ELANGANDHI, Jamuna ;PERIYAGOUNDER, Suresh ;SELAVARAJ, Mahalingam ;SAMINATHARAJA, Duraisivam . Mechanical and Microstructural Properties of B4C/W Reinforced Copper Matrix Composite Using a Friction Stir-Welding Process. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 69, n.9-10, p. 388-400, may 2023. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/investigations-on-mechanical-and-microstructural-properties-of-b4cw-reinforced-copper-composite-using-friction-stir-welding-process/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2023.518.
Elangandhi, J., Periyagounder, S., Selavaraj, M., & Saminatharaja, D. (2023). Mechanical and Microstructural Properties of B4C/W Reinforced Copper Matrix Composite Using a Friction Stir-Welding Process. Strojniški vestnik - Journal of Mechanical Engineering, 69(9-10), 388-400. doi:http://dx.doi.org/10.5545/sv-jme.2023.518
@article{sv-jmesv-jme.2023.518,
author = {Jamuna Elangandhi and Suresh Periyagounder and Mahalingam Selavaraj and Duraisivam Saminatharaja},
title = {Mechanical and Microstructural Properties of B4C/W Reinforced Copper Matrix Composite Using a Friction Stir-Welding Process},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {69},
number = {9-10},
year = {2023},
keywords = {friction stir welding; copper; metal matrix composite; boron carbide; },
abstract = {Copper metal matrix composites (CMC) are broadly employed in various applications in the fields of space, aviation, automobile and electronics industries. The welding of CMC in using conventional methods is very difficult and expensive due to its crystallographic nature. Friction stir welding (FSW) is a more prominent and reliable technique for welding than conventional methods. Therefore, this work is based on work with CMC material, which is prepared with a stir-casting technique. Pure copper (Cu) is reinforced with tungsten (W) and boron carbide (B4C) particles in different combinations and welded using the FSW process to study the mechanical and micro-structural properties. Multi-objective decision-making methods, such as the technique for order preference by similarity to ideal solution (TOPSIS) and grey relational analysis (GRA) are used to find optimal parameter combination. The experiments are planned according to the L 18 orthogonal array (OA) using the most influential parameters, such as reinforcement the percentage of B4C, tool rotational speed, welding speed, and axial force. The performance of outcomes is measured based on the responses such as tensile strength, hardness, and impact strength of the weld joint. Based on the results 15 % of B4C reinforcement, 900 RPM rotational speed, 15 mm/min welding speed and 6 kN axial forces are optimal for better mechanical strength in the welding with TOPSIS and GRA techniques. Additionally, scanning electron microscopic image (SEM) analyses were carried out for better understanding of weldments’ microstructure changes. },
issn = {0039-2480}, pages = {388-400}, doi = {10.5545/sv-jme.2023.518},
url = {https://www.sv-jme.eu/article/investigations-on-mechanical-and-microstructural-properties-of-b4cw-reinforced-copper-composite-using-friction-stir-welding-process/}
}
Elangandhi, J.,Periyagounder, S.,Selavaraj, M.,Saminatharaja, D. 2023 May 69. Mechanical and Microstructural Properties of B4C/W Reinforced Copper Matrix Composite Using a Friction Stir-Welding Process. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 69:9-10
%A Elangandhi, Jamuna %A Periyagounder, Suresh %A Selavaraj, Mahalingam %A Saminatharaja, Duraisivam %D 2023 %T Mechanical and Microstructural Properties of B4C/W Reinforced Copper Matrix Composite Using a Friction Stir-Welding Process %B 2023 %9 friction stir welding; copper; metal matrix composite; boron carbide; %! Mechanical and Microstructural Properties of B4C/W Reinforced Copper Matrix Composite Using a Friction Stir-Welding Process %K friction stir welding; copper; metal matrix composite; boron carbide; %X Copper metal matrix composites (CMC) are broadly employed in various applications in the fields of space, aviation, automobile and electronics industries. The welding of CMC in using conventional methods is very difficult and expensive due to its crystallographic nature. Friction stir welding (FSW) is a more prominent and reliable technique for welding than conventional methods. Therefore, this work is based on work with CMC material, which is prepared with a stir-casting technique. Pure copper (Cu) is reinforced with tungsten (W) and boron carbide (B4C) particles in different combinations and welded using the FSW process to study the mechanical and micro-structural properties. Multi-objective decision-making methods, such as the technique for order preference by similarity to ideal solution (TOPSIS) and grey relational analysis (GRA) are used to find optimal parameter combination. The experiments are planned according to the L 18 orthogonal array (OA) using the most influential parameters, such as reinforcement the percentage of B4C, tool rotational speed, welding speed, and axial force. The performance of outcomes is measured based on the responses such as tensile strength, hardness, and impact strength of the weld joint. Based on the results 15 % of B4C reinforcement, 900 RPM rotational speed, 15 mm/min welding speed and 6 kN axial forces are optimal for better mechanical strength in the welding with TOPSIS and GRA techniques. Additionally, scanning electron microscopic image (SEM) analyses were carried out for better understanding of weldments’ microstructure changes. %U https://www.sv-jme.eu/article/investigations-on-mechanical-and-microstructural-properties-of-b4cw-reinforced-copper-composite-using-friction-stir-welding-process/ %0 Journal Article %R 10.5545/sv-jme.2023.518 %& 388 %P 13 %J Strojniški vestnik - Journal of Mechanical Engineering %V 69 %N 9-10 %@ 0039-2480 %8 2023-05-16 %7 2023-05-16
Elangandhi, Jamuna, Suresh Periyagounder, Mahalingam Selavaraj, & Duraisivam Saminatharaja. "Mechanical and Microstructural Properties of B4C/W Reinforced Copper Matrix Composite Using a Friction Stir-Welding Process." Strojniški vestnik - Journal of Mechanical Engineering [Online], 69.9-10 (2023): 388-400. Web. 20 Dec. 2024
TY - JOUR AU - Elangandhi, Jamuna AU - Periyagounder, Suresh AU - Selavaraj, Mahalingam AU - Saminatharaja, Duraisivam PY - 2023 TI - Mechanical and Microstructural Properties of B4C/W Reinforced Copper Matrix Composite Using a Friction Stir-Welding Process JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2023.518 KW - friction stir welding; copper; metal matrix composite; boron carbide; N2 - Copper metal matrix composites (CMC) are broadly employed in various applications in the fields of space, aviation, automobile and electronics industries. The welding of CMC in using conventional methods is very difficult and expensive due to its crystallographic nature. Friction stir welding (FSW) is a more prominent and reliable technique for welding than conventional methods. Therefore, this work is based on work with CMC material, which is prepared with a stir-casting technique. Pure copper (Cu) is reinforced with tungsten (W) and boron carbide (B4C) particles in different combinations and welded using the FSW process to study the mechanical and micro-structural properties. Multi-objective decision-making methods, such as the technique for order preference by similarity to ideal solution (TOPSIS) and grey relational analysis (GRA) are used to find optimal parameter combination. The experiments are planned according to the L 18 orthogonal array (OA) using the most influential parameters, such as reinforcement the percentage of B4C, tool rotational speed, welding speed, and axial force. The performance of outcomes is measured based on the responses such as tensile strength, hardness, and impact strength of the weld joint. Based on the results 15 % of B4C reinforcement, 900 RPM rotational speed, 15 mm/min welding speed and 6 kN axial forces are optimal for better mechanical strength in the welding with TOPSIS and GRA techniques. Additionally, scanning electron microscopic image (SEM) analyses were carried out for better understanding of weldments’ microstructure changes. UR - https://www.sv-jme.eu/article/investigations-on-mechanical-and-microstructural-properties-of-b4cw-reinforced-copper-composite-using-friction-stir-welding-process/
@article{{sv-jme}{sv-jme.2023.518},
author = {Elangandhi, J., Periyagounder, S., Selavaraj, M., Saminatharaja, D.},
title = {Mechanical and Microstructural Properties of B4C/W Reinforced Copper Matrix Composite Using a Friction Stir-Welding Process},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {69},
number = {9-10},
year = {2023},
doi = {10.5545/sv-jme.2023.518},
url = {https://www.sv-jme.eu/article/investigations-on-mechanical-and-microstructural-properties-of-b4cw-reinforced-copper-composite-using-friction-stir-welding-process/}
}
TY - JOUR AU - Elangandhi, Jamuna AU - Periyagounder, Suresh AU - Selavaraj, Mahalingam AU - Saminatharaja, Duraisivam PY - 2023/05/16 TI - Mechanical and Microstructural Properties of B4C/W Reinforced Copper Matrix Composite Using a Friction Stir-Welding Process JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 69, No 9-10 (2023): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2023.518 KW - friction stir welding, copper, metal matrix composite, boron carbide, N2 - Copper metal matrix composites (CMC) are broadly employed in various applications in the fields of space, aviation, automobile and electronics industries. The welding of CMC in using conventional methods is very difficult and expensive due to its crystallographic nature. Friction stir welding (FSW) is a more prominent and reliable technique for welding than conventional methods. Therefore, this work is based on work with CMC material, which is prepared with a stir-casting technique. Pure copper (Cu) is reinforced with tungsten (W) and boron carbide (B4C) particles in different combinations and welded using the FSW process to study the mechanical and micro-structural properties. Multi-objective decision-making methods, such as the technique for order preference by similarity to ideal solution (TOPSIS) and grey relational analysis (GRA) are used to find optimal parameter combination. The experiments are planned according to the L 18 orthogonal array (OA) using the most influential parameters, such as reinforcement the percentage of B4C, tool rotational speed, welding speed, and axial force. The performance of outcomes is measured based on the responses such as tensile strength, hardness, and impact strength of the weld joint. Based on the results 15 % of B4C reinforcement, 900 RPM rotational speed, 15 mm/min welding speed and 6 kN axial forces are optimal for better mechanical strength in the welding with TOPSIS and GRA techniques. Additionally, scanning electron microscopic image (SEM) analyses were carried out for better understanding of weldments’ microstructure changes. UR - https://www.sv-jme.eu/article/investigations-on-mechanical-and-microstructural-properties-of-b4cw-reinforced-copper-composite-using-friction-stir-welding-process/
Elangandhi, Jamuna, Periyagounder, Suresh, Selavaraj, Mahalingam, AND Saminatharaja, Duraisivam. "Mechanical and Microstructural Properties of B4C/W Reinforced Copper Matrix Composite Using a Friction Stir-Welding Process" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 69 Number 9-10 (16 May 2023)
Strojniški vestnik - Journal of Mechanical Engineering 69(2023)9-10, 388-400
© The Authors 2023. CC BY 4.0 Int.
Copper metal matrix composites (CMC) are broadly employed in various applications in the fields of space, aviation, automobile and electronics industries. The welding of CMC in using conventional methods is very difficult and expensive due to its crystallographic nature. Friction stir welding (FSW) is a more prominent and reliable technique for welding than conventional methods. Therefore, this work is based on work with CMC material, which is prepared with a stir-casting technique. Pure copper (Cu) is reinforced with tungsten (W) and boron carbide (B4C) particles in different combinations and welded using the FSW process to study the mechanical and micro-structural properties. Multi-objective decision-making methods, such as the technique for order preference by similarity to ideal solution (TOPSIS) and grey relational analysis (GRA) are used to find optimal parameter combination. The experiments are planned according to the L 18 orthogonal array (OA) using the most influential parameters, such as reinforcement the percentage of B4C, tool rotational speed, welding speed, and axial force. The performance of outcomes is measured based on the responses such as tensile strength, hardness, and impact strength of the weld joint. Based on the results 15 % of B4C reinforcement, 900 RPM rotational speed, 15 mm/min welding speed and 6 kN axial forces are optimal for better mechanical strength in the welding with TOPSIS and GRA techniques. Additionally, scanning electron microscopic image (SEM) analyses were carried out for better understanding of weldments’ microstructure changes.