GAO, Kuidong ;LIU, Jihai ;ZENG, Qingliang ;CHENG, Jingyi ;SUN, Liqing ;LIN, Lisong . Study on the Dynamic Characteristics of Bit Anchor Cable Drilling in the Gravel Sediments of a Soft Rock Bottom Hole. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 69, n.1-2, p. 3-16, december 2022. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/study-on-the-dynamic-characteristics-of-bit-anchor-cable-drilling-in-gravel-sediments-of-a-soft-rock-bottom-hole/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2022.383.
Gao, K., Liu, J., Zeng, Q., Cheng, J., Sun, L., & Lin, L. (2023). Study on the Dynamic Characteristics of Bit Anchor Cable Drilling in the Gravel Sediments of a Soft Rock Bottom Hole. Strojniški vestnik - Journal of Mechanical Engineering, 69(1-2), 3-16. doi:http://dx.doi.org/10.5545/sv-jme.2022.383
@article{sv-jmesv-jme.2022.383, author = {Kuidong Gao and Jihai Liu and Qingliang Zeng and Jingyi Cheng and Liqing Sun and Lisong Lin}, title = {Study on the Dynamic Characteristics of Bit Anchor Cable Drilling in the Gravel Sediments of a Soft Rock Bottom Hole}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {69}, number = {1-2}, year = {2023}, keywords = {bit; anchor cable; gravel drilling; dynamic characteristic; }, abstract = {During the pore-forming stage of floor heave treatment, the phenomenon of gravel sediment accumulation in the bottom hole often occurs, which causes great difficulties in the normal installation of the anchor cable. Based on this observation, a new anchor cable installation method was proposed, which involves installing a drill bit at the front end of the anchor cable to assist its drilling. With the help of an anchor cable drilling test bench, the influence of the bit, motion parameters, and hole environment on the performance of anchor cable drilling was studied. Through the co-simulation of the discrete element method (i.e., multibody dynamics (DEM-MBD)), the drilling process of the bit anchor cable was simulated, and the dynamic characteristics of the bit anchor cable drilling in the bottom hole gravel sediment were analysed. The results show that installing a drill bit in front of the anchor cable can greatly reduce the drilling resistance and hamper torque during anchor cable drilling. When the rotational direction of the bit anchor cable is consistent with the spiral direction of the anchor cable, the bit anchor cable can exhibit better drilling performance. The drilling resistance and hindering torque of the bit anchor cable are the largest when drilling in soaked particles, followed by drilling in dry particles, and the smallest occurs when drilling in moist particles. The research results can provide reference for the parameter setting of anchor cable auxiliary installation equipment.}, issn = {0039-2480}, pages = {3-16}, doi = {10.5545/sv-jme.2022.383}, url = {https://www.sv-jme.eu/article/study-on-the-dynamic-characteristics-of-bit-anchor-cable-drilling-in-gravel-sediments-of-a-soft-rock-bottom-hole/} }
Gao, K.,Liu, J.,Zeng, Q.,Cheng, J.,Sun, L.,Lin, L. 2023 December 69. Study on the Dynamic Characteristics of Bit Anchor Cable Drilling in the Gravel Sediments of a Soft Rock Bottom Hole. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 69:1-2
%A Gao, Kuidong %A Liu, Jihai %A Zeng, Qingliang %A Cheng, Jingyi %A Sun, Liqing %A Lin, Lisong %D 2023 %T Study on the Dynamic Characteristics of Bit Anchor Cable Drilling in the Gravel Sediments of a Soft Rock Bottom Hole %B 2023 %9 bit; anchor cable; gravel drilling; dynamic characteristic; %! Study on the Dynamic Characteristics of Bit Anchor Cable Drilling in the Gravel Sediments of a Soft Rock Bottom Hole %K bit; anchor cable; gravel drilling; dynamic characteristic; %X During the pore-forming stage of floor heave treatment, the phenomenon of gravel sediment accumulation in the bottom hole often occurs, which causes great difficulties in the normal installation of the anchor cable. Based on this observation, a new anchor cable installation method was proposed, which involves installing a drill bit at the front end of the anchor cable to assist its drilling. With the help of an anchor cable