KOZIOR, Tomasz ;MAMUN, Al ;TRABELSI, Marah ;SABANTINA, Lilia ;EHRMANN, Andrea . Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 66, n.2, p. 105-113, february 2020. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/quality-of-the-surface-texture-and-mechanical-properties-of-fdm-printed-samples-after-thermal-and-chemical-treatment/>. Date accessed: 24 nov. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2019.6322.
Kozior, T., Mamun, A., Trabelsi, M., Sabantina, L., & Ehrmann, A. (2020). Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment. Strojniški vestnik - Journal of Mechanical Engineering, 66(2), 105-113. doi:http://dx.doi.org/10.5545/sv-jme.2019.6322
@article{sv-jmesv-jme.2019.6322,
author = {Tomasz Kozior and Al Mamun and Marah Trabelsi and Lilia Sabantina and Andrea Ehrmann},
title = {Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {66},
number = {2},
year = {2020},
keywords = {3D printing; finishing treatment; fused deposition modelling; surface texture; mechanical properties},
abstract = {Additive manufacturing technologies are nowadays used in various industries. In most cases, however, the surface texture of the produced models is unsatisfactory and requires further processing, aiming to reduce surface roughness and waviness. The quality of the surface layer in many cases plays not only an aesthetic role but also affects, for example, the process of wear and tribological properties. In the presented work, samples prepared by fused deposition modelling technology from polylactic acid (PLA) material were subjected to tests. The samples were subjected to heat or chemical treatment through the use of acetone. The quality of the surface texture was tested both before and after the treatments. In addition, tests were carried out to determine the effect of the presented finishing treatment on the tensile strength of the tested sample models. The test results showed that both thermal treatment and acetone treatment influence the surface texture quality, especially the waviness, and that the acetone treatment can improve some mechanical properties.},
issn = {0039-2480}, pages = {105-113}, doi = {10.5545/sv-jme.2019.6322},
url = {https://www.sv-jme.eu/article/quality-of-the-surface-texture-and-mechanical-properties-of-fdm-printed-samples-after-thermal-and-chemical-treatment/}
}
Kozior, T.,Mamun, A.,Trabelsi, M.,Sabantina, L.,Ehrmann, A. 2020 February 66. Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 66:2
%A Kozior, Tomasz %A Mamun, Al %A Trabelsi, Marah %A Sabantina, Lilia %A Ehrmann, Andrea %D 2020 %T Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment %B 2020 %9 3D printing; finishing treatment; fused deposition modelling; surface texture; mechanical properties %! Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment %K 3D printing; finishing treatment; fused deposition modelling; surface texture; mechanical properties %X Additive manufacturing technologies are nowadays used in various industries. In most cases, however, the surface texture of the produced models is unsatisfactory and requires further processing, aiming to reduce surface roughness and waviness. The quality of the surface layer in many cases plays not only an aesthetic role but also affects, for example, the process of wear and tribological properties. In the presented work, samples prepared by fused deposition modelling technology from polylactic acid (PLA) material were subjected to tests. The samples were subjected to heat or chemical treatment through the use of acetone. The quality of the surface texture was tested both before and after the treatments. In addition, tests were carried out to determine the effect of the presented finishing treatment on the tensile strength of the tested sample models. The test results showed that both thermal treatment and acetone treatment influence the surface texture quality, especially the waviness, and that the acetone treatment can improve some mechanical properties. %U https://www.sv-jme.eu/article/quality-of-the-surface-texture-and-mechanical-properties-of-fdm-printed-samples-after-thermal-and-chemical-treatment/ %0 Journal Article %R 10.5545/sv-jme.2019.6322 %& 105 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 66 %N 2 %@ 0039-2480 %8 2020-02-13 %7 2020-02-13
Kozior, Tomasz, Al Mamun, Marah Trabelsi, Lilia Sabantina, & Andrea Ehrmann. "Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment." Strojniški vestnik - Journal of Mechanical Engineering [Online], 66.2 (2020): 105-113. Web. 24 Nov. 2024
TY - JOUR AU - Kozior, Tomasz AU - Mamun, Al AU - Trabelsi, Marah AU - Sabantina, Lilia AU - Ehrmann, Andrea PY - 2020 TI - Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2019.6322 KW - 3D printing; finishing treatment; fused deposition modelling; surface texture; mechanical properties N2 - Additive manufacturing technologies are nowadays used in various industries. In most cases, however, the surface texture of the produced models is unsatisfactory and requires further processing, aiming to reduce surface roughness and waviness. The quality of the surface layer in many cases plays not only an aesthetic role but also affects, for example, the process of wear and tribological properties. In the presented work, samples prepared by fused deposition modelling technology from polylactic acid (PLA) material were subjected to tests. The samples were subjected to heat or chemical treatment through the use of acetone. The quality of the surface texture was tested both before and after the treatments. In addition, tests were carried out to determine the effect of the presented finishing treatment on the tensile strength of the tested sample models. The test results showed that both thermal treatment and acetone treatment influence the surface texture quality, especially the waviness, and that the acetone treatment can improve some mechanical properties. UR - https://www.sv-jme.eu/article/quality-of-the-surface-texture-and-mechanical-properties-of-fdm-printed-samples-after-thermal-and-chemical-treatment/
@article{{sv-jme}{sv-jme.2019.6322},
author = {Kozior, T., Mamun, A., Trabelsi, M., Sabantina, L., Ehrmann, A.},
title = {Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {66},
number = {2},
year = {2020},
doi = {10.5545/sv-jme.2019.6322},
url = {https://www.sv-jme.eu/article/quality-of-the-surface-texture-and-mechanical-properties-of-fdm-printed-samples-after-thermal-and-chemical-treatment/}
}
TY - JOUR AU - Kozior, Tomasz AU - Mamun, Al AU - Trabelsi, Marah AU - Sabantina, Lilia AU - Ehrmann, Andrea PY - 2020/02/13 TI - Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 66, No 2 (2020): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2019.6322 KW - 3D printing, finishing treatment, fused deposition modelling, surface texture, mechanical properties N2 - Additive manufacturing technologies are nowadays used in various industries. In most cases, however, the surface texture of the produced models is unsatisfactory and requires further processing, aiming to reduce surface roughness and waviness. The quality of the surface layer in many cases plays not only an aesthetic role but also affects, for example, the process of wear and tribological properties. In the presented work, samples prepared by fused deposition modelling technology from polylactic acid (PLA) material were subjected to tests. The samples were subjected to heat or chemical treatment through the use of acetone. The quality of the surface texture was tested both before and after the treatments. In addition, tests were carried out to determine the effect of the presented finishing treatment on the tensile strength of the tested sample models. The test results showed that both thermal treatment and acetone treatment influence the surface texture quality, especially the waviness, and that the acetone treatment can improve some mechanical properties. UR - https://www.sv-jme.eu/article/quality-of-the-surface-texture-and-mechanical-properties-of-fdm-printed-samples-after-thermal-and-chemical-treatment/
Kozior, Tomasz, Mamun, Al, Trabelsi, Marah, Sabantina, Lilia, AND Ehrmann, Andrea. "Quality of the Surface Texture and Mechanical Properties of FDM Printed Samples after Thermal and Chemical Treatment" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 66 Number 2 (13 February 2020)
Strojniški vestnik - Journal of Mechanical Engineering 66(2020)2, 105-113
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Additive manufacturing technologies are nowadays used in various industries. In most cases, however, the surface texture of the produced models is unsatisfactory and requires further