NATARAJAN, Muthu Mekala ;CHINNASAMY, Balamurugan ;BEJAXHIN ALPHONSE, Bovas Herbert . Investigation of Machining Parameters in Thin-Walled Plate Milling Using a Fixture with Cylindrical Support Heads. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 68, n.12, p. 746-756, october 2022. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/investigation-of-machining-parameters-in-the-thin-walled-plate-milling-using-the-fixture-with-cylindrical-support-heads/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2022.273.
Natarajan, M., Chinnasamy, B., & Bejaxhin Alphonse, B. (2022). Investigation of Machining Parameters in Thin-Walled Plate Milling Using a Fixture with Cylindrical Support Heads. Strojniški vestnik - Journal of Mechanical Engineering, 68(12), 746-756. doi:http://dx.doi.org/10.5545/sv-jme.2022.273
@article{sv-jmesv-jme.2022.273,
author = {Muthu Mekala Natarajan and Balamurugan Chinnasamy and Bovas Herbert Bejaxhin Alphonse},
title = {Investigation of Machining Parameters in Thin-Walled Plate Milling Using a Fixture with Cylindrical Support Heads},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {68},
number = {12},
year = {2022},
keywords = {End-Milling; fixture; surface roughness; deformation; },
abstract = {Construction, processing, biomedical instruments, electronics, automobiles, and aerospace widely use thin-wall parts. Mostly, these thinwalled parts are machined using either a peripheral milling machine or an end milling machine with the help of fixtures. In this study, three different material thin-walled parts (i.e., Inconel 718, AISI 316L, and Al 6061) are machined in end milling using a newly designed fixture with cylindrical heads, and the surface roughness and deformation with different machining parameters are compared. The optimum values of the machining parameters feed, speed, and depth of cut have been found to improve the surface roughness of thin-walled plates by arresting the deformation using the proposed fixture. Analysis of variance (ANOVA) results show that the speed is the most influential parameter in the case of displacement for AISI 716L and Al 6061, feed is the most influential parameter in the case of surface roughness for Inconel 718 and AISI 716L, and speed is the most influential parameter in the case of displacement and surface roughness for Al 6061. The use of fixtures provides a significant reduction in the deformation and surface roughness during the machining in end milling machine.},
issn = {0039-2480}, pages = {746-756}, doi = {10.5545/sv-jme.2022.273},
url = {https://www.sv-jme.eu/article/investigation-of-machining-parameters-in-the-thin-walled-plate-milling-using-the-fixture-with-cylindrical-support-heads/}
}
Natarajan, M.,Chinnasamy, B.,Bejaxhin Alphonse, B. 2022 October 68. Investigation of Machining Parameters in Thin-Walled Plate Milling Using a Fixture with Cylindrical Support Heads. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 68:12
%A Natarajan, Muthu Mekala %A Chinnasamy, Balamurugan %A Bejaxhin Alphonse, Bovas Herbert %D 2022 %T Investigation of Machining Parameters in Thin-Walled Plate Milling Using a Fixture with Cylindrical Support Heads %B 2022 %9 End-Milling; fixture; surface roughness; deformation; %! Investigation of Machining Parameters in Thin-Walled Plate Milling Using a Fixture with Cylindrical Support Heads %K End-Milling; fixture; surface roughness; deformation; %X Construction, processing, biomedical instruments, electronics, automobiles, and aerospace widely use thin-wall parts. Mostly, these thinwalled parts are machined using either a peripheral milling machine or an end milling machine with the help of fixtures. In this study, three different material thin-walled parts (i.e., Inconel 718, AISI 316L, and Al 6061) are machined in end milling using a newly designed fixture with cylindrical heads, and the surface roughness and deformation with different machining parameters are compared. The optimum values of the machining parameters feed, speed, and depth of cut have been found to improve the surface roughness of thin-walled plates by arresting the deformation using the proposed fixture. Analysis of variance (ANOVA) results show that the speed is the most influential parameter in the case of displacement for AISI 716L and Al 6061, feed is the most influential parameter in the case of surface roughness for Inconel 718 and AISI 716L, and speed is the most influential parameter in the case of displacement and surface roughness for Al 6061. The use of fixtures provides a significant reduction in the deformation and surface roughness during the machining in end milling machine. %U https://www.sv-jme.eu/article/investigation-of-machining-parameters-in-the-thin-walled-plate-milling-using-the-fixture-with-cylindrical-support-heads/ %0 Journal Article %R 10.5545/sv-jme.2022.273 %& 746 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 68 %N 12 %@ 0039-2480 %8 2022-10-13 %7 2022-10-13
Natarajan, Muthu Mekala, Balamurugan Chinnasamy, & Bovas Herbert Bejaxhin Alphonse. "Investigation of Machining Parameters in Thin-Walled Plate Milling Using a Fixture with Cylindrical Support Heads." Strojniški vestnik - Journal of Mechanical Engineering [Online], 68.12 (2022): 746-756. Web. 20 Dec. 2024
TY - JOUR AU - Natarajan, Muthu Mekala AU - Chinnasamy, Balamurugan AU - Bejaxhin Alphonse, Bovas Herbert PY - 2022 TI - Investigation of Machining Parameters in Thin-Walled Plate Milling Using a Fixture with Cylindrical Support Heads JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.273 KW - End-Milling; fixture; surface roughness; deformation; N2 - Construction, processing, biomedical instruments, electronics, automobiles, and aerospace widely use thin-wall parts. Mostly, these thinwalled parts are machined using either a peripheral milling machine or an end milling machine with the help of fixtures. In this study, three different material thin-walled parts (i.e., Inconel 718, AISI 316L, and Al 6061) are machined in end milling using a newly designed fixture with cylindrical heads, and the surface roughness and deformation with different machining parameters are compared. The optimum values of the machining parameters feed, speed, and depth of cut have been found to improve the surface roughness of thin-walled plates by arresting the deformation using the proposed fixture. Analysis of variance (ANOVA) results show that the speed is the most influential parameter in the case of displacement for AISI 716L and Al 6061, feed is the most influential parameter in the case of surface roughness for Inconel 718 and AISI 716L, and speed is the most influential parameter in the case of displacement and surface roughness for Al 6061. The use of fixtures provides a significant reduction in the deformation and surface roughness during the machining in end milling machine. UR - https://www.sv-jme.eu/article/investigation-of-machining-parameters-in-the-thin-walled-plate-milling-using-the-fixture-with-cylindrical-support-heads/
@article{{sv-jme}{sv-jme.2022.273},
author = {Natarajan, M., Chinnasamy, B., Bejaxhin Alphonse, B.},
title = {Investigation of Machining Parameters in Thin-Walled Plate Milling Using a Fixture with Cylindrical Support Heads},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {68},
number = {12},
year = {2022},
doi = {10.5545/sv-jme.2022.273},
url = {https://www.sv-jme.eu/article/investigation-of-machining-parameters-in-the-thin-walled-plate-milling-using-the-fixture-with-cylindrical-support-heads/}
}
TY - JOUR AU - Natarajan, Muthu Mekala AU - Chinnasamy, Balamurugan AU - Bejaxhin Alphonse, Bovas Herbert PY - 2022/10/13 TI - Investigation of Machining Parameters in Thin-Walled Plate Milling Using a Fixture with Cylindrical Support Heads JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 68, No 12 (2022): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.273 KW - End-Milling, fixture, surface roughness, deformation, N2 - Construction, processing, biomedical instruments, electronics, automobiles, and aerospace widely use thin-wall parts. Mostly, these thinwalled parts are machined using either a peripheral milling machine or an end milling machine with the help of fixtures. In this study, three different material thin-walled parts (i.e., Inconel 718, AISI 316L, and Al 6061) are machined in end milling using a newly designed fixture with cylindrical heads, and the surface roughness and deformation with different machining parameters are compared. The optimum values of the machining parameters feed, speed, and depth of cut have been found to improve the surface roughness of thin-walled plates by arresting the deformation using the proposed fixture. Analysis of variance (ANOVA) results show that the speed is the most influential parameter in the case of displacement for AISI 716L and Al 6061, feed is the most influential parameter in the case of surface roughness for Inconel 718 and AISI 716L, and speed is the most influential parameter in the case of displacement and surface roughness for Al 6061. The use of fixtures provides a significant reduction in the deformation and surface roughness during the machining in end milling machine. UR - https://www.sv-jme.eu/article/investigation-of-machining-parameters-in-the-thin-walled-plate-milling-using-the-fixture-with-cylindrical-support-heads/
Natarajan, Muthu Mekala, Chinnasamy, Balamurugan, AND Bejaxhin Alphonse, Bovas Herbert . "Investigation of Machining Parameters in Thin-Walled Plate Milling Using a Fixture with Cylindrical Support Heads" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 68 Number 12 (13 October 2022)
Strojniški vestnik - Journal of Mechanical Engineering 68(2022)12, 746-756
© The Authors 2022. CC BY 4.0 Int.
Construction, processing, biomedical instruments, electronics, automobiles, and aerospace widely use thin-wall parts. Mostly, these thinwalled parts are machined using either a peripheral milling machine or an end milling machine with the help of fixtures. In this study, three different material thin-walled parts (i.e., Inconel 718, AISI 316L, and Al 6061) are machined in end milling using a newly designed fixture with cylindrical heads, and the surface roughness and deformation with different machining parameters are compared. The optimum values of the machining parameters feed, speed, and depth of cut have been found to improve the surface roughness of thin-walled plates by arresting the deformation using the proposed fixture. Analysis of variance (ANOVA) results show that the speed is the most influential parameter in the case of displacement for AISI 716L and Al 6061, feed is the most influential parameter in the case of surface roughness for Inconel 718 and AISI 716L, and speed is the most influential parameter in the case of displacement and surface roughness for Al 6061. The use of fixtures provides a significant reduction in the deformation and surface roughness during the machining in end milling machine.