ALLASI, Haiter Lenin ;SOOSAIMARIYAN, Mary Vasanthi ;CHIDAMBARANATHAN, Vettivel Singaravel . Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 69, n.5-6, p. 275-283, february 2023. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/wear-behavior-of-b4c-reinforced-with-cu-ni-sn-hybrid-composite-prepared-by-powder-metallurgy-technique/>. Date accessed: 22 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2022.423.
Allasi, H., Soosaimariyan, M., & Chidambaranathan, V. (2023). Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique. Strojniški vestnik - Journal of Mechanical Engineering, 69(5-6), 275-283. doi:http://dx.doi.org/10.5545/sv-jme.2022.423
@article{sv-jmesv-jme.2022.423,
author = {Haiter Lenin Allasi and Mary Vasanthi Soosaimariyan and Vettivel Singaravel Chidambaranathan},
title = {Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {69},
number = {5-6},
year = {2023},
keywords = {powder metallurgy; copper; wear; characterization; density; composites; },
abstract = {Cu matrix composites benefit from the high electrical and thermal conductivities of Cu and the mechanical wear/erosion resistance of hard reinforcement. In this study, an attempt has been made to determine the effect of the addition of reinforcement B4C in Cu-Ni-Sn. The B4C is reinforced to form a hybrid Cu matrix composite with powder metallurgy technique. The hybrid composites are obtained by milling, blending, and compacting the powders to obtain a fine grain-sized particle without aggregation. The grain size and particle nature were characterized using scanning electron microscope (SEM) and X-ray diffraction (XRD) techniques, respectively. The microstructure, density, hardness, and wear rate of the composites were studied. The pin-on-disc method is equipped to study the wear behaviour and coefficient of friction. The sintered density of the prepared Cu-15%Ni is 98.25 %, Cu-8%Sn is 98.20 %, Cu-15%Ni-8%Sn is 98.10 % and Cu-15%Ni-8%Sn-2%B4C is 95.26 % and lower specific wear rate has been recorded for Cu-15Ni-8Sn-2B4C 121×10-6 mm3/(Nm) and the addition of reinforcement B4C in Cu-Ni-Sn displays remarkable changes in wear rate and friction coefficient.},
issn = {0039-2480}, pages = {275-283}, doi = {10.5545/sv-jme.2022.423},
url = {https://www.sv-jme.eu/article/wear-behavior-of-b4c-reinforced-with-cu-ni-sn-hybrid-composite-prepared-by-powder-metallurgy-technique/}
}
Allasi, H.,Soosaimariyan, M.,Chidambaranathan, V. 2023 February 69. Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 69:5-6
%A Allasi, Haiter Lenin %A Soosaimariyan, Mary Vasanthi %A Chidambaranathan, Vettivel Singaravel %D 2023 %T Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique %B 2023 %9 powder metallurgy; copper; wear; characterization; density; composites; %! Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique %K powder metallurgy; copper; wear; characterization; density; composites; %X Cu matrix composites benefit from the high electrical and thermal conductivities of Cu and the mechanical wear/erosion resistance of hard reinforcement. In this study, an attempt has been made to determine the effect of the addition of reinforcement B4C in Cu-Ni-Sn. The B4C is reinforced to form a hybrid Cu matrix composite with powder metallurgy technique. The hybrid composites are obtained by milling, blending, and compacting the powders to obtain a fine grain-sized particle without aggregation. The grain size and particle nature were characterized using scanning electron microscope (SEM) and X-ray diffraction (XRD) techniques, respectively. The microstructure, density, hardness, and wear rate of the composites were studied. The pin-on-disc method is equipped to study the wear behaviour and coefficient of friction. The sintered density of the prepared Cu-15%Ni is 98.25 %, Cu-8%Sn is 98.20 %, Cu-15%Ni-8%Sn is 98.10 % and Cu-15%Ni-8%Sn-2%B4C is 95.26 % and lower specific wear rate has been recorded for Cu-15Ni-8Sn-2B4C 121×10-6 mm3/(Nm) and the addition of reinforcement B4C in Cu-Ni-Sn displays remarkable changes in wear rate and friction coefficient. %U https://www.sv-jme.eu/article/wear-behavior-of-b4c-reinforced-with-cu-ni-sn-hybrid-composite-prepared-by-powder-metallurgy-technique/ %0 Journal Article %R 10.5545/sv-jme.2022.423 %& 275 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 69 %N 5-6 %@ 0039-2480 %8 2023-02-28 %7 2023-02-28
Allasi, Haiter Lenin, Mary Vasanthi Soosaimariyan, & Vettivel Singaravel Chidambaranathan. "Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique." Strojniški vestnik - Journal of Mechanical Engineering [Online], 69.5-6 (2023): 275-283. Web. 22 Dec. 2024
