HUSSIEN, Ahmed A.;QASEM, Isam ;KATARAKI, Pramodkumar S.;AL‐KOUZ, Wael ;JANVEKAR, Ayub Ahmed . Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 67, n.4, p. 135-141, may 2021. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/studying-the-performance-of-cutting-carbon-fiber-reinforced-plastic-using-abrasive-water-jet-technique/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2021.7141.
Hussien, A., Qasem, I., Kataraki, P., Al‐Kouz, W., & Janvekar, A. (2021). Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique. Strojniški vestnik - Journal of Mechanical Engineering, 67(4), 135-141. doi:http://dx.doi.org/10.5545/sv-jme.2021.7141
@article{sv-jmesv-jme.2021.7141,
author = {Ahmed A. Hussien and Isam Qasem and Pramodkumar S. Kataraki and Wael Al‐Kouz and Ayub Ahmed Janvekar},
title = {Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {67},
number = {4},
year = {2021},
keywords = {composite materials, CFRP, abrasive water jet, surface quality, roughness, kerf angle},
abstract = {In recent years, composite materials such as carbon-fibre-reinforced plastic (CFRP) have been widely used in medical devices, industries, marine and aerospace applications due to their high resistance-to-weight ratio toughness, corrosion resistance, and other novel properties. The machining of these composite materials using conventional machines results in poor precision and surface finishing due to excess heat generation at the tool-material contact zone. The drawbacks of the conventional machining process can be overcome with the adoption of a novel cutting technique using pressurized water, which can dissipate the heat generated by the impact of abrasive particles against the material in order to eliminate the poor precision and surface finishing caused by overheating. In this experimental study, the performance of surface quality (roughness and kerf angle) of CFRP machining using an abrasive water jet technique has been studied for a wide range of cutting parameters, such as water pressure and cutting speed.},
issn = {0039-2480}, pages = {135-141}, doi = {10.5545/sv-jme.2021.7141},
url = {https://www.sv-jme.eu/article/studying-the-performance-of-cutting-carbon-fiber-reinforced-plastic-using-abrasive-water-jet-technique/}
}
Hussien, A.,Qasem, I.,Kataraki, P.,Al‐Kouz, W.,Janvekar, A. 2021 May 67. Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 67:4
%A Hussien, Ahmed A. %A Qasem, Isam %A Kataraki, Pramodkumar S. %A Al‐Kouz, Wael %A Janvekar, Ayub Ahmed %D 2021 %T Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique %B 2021 %9 composite materials, CFRP, abrasive water jet, surface quality, roughness, kerf angle %! Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique %K composite materials, CFRP, abrasive water jet, surface quality, roughness, kerf angle %X In recent years, composite materials such as carbon-fibre-reinforced plastic (CFRP) have been widely used in medical devices, industries, marine and aerospace applications due to their high resistance-to-weight ratio toughness, corrosion resistance, and other novel properties. The machining of these composite materials using conventional machines results in poor precision and surface finishing due to excess heat generation at the tool-material contact zone. The drawbacks of the conventional machining process can be overcome with the adoption of a novel cutting technique using pressurized water, which can dissipate the heat generated by the impact of abrasive particles against the material in order to eliminate the poor precision and surface finishing caused by overheating. In this experimental study, the performance of surface quality (roughness and kerf angle) of CFRP machining using an abrasive water jet technique has been studied for a wide range of cutting parameters, such as water pressure and cutting speed. %U https://www.sv-jme.eu/article/studying-the-performance-of-cutting-carbon-fiber-reinforced-plastic-using-abrasive-water-jet-technique/ %0 Journal Article %R 10.5545/sv-jme.2021.7141 %& 135 %P 7 %J Strojniški vestnik - Journal of Mechanical Engineering %V 67 %N 4 %@ 0039-2480 %8 2021-05-05 %7 2021-05-05
Hussien, Ahmed, Isam Qasem, Pramodkumar S. Kataraki, Wael Al‐Kouz, & Ayub Ahmed Janvekar. "Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique." Strojniški vestnik - Journal of Mechanical Engineering [Online], 67.4 (2021): 135-141. Web. 20 Dec. 2024