drilling test bench, the influence of the bit, motion parameters, and hole environment on the performance of anchor cable drilling was studied. Through the co-simulation of the discrete element method (i.e., multibody dynamics (DEM-MBD)), the drilling process of the bit anchor cable was simulated, and the dynamic characteristics of the bit anchor cable drilling in the bottom hole gravel sediment were analysed. The results show that installing a drill bit in front of the anchor cable can greatly reduce the drilling resistance and hamper torque during anchor cable drilling. When the rotational direction of the bit anchor cable is consistent with the spiral direction of the anchor cable, the bit anchor cable can exhibit better drilling performance. The drilling resistance and hindering torque of the bit anchor cable are the largest when drilling in soaked particles, followed by drilling in dry particles, and the smallest occurs when drilling in moist particles. The research results can provide reference for the parameter setting of anchor cable auxiliary installation equipment. %U https://www.sv-jme.eu/article/study-on-the-dynamic-characteristics-of-bit-anchor-cable-drilling-in-gravel-sediments-of-a-soft-rock-bottom-hole/ %0 Journal Article %R 10.5545/sv-jme.2022.383 %& 3 %P 14 %J Strojniški vestnik - Journal of Mechanical Engineering %V 69 %N 1-2 %@ 0039-2480 %8 2022-12-13 %7 2022-12-13
Gao, Kuidong, Jihai Liu, Qingliang Zeng, Jingyi Cheng, Liqing Sun, & Lisong Lin. "Study on the Dynamic Characteristics of Bit Anchor Cable Drilling in the Gravel Sediments of a Soft Rock Bottom Hole." Strojniški vestnik - Journal of Mechanical Engineering [Online], 69.1-2 (2023): 3-16. Web. 01 Sep. 2024
TY - JOUR AU - Gao, Kuidong AU - Liu, Jihai AU - Zeng, Qingliang AU - Cheng, Jingyi AU - Sun, Liqing AU - Lin, Lisong PY - 2023 TI - Study on the Dynamic Characteristics of Bit Anchor Cable Drilling in the Gravel Sediments of a Soft Rock Bottom Hole JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.383 KW - bit; anchor cable; gravel drilling; dynamic characteristic; N2 - During the pore-forming stage of floor heave treatment, the phenomenon of gravel sediment accumulation in the bottom hole often occurs, which causes great difficulties in the normal installation of the anchor cable. Based on this observation, a new anchor cable installation method was proposed, which involves installing a drill bit at the front end of the anchor cable to assist its drilling. With the help of an anchor cable drilling test bench, the influence of the bit, motion parameters, and hole environment on the performance of anchor cable drilling was studied. Through the co-simulation of the discrete element method (i.e., multibody dynamics (DEM-MBD)), the drilling process of the bit anchor cable was simulated, and the dynamic characteristics of the bit anchor cable drilling in the bottom hole gravel sediment were analysed. The results show that installing a drill bit in front of the anchor cable can greatly reduce the drilling resistance and hamper torque during anchor cable drilling. When the rotational direction of the bit anchor cable is consistent with the spiral direction of the anchor cable, the bit anchor cable can exhibit better drilling performance. The drilling resistance and hindering torque of the bit anchor cable are the largest when drilling in soaked particles, followed by drilling in dry particles, and the smallest occurs when drilling in moist particles. The research results can provide reference for the parameter setting of anchor cable auxiliary installation equipment. UR - https://www.sv-jme.eu/article/study-on-the-dynamic-characteristics-of-bit-anchor-cable-drilling-in-gravel-sediments-of-a-soft-rock-bottom-hole/
@article{{sv-jme}{sv-jme.2022.383}, author = {Gao, K., Liu, J., Zeng, Q., Cheng, J., Sun, L., Lin, L.}, title = {Study on the Dynamic Characteristics of Bit Anchor Cable Drilling in the Gravel Sediments of a Soft Rock Bottom Hole}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {69}, number = {1-2}, year = {2023}, doi = {10.5545/sv-jme.2022.383}, url = {https://www.sv-jme.eu/article/study-on-the-dynamic-characteristics-of-bit-anchor-cable-drilling-in-gravel-sediments-of-a-soft-rock-bottom-hole/} }
