AULOVA, Alexandra ;BEK, Marko ;KOSSOVICH, Leonid ;EMRI, Igor . Needleless Electrospinning of PA6 Fibers: The Effect of Solution Concentration and Electrospinning Voltage on Fiber Diameter. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 66, n.7-8, p. 421-430, july 2020. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/needless-electrospinning-of-pa6-fibers-effect-of-solution-concentration-and-electrospinning-voltage-on-fiber-diameter/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2020.6713.
Aulova, A., Bek, M., Kossovich, L., & Emri, I. (2020). Needleless Electrospinning of PA6 Fibers: The Effect of Solution Concentration and Electrospinning Voltage on Fiber Diameter. Strojniški vestnik - Journal of Mechanical Engineering, 66(7-8), 421-430. doi:http://dx.doi.org/10.5545/sv-jme.2020.6713
@article{sv-jmesv-jme.2020.6713,
author = {Alexandra Aulova and Marko Bek and Leonid Kossovich and Igor Emri},
title = {Needleless Electrospinning of PA6 Fibers: The Effect of Solution Concentration and Electrospinning Voltage on Fiber Diameter},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {66},
number = {7-8},
year = {2020},
keywords = {needless electrospinning, nanospider, PA6, fiber diameter, solution concentration, voltage},
abstract = {Needleless electrospinning is the process of forming thin material fibers from the open surface of its solution or melt in a strong electrostatic field. Electrospun non-woven materials are used in various applications that require specific fiber diameters and pore size distributions. Fiber diameter depends on the properties of the polymer solution and manufacturing conditions. A needleless electrospinning process using the Nanospider setup was investigated using the commonly used polyamide 6 (PA6) solution in a mixture of acetic and formic acids. Polymer solutions with different polymer concentrations were characterized by viscosity, surface tension and electrical conductivity. An increase in polymer content in the solution resulted in the exponential increase of the solution viscosity, polynomial increase of electrical conductivity and had almost no effect on surface tension. The effect of the polymer concentration in the solution, as well as electrospinning voltage on fiber diameter and diameter distribution, was investigated using scanning electron microscopy images. The average fiber diameter linearly increases with the increased polymer concentration and also demonstrates an increase with increased electrospinning voltage, although less pronounced. Therefore, a change in the PA6 solution concentration should be used for the robust adjustment of fiber diameter, while changes in electrospinning voltage are more appropriate for fine tuning the fiber diameter during the process of needleless electrospinning.},
issn = {0039-2480}, pages = {421-430}, doi = {10.5545/sv-jme.2020.6713},
url = {https://www.sv-jme.eu/article/needless-electrospinning-of-pa6-fibers-effect-of-solution-concentration-and-electrospinning-voltage-on-fiber-diameter/}
}
Aulova, A.,Bek, M.,Kossovich, L.,Emri, I. 2020 July 66. Needleless Electrospinning of PA6 Fibers: The Effect of Solution Concentration and Electrospinning Voltage on Fiber Diameter. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 66:7-8
%A Aulova, Alexandra %A Bek, Marko %A Kossovich, Leonid %A Emri, Igor %D 2020 %T Needleless Electrospinning of PA6 Fibers: The Effect of Solution Concentration and Electrospinning Voltage on Fiber Diameter %B 2020 %9 needless electrospinning, nanospider, PA6, fiber diameter, solution concentration, voltage %! Needleless Electrospinning of PA6 Fibers: The Effect of Solution Concentration and Electrospinning Voltage on Fiber Diameter %K needless electrospinning, nanospider, PA6, fiber diameter, solution concentration, voltage %X Needleless electrospinning is the process of forming thin material fibers from the open surface of its solution or melt in a strong electrostatic field. Electrospun non-woven materials are used in various applications that require specific fiber diameters and pore size distributions. Fiber diameter depends on the properties of the polymer solution and manufacturing conditions. A needleless electrospinning process using the Nanospider setup was investigated using the commonly used polyamide 6 (PA6) solution in a mixture of acetic and formic acids. Polymer solutions with different polymer concentrations were characterized by viscosity, surface tension and electrical conductivity. An increase in polymer content in the solution resulted in the exponential increase of the solution viscosity, polynomial increase of electrical conductivity and had almost no effect on surface tension. The effect of the polymer concentration in the solution, as well as electrospinning voltage on fiber diameter and diameter distribution, was investigated using scanning electron microscopy images. The average fiber diameter linearly increases with the increased polymer concentration and also demonstrates an increase with increased electrospinning voltage, although less pronounced. Therefore, a change in the PA6 solution concentration should be used for the robust adjustment of fiber diameter, while changes in electrospinning voltage are more appropriate for fine tuning the fiber diameter during the process of needleless electrospinning. %U https://www.sv-jme.eu/article/needless-electrospinning-of-pa6-fibers-effect-of-solution-concentration-and-electrospinning-voltage-on-fiber-diameter/ %0 Journal Article %R 10.5545/sv-jme.2020.6713 %& 421 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 66 %N 7-8 %@ 0039-2480 %8 2020-07-28 %7 2020-07-28
Aulova, Alexandra, Marko Bek, Leonid Kossovich, & Igor Emri. "Needleless Electrospinning of PA6 Fibers: The Effect of Solution Concentration and Electrospinning Voltage on Fiber Diameter." Strojniški vestnik - Journal of Mechanical Engineering [Online], 66.7-8 (2020): 421-430. Web. 20 Dec. 2024