TY - JOUR AU - Hussien, Ahmed A. AU - Qasem, Isam AU - Kataraki, Pramodkumar S. AU - Al‐Kouz, Wael AU - Janvekar, Ayub Ahmed PY - 2021 TI - Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2021.7141 KW - composite materials, CFRP, abrasive water jet, surface quality, roughness, kerf angle N2 - In recent years, composite materials such as carbon-fibre-reinforced plastic (CFRP) have been widely used in medical devices, industries, marine and aerospace applications due to their high resistance-to-weight ratio toughness, corrosion resistance, and other novel properties. The machining of these composite materials using conventional machines results in poor precision and surface finishing due to excess heat generation at the tool-material contact zone. The drawbacks of the conventional machining process can be overcome with the adoption of a novel cutting technique using pressurized water, which can dissipate the heat generated by the impact of abrasive particles against the material in order to eliminate the poor precision and surface finishing caused by overheating. In this experimental study, the performance of surface quality (roughness and kerf angle) of CFRP machining using an abrasive water jet technique has been studied for a wide range of cutting parameters, such as water pressure and cutting speed. UR - https://www.sv-jme.eu/article/studying-the-performance-of-cutting-carbon-fiber-reinforced-plastic-using-abrasive-water-jet-technique/
@article{{sv-jme}{sv-jme.2021.7141},
author = {Hussien, A., Qasem, I., Kataraki, P., Al‐Kouz, W., Janvekar, A.},
title = {Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {67},
number = {4},
year = {2021},
doi = {10.5545/sv-jme.2021.7141},
url = {https://www.sv-jme.eu/article/studying-the-performance-of-cutting-carbon-fiber-reinforced-plastic-using-abrasive-water-jet-technique/}
}
TY - JOUR AU - Hussien, Ahmed A. AU - Qasem, Isam AU - Kataraki, Pramodkumar S. AU - Al‐Kouz, Wael AU - Janvekar, Ayub Ahmed PY - 2021/05/05 TI - Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 67, No 4 (2021): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2021.7141 KW - composite materials, CFRP, abrasive water jet, surface quality, roughness, kerf angle N2 - In recent years, composite materials such as carbon-fibre-reinforced plastic (CFRP) have been widely used in medical devices, industries, marine and aerospace applications due to their high resistance-to-weight ratio toughness, corrosion resistance, and other novel properties. The machining of these composite materials using conventional machines results in poor precision and surface finishing due to excess heat generation at the tool-material contact zone. The drawbacks of the conventional machining process can be overcome with the adoption of a novel cutting technique using pressurized water, which can dissipate the heat generated by the impact of abrasive particles against the material in order to eliminate the poor precision and surface finishing caused by overheating. In this experimental study, the performance of surface quality (roughness and kerf angle) of CFRP machining using an abrasive water jet technique has been studied for a wide range of cutting parameters, such as water pressure and cutting speed. UR - https://www.sv-jme.eu/article/studying-the-performance-of-cutting-carbon-fiber-reinforced-plastic-using-abrasive-water-jet-technique/
Hussien, Ahmed, Qasem, Isam, Kataraki, Pramodkumar, Al‐Kouz, Wael, AND Janvekar, Ayub Ahmed. "Studying the Performance of Cutting Carbon Fibre-Reinforced Plastic Using an Abrasive Water Jet Technique" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 67 Number 4 (05 May 2021)
Strojniški vestnik - Journal of Mechanical Engineering 67(2021)4, 135-141
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In recent years, composite materials such as carbon-fibre-reinforced plastic (CFRP) have been widely used in medical devices, industries, marine and aerospace applications due to their high resistance-to-weight ratio toughness, corrosion resistance, and other novel properties. The machining of these composite materials using conventional machines results in poor precision and surface finishing due to excess heat generation at the tool-material contact zone. The drawbacks of the conventional machining process can be overcome with the adoption of a novel cutting technique using pressurized water, which can dissipate the heat generated by the impact of abrasive particles against the material in order to eliminate the poor precision and surface finishing caused by overheating. In this experimental study, the performance of surface quality (roughness and kerf angle) of CFRP machining using an abrasive water jet technique has been studied for a wide range of cutting parameters, such as water pressure and cutting speed.