TY - JOUR AU - Gao, Kuidong AU - Liu, Jihai AU - Zeng, Qingliang AU - Cheng, Jingyi AU - Sun, Liqing AU - Lin, Lisong PY - 2022/12/13 TI - Study on the Dynamic Characteristics of Bit Anchor Cable Drilling in the Gravel Sediments of a Soft Rock Bottom Hole JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 69, No 1-2 (2023): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.383 KW - bit, anchor cable, gravel drilling, dynamic characteristic, N2 - During the pore-forming stage of floor heave treatment, the phenomenon of gravel sediment accumulation in the bottom hole often occurs, which causes great difficulties in the normal installation of the anchor cable. Based on this observation, a new anchor cable installation method was proposed, which involves installing a drill bit at the front end of the anchor cable to assist its drilling. With the help of an anchor cable drilling test bench, the influence of the bit, motion parameters, and hole environment on the performance of anchor cable drilling was studied. Through the co-simulation of the discrete element method (i.e., multibody dynamics (DEM-MBD)), the drilling process of the bit anchor cable was simulated, and the dynamic characteristics of the bit anchor cable drilling in the bottom hole gravel sediment were analysed. The results show that installing a drill bit in front of the anchor cable can greatly reduce the drilling resistance and hamper torque during anchor cable drilling. When the rotational direction of the bit anchor cable is consistent with the spiral direction of the anchor cable, the bit anchor cable can exhibit better drilling performance. The drilling resistance and hindering torque of the bit anchor cable are the largest when drilling in soaked particles, followed by drilling in dry particles, and the smallest occurs when drilling in moist particles. The research results can provide reference for the parameter setting of anchor cable auxiliary installation equipment. UR - https://www.sv-jme.eu/article/study-on-the-dynamic-characteristics-of-bit-anchor-cable-drilling-in-gravel-sediments-of-a-soft-rock-bottom-hole/
Gao, Kuidong, Liu, Jihai, Zeng, Qingliang, Cheng, Jingyi, Sun, Liqing, AND Lin, Lisong. "Study on the Dynamic Characteristics of Bit Anchor Cable Drilling in the Gravel Sediments of a Soft Rock Bottom Hole" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 69 Number 1-2 (13 December 2022)
Strojniški vestnik - Journal of Mechanical Engineering 69(2023)1-2, 3-16
© The Authors 2023. CC BY-NC 4.0 Int.
During the pore-forming stage of floor heave treatment, the phenomenon of gravel sediment accumulation in the bottom hole often occurs, which causes great difficulties in the normal installation of the anchor cable. Based on this observation, a new anchor cable installation method was proposed, which involves installing a drill bit at the front end of the anchor cable to assist its drilling. With the help of an anchor cable drilling test bench, the influence of the bit, motion parameters, and hole environment on the performance of anchor cable drilling was studied. Through the co-simulation of the discrete element method (i.e., multibody dynamics (DEM-MBD)), the drilling process of the bit anchor cable was simulated, and the dynamic characteristics of the bit anchor cable drilling in the bottom hole gravel sediment were analysed. The results show that installing a drill bit in front of the anchor cable can greatly reduce the drilling resistance and hamper torque during anchor cable drilling. When the rotational direction of the bit anchor cable is consistent with the spiral direction of the anchor cable, the bit anchor cable can exhibit better drilling performance. The drilling resistance and hindering torque of the bit anchor cable are the largest when drilling in soaked particles, followed by drilling in dry particles, and the smallest occurs when drilling in moist particles. The research results can provide reference for the parameter setting of anchor cable auxiliary installation equipment.