TY - JOUR AU - Aulova, Alexandra AU - Bek, Marko AU - Kossovich, Leonid AU - Emri, Igor PY - 2020 TI - Needleless Electrospinning of PA6 Fibers: The Effect of Solution Concentration and Electrospinning Voltage on Fiber Diameter JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2020.6713 KW - needless electrospinning, nanospider, PA6, fiber diameter, solution concentration, voltage N2 - Needleless electrospinning is the process of forming thin material fibers from the open surface of its solution or melt in a strong electrostatic field. Electrospun non-woven materials are used in various applications that require specific fiber diameters and pore size distributions. Fiber diameter depends on the properties of the polymer solution and manufacturing conditions. A needleless electrospinning process using the Nanospider setup was investigated using the commonly used polyamide 6 (PA6) solution in a mixture of acetic and formic acids. Polymer solutions with different polymer concentrations were characterized by viscosity, surface tension and electrical conductivity. An increase in polymer content in the solution resulted in the exponential increase of the solution viscosity, polynomial increase of electrical conductivity and had almost no effect on surface tension. The effect of the polymer concentration in the solution, as well as electrospinning voltage on fiber diameter and diameter distribution, was investigated using scanning electron microscopy images. The average fiber diameter linearly increases with the increased polymer concentration and also demonstrates an increase with increased electrospinning voltage, although less pronounced. Therefore, a change in the PA6 solution concentration should be used for the robust adjustment of fiber diameter, while changes in electrospinning voltage are more appropriate for fine tuning the fiber diameter during the process of needleless electrospinning. UR - https://www.sv-jme.eu/article/needless-electrospinning-of-pa6-fibers-effect-of-solution-concentration-and-electrospinning-voltage-on-fiber-diameter/
@article{{sv-jme}{sv-jme.2020.6713},
author = {Aulova, A., Bek, M., Kossovich, L., Emri, I.},
title = {Needleless Electrospinning of PA6 Fibers: The Effect of Solution Concentration and Electrospinning Voltage on Fiber Diameter},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {66},
number = {7-8},
year = {2020},
doi = {10.5545/sv-jme.2020.6713},
url = {https://www.sv-jme.eu/article/needless-electrospinning-of-pa6-fibers-effect-of-solution-concentration-and-electrospinning-voltage-on-fiber-diameter/}
}
TY - JOUR AU - Aulova, Alexandra AU - Bek, Marko AU - Kossovich, Leonid AU - Emri, Igor PY - 2020/07/28 TI - Needleless Electrospinning of PA6 Fibers: The Effect of Solution Concentration and Electrospinning Voltage on Fiber Diameter JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 66, No 7-8 (2020): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2020.6713 KW - needless electrospinning, nanospider, PA6, fiber diameter, solution concentration, voltage N2 - Needleless electrospinning is the process of forming thin material fibers from the open surface of its solution or melt in a strong electrostatic field. Electrospun non-woven materials are used in various applications that require specific fiber diameters and pore size distributions. Fiber diameter depends on the properties of the polymer solution and manufacturing conditions. A needleless electrospinning process using the Nanospider setup was investigated using the commonly used polyamide 6 (PA6) solution in a mixture of acetic and formic acids. Polymer solutions with different polymer concentrations were characterized by viscosity, surface tension and electrical conductivity. An increase in polymer content in the solution resulted in the exponential increase of the solution viscosity, polynomial increase of electrical conductivity and had almost no effect on surface tension. The effect of the polymer concentration in the solution, as well as electrospinning voltage on fiber diameter and diameter distribution, was investigated using scanning electron microscopy images. The average fiber diameter linearly increases with the increased polymer concentration and also demonstrates an increase with increased electrospinning voltage, although less pronounced. Therefore, a change in the PA6 solution concentration should be used for the robust adjustment of fiber diameter, while changes in electrospinning voltage are more appropriate for fine tuning the fiber diameter during the process of needleless electrospinning. UR - https://www.sv-jme.eu/article/needless-electrospinning-of-pa6-fibers-effect-of-solution-concentration-and-electrospinning-voltage-on-fiber-diameter/
Aulova, Alexandra, Bek, Marko, Kossovich, Leonid, AND Emri, Igor. "Needleless Electrospinning of PA6 Fibers: The Effect of Solution Concentration and Electrospinning Voltage on Fiber Diameter" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 66 Number 7-8 (28 July 2020)
Strojniški vestnik - Journal of Mechanical Engineering 66(2020)7-8, 421-430
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Needleless electrospinning is the process of forming thin material fibers from the open surface of its solution or melt in a strong electrostatic field. Electrospun non-woven materials are used in various applications that require specific fiber diameters and pore size distributions. Fiber diameter depends on the properties of the polymer solution and manufacturing conditions. A needleless electrospinning process using the Nanospider setup was investigated using the commonly used polyamide 6 (PA6) solution in a mixture of acetic and formic acids. Polymer solutions with different polymer concentrations were characterized by viscosity, surface tension and electrical conductivity. An increase in polymer content in the solution resulted in the exponential increase of the solution viscosity, polynomial increase of electrical conductivity and had almost no effect on surface tension. The effect of the polymer concentration in the solution, as well as electrospinning voltage on fiber diameter and diameter distribution, was investigated using scanning electron microscopy images. The average fiber diameter linearly increases with the increased polymer concentration and also demonstrates an increase with increased electrospinning voltage, although less pronounced. Therefore, a change in the PA6 solution concentration should be used for the robust adjustment of fiber diameter, while changes in electrospinning voltage are more appropriate for fine tuning the fiber diameter during the process of needleless electrospinning.