TY - JOUR AU - Allasi, Haiter Lenin AU - Soosaimariyan, Mary Vasanthi AU - Chidambaranathan, Vettivel Singaravel PY - 2023 TI - Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.423 KW - powder metallurgy; copper; wear; characterization; density; composites; N2 - Cu matrix composites benefit from the high electrical and thermal conductivities of Cu and the mechanical wear/erosion resistance of hard reinforcement. In this study, an attempt has been made to determine the effect of the addition of reinforcement B4C in Cu-Ni-Sn. The B4C is reinforced to form a hybrid Cu matrix composite with powder metallurgy technique. The hybrid composites are obtained by milling, blending, and compacting the powders to obtain a fine grain-sized particle without aggregation. The grain size and particle nature were characterized using scanning electron microscope (SEM) and X-ray diffraction (XRD) techniques, respectively. The microstructure, density, hardness, and wear rate of the composites were studied. The pin-on-disc method is equipped to study the wear behaviour and coefficient of friction. The sintered density of the prepared Cu-15%Ni is 98.25 %, Cu-8%Sn is 98.20 %, Cu-15%Ni-8%Sn is 98.10 % and Cu-15%Ni-8%Sn-2%B4C is 95.26 % and lower specific wear rate has been recorded for Cu-15Ni-8Sn-2B4C 121×10-6 mm3/(Nm) and the addition of reinforcement B4C in Cu-Ni-Sn displays remarkable changes in wear rate and friction coefficient. UR - https://www.sv-jme.eu/article/wear-behavior-of-b4c-reinforced-with-cu-ni-sn-hybrid-composite-prepared-by-powder-metallurgy-technique/
@article{{sv-jme}{sv-jme.2022.423},
author = {Allasi, H., Soosaimariyan, M., Chidambaranathan, V.},
title = {Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {69},
number = {5-6},
year = {2023},
doi = {10.5545/sv-jme.2022.423},
url = {https://www.sv-jme.eu/article/wear-behavior-of-b4c-reinforced-with-cu-ni-sn-hybrid-composite-prepared-by-powder-metallurgy-technique/}
}
TY - JOUR AU - Allasi, Haiter Lenin AU - Soosaimariyan, Mary Vasanthi AU - Chidambaranathan, Vettivel Singaravel PY - 2023/02/28 TI - Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 69, No 5-6 (2023): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.423 KW - powder metallurgy, copper, wear, characterization, density, composites, N2 - Cu matrix composites benefit from the high electrical and thermal conductivities of Cu and the mechanical wear/erosion resistance of hard reinforcement. In this study, an attempt has been made to determine the effect of the addition of reinforcement B4C in Cu-Ni-Sn. The B4C is reinforced to form a hybrid Cu matrix composite with powder metallurgy technique. The hybrid composites are obtained by milling, blending, and compacting the powders to obtain a fine grain-sized particle without aggregation. The grain size and particle nature were characterized using scanning electron microscope (SEM) and X-ray diffraction (XRD) techniques, respectively. The microstructure, density, hardness, and wear rate of the composites were studied. The pin-on-disc method is equipped to study the wear behaviour and coefficient of friction. The sintered density of the prepared Cu-15%Ni is 98.25 %, Cu-8%Sn is 98.20 %, Cu-15%Ni-8%Sn is 98.10 % and Cu-15%Ni-8%Sn-2%B4C is 95.26 % and lower specific wear rate has been recorded for Cu-15Ni-8Sn-2B4C 121×10-6 mm3/(Nm) and the addition of reinforcement B4C in Cu-Ni-Sn displays remarkable changes in wear rate and friction coefficient. UR - https://www.sv-jme.eu/article/wear-behavior-of-b4c-reinforced-with-cu-ni-sn-hybrid-composite-prepared-by-powder-metallurgy-technique/
Allasi, Haiter Lenin, Soosaimariyan, Mary Vasanthi , AND Chidambaranathan, Vettivel Singaravel. "Wear Behaviour of a Cu-Ni-Sn Hybrid Composite Reinforced with B4C prepared by Powder Metallurgy Technique" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 69 Number 5-6 (28 February 2023)
Strojniški vestnik - Journal of Mechanical Engineering 69(2023)5-6, 275-283
© The Authors 2023. CC BY 4.0 Int.
Cu matrix composites benefit from the high electrical and thermal conductivities of Cu and the mechanical wear/erosion resistance of hard reinforcement. In this study, an attempt has been made to determine the effect of the addition of reinforcement B4C in Cu-Ni-Sn. The B4C is reinforced to form a hybrid Cu matrix composite with powder metallurgy technique. The hybrid composites are obtained by milling, blending, and compacting the powders to obtain a fine grain-sized particle without aggregation. The grain size and particle nature were characterized using scanning electron microscope (SEM) and X-ray diffraction (XRD) techniques, respectively. The microstructure, density, hardness, and wear rate of the composites were studied. The pin-on-disc method is equipped to study the wear behaviour and coefficient of friction. The sintered density of the prepared Cu-15%Ni is 98.25 %, Cu-8%Sn is 98.20 %, Cu-15%Ni-8%Sn is 98.10 % and Cu-15%Ni-8%Sn-2%B4C is 95.26 % and lower specific wear rate has been recorded for Cu-15Ni-8Sn-2B4C 121×10-6 mm3/(Nm) and the addition of reinforcement B4C in Cu-Ni-Sn displays remarkable changes in wear rate and friction coefficient.