MOHAMED, Khaled Saad ;AMRI, Fatin ;ELBORAEY, Mostafa Mohamed ; NORDIN, N.H. Diyana ;ABDUL MUTHALIF, Asan Gani . Adaptive Electromagnetic Vibration Absorber for a Multimode Structure. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 68, n.3, p. 191-199, march 2022. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/adaptive-electromagnetic-vibration-absorber-for-a-multimode-structure/>. Date accessed: 31 aug. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2021.7458.
Mohamed, K., Amri, F., Elboraey, M., Nordin, N., & Abdul Muthalif, A. (2022). Adaptive Electromagnetic Vibration Absorber for a Multimode Structure. Strojniški vestnik - Journal of Mechanical Engineering, 68(3), 191-199. doi:http://dx.doi.org/10.5545/sv-jme.2021.7458
@article{sv-jmesv-jme.2021.7458, author = {Khaled Saad Mohamed and Fatin Amri and Mostafa Mohamed Elboraey and N.H. Diyana Nordin and Asan Gani Abdul Muthalif}, title = {Adaptive Electromagnetic Vibration Absorber for a Multimode Structure}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {68}, number = {3}, year = {2022}, keywords = {adaptive vibration absorber; electromagnetic vibration absorber; multimode system; dynamic modelling; structural vibration control; }, abstract = {All structures experience vibrations due to external dynamic force excitations, such as earthquakes and wind loadings. At resonance, the impact of this natural dynamic force on structures may lead to structural failures. Hence, an absorber is mounted to absorb vibrations from the primary system. Unfortunately, passive tuned mass absorbers can only target a single frequency. Since structural buildings possess multiple modes, an adaptive or tune-able vibration absorber is needed to attenuate the vibration in a multi-degree of freedom (MDOF) system. In this work, an adaptive electromagnetic vibration absorber (AEMVA) is proposed to eliminate the effects of vibrations and is dynamically tuned using electromagnets. By varying the current supplied to the coil, the stiffness of the AEMVA can be adjusted, resulting in a varying absorber frequency. A mathematical description of the AEMVA on a three-story prototype model building is also presented. The three-story benchmark model was used to demonstrate the effectiveness of AEMVA in absorbing multiple vibration modes, both analytically and experimentally. It is shown that 68.81 %, 50.49 %, and 33.45 % of vibration amplitude reductions were achieved at the first, second, and third modes, respectively.}, issn = {0039-2480}, pages = {191-199}, doi = {10.5545/sv-jme.2021.7458}, url = {https://www.sv-jme.eu/article/adaptive-electromagnetic-vibration-absorber-for-a-multimode-structure/} }
Mohamed, K.,Amri, F.,Elboraey, M., Nordin, N.,Abdul Muthalif, A. 2022 March 68. Adaptive Electromagnetic Vibration Absorber for a Multimode Structure. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 68:3
%A Mohamed, Khaled Saad %A Amri, Fatin %A Elboraey, Mostafa Mohamed %A Nordin, N.H. Diyana %A Abdul Muthalif, Asan Gani %D 2022 %T Adaptive Electromagnetic Vibration Absorber for a Multimode Structure %B 2022 %9 adaptive vibration absorber; electromagnetic vibration absorber; multimode system; dynamic modelling; structural vibration control; %! Adaptive Electromagnetic Vibration Absorber for a Multimode Structure %K adaptive vibration absorber; electromagnetic vibration absorber; multimode system; dynamic modelling; structural vibration control; %X All structures experience vibrations due to external dynamic force excitations, such as earthquakes and wind loadings. At resonance, the impact of this natural dynamic force on structures may lead to structural failures. Hence, an absorber is mounted to absorb vibrations from the primary system. Unfortunately, passive tuned mass absorbers can only target a single frequency. Since structural buildings possess multiple modes, an adaptive or tune-able vibration absorber is needed to attenuate the vibration in a multi-degree of freedom (MDOF) system. In this work, an adaptive electromagnetic vibration absorber (AEMVA) is proposed to eliminate the effects of vibrations and is dynamically tuned using electromagnets. By varying the current supplied to the coil, the stiffness of the AEMVA can be adjusted, resulting in a varying absorber frequency. A mathematical description of the AEMVA on a three-story prototype model building is also presented. The three-story benchmark model was used to demonstrate the effectiveness of AEMVA in absorbing multiple vibration modes, both analytically and experimentally. It is shown that 68.81 %, 50.49 %, and 33.45 % of vibration amplitude reductions were achieved at the first, second, and third modes, respectively. %U https://www.sv-jme.eu/article/adaptive-electromagnetic-vibration-absorber-for-a-multimode-structure/ %0 Journal Article %R 10.5545/sv-jme.2021.7458 %& 191 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 68 %N 3 %@ 0039-2480 %8 2022-03-15 %7 2022-03-15
Mohamed, Khaled Saad, Fatin Amri, Mostafa Mohamed Elboraey, N.H. Diyana Nordin, & Asan Gani Abdul Muthalif. "Adaptive Electromagnetic Vibration Absorber for a Multimode Structure." Strojniški vestnik - Journal of Mechanical Engineering [Online], 68.3 (2022): 191-199. Web. 31 Aug. 2024
TY - JOUR AU - Mohamed, Khaled Saad AU - Amri, Fatin AU - Elboraey, Mostafa Mohamed AU - Nordin, N.H. Diyana AU - Abdul Muthalif, Asan Gani PY - 2022 TI - Adaptive Electromagnetic Vibration Absorber for a Multimode Structure JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2021.7458 KW - adaptive vibration absorber; electromagnetic vibration absorber; multimode system; dynamic modelling; structural vibration control; N2 - All structures experience vibrations due to external dynamic force excitations, such as earthquakes and wind loadings. At resonance, the impact of this natural dynamic force on structures may lead to structural failures. Hence, an absorber is mounted to absorb vibrations from the primary system. Unfortunately, passive tuned mass absorbers can only target a single frequency. Since structural buildings possess multiple modes, an adaptive or tune-able vibration absorber is needed to attenuate the vibration in a multi-degree of freedom (MDOF) system. In this work, an adaptive electromagnetic vibration absorber (AEMVA) is proposed to eliminate the effects of vibrations and is dynamically tuned using electromagnets. By varying the current supplied to the coil, the stiffness of the AEMVA can be adjusted, resulting in a varying absorber frequency. A mathematical description of the AEMVA on a three-story prototype model building is also presented. The three-story benchmark model was used to demonstrate the effectiveness of AEMVA in absorbing multiple vibration modes, both analytically and experimentally. It is shown that 68.81 %, 50.49 %, and 33.45 % of vibration amplitude reductions were achieved at the first, second, and third modes, respectively. UR - https://www.sv-jme.eu/article/adaptive-electromagnetic-vibration-absorber-for-a-multimode-structure/
@article{{sv-jme}{sv-jme.2021.7458}, author = {Mohamed, K., Amri, F., Elboraey, M., Nordin, N., Abdul Muthalif, A.}, title = {Adaptive Electromagnetic Vibration Absorber for a Multimode Structure}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {68}, number = {3}, year = {2022}, doi = {10.5545/sv-jme.2021.7458}, url = {https://www.sv-jme.eu/article/adaptive-electromagnetic-vibration-absorber-for-a-multimode-structure/} }
TY - JOUR AU - Mohamed, Khaled Saad AU - Amri, Fatin AU - Elboraey, Mostafa Mohamed AU - Nordin, N.H. Diyana AU - Abdul Muthalif, Asan Gani PY - 2022/03/15 TI - Adaptive Electromagnetic Vibration Absorber for a Multimode Structure JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 68, No 3 (2022): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2021.7458 KW - adaptive vibration absorber, electromagnetic vibration absorber, multimode system, dynamic modelling, structural vibration control, N2 - All structures experience vibrations due to external dynamic force excitations, such as earthquakes and wind loadings. At resonance, the impact of this natural dynamic force on structures may lead to structural failures. Hence, an absorber is mounted to absorb vibrations from the primary system. Unfortunately, passive tuned mass absorbers can only target a single frequency. Since structural buildings possess multiple modes, an adaptive or tune-able vibration absorber is needed to attenuate the vibration in a multi-degree of freedom (MDOF) system. In this work, an adaptive electromagnetic vibration absorber (AEMVA) is proposed to eliminate the effects of vibrations and is dynamically tuned using electromagnets. By varying the current supplied to the coil, the stiffness of the AEMVA can be adjusted, resulting in a varying absorber frequency. A mathematical description of the AEMVA on a three-story prototype model building is also presented. The three-story benchmark model was used to demonstrate the effectiveness of AEMVA in absorbing multiple vibration modes, both analytically and experimentally. It is shown that 68.81 %, 50.49 %, and 33.45 % of vibration amplitude reductions were achieved at the first, second, and third modes, respectively. UR - https://www.sv-jme.eu/article/adaptive-electromagnetic-vibration-absorber-for-a-multimode-structure/
Mohamed, Khaled Saad, Amri, Fatin, Elboraey, Mostafa Mohamed, Nordin, N.H. Diyana, AND Abdul Muthalif, Asan Gani. "Adaptive Electromagnetic Vibration Absorber for a Multimode Structure" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 68 Number 3 (15 March 2022)
Strojniški vestnik - Journal of Mechanical Engineering 68(2022)3, 191-199
© The Authors 2022. CC BY 4.0 Int.
All structures experience vibrations due to external dynamic force excitations, such as earthquakes and wind loadings. At resonance, the impact of this natural dynamic force on structures may lead to structural failures. Hence, an absorber is mounted to absorb vibrations from the primary system. Unfortunately, passive tuned mass absorbers can only target a single frequency. Since structural buildings possess multiple modes, an adaptive or tune-able vibration absorber is needed to attenuate the vibration in a multi-degree of freedom (MDOF) system. In this work, an adaptive electromagnetic vibration absorber (AEMVA) is proposed to eliminate the effects of vibrations and is dynamically tuned using electromagnets. By varying the current supplied to the coil, the stiffness of the AEMVA can be adjusted, resulting in a varying absorber frequency. A mathematical description of the AEMVA on a three-story prototype model building is also presented. The three-story benchmark model was used to demonstrate the effectiveness of AEMVA in absorbing multiple vibration modes, both analytically and experimentally. It is shown that 68.81 %, 50.49 %, and 33.45 % of vibration amplitude reductions were achieved at the first, second, and third modes, respectively.