MEREC), an improved quantum-behaved particle swarm optimization algorithm (IQPSO), and TOPSIS were applied to select weight values and the best optimal solution. The machining cost (MC) was proposed in terms of process parameters. The outcomes presented that the optimal values of the i, d, f, and V were 35 deg., 0.30 mm, 0.40 mm/rev., and 190 m/min, respectively, while the TU, SR, TN, and MC were saved by 6.7 %, 22.3 %, 23.5 %, and 8.5 %, respectively. The turning responses were primarily affected by the feed rate and turning speed, respectively. The developed turning process could be employed for machining hard-to-cut alloys. The developed approach could be applied to deal with optimization problems for other machining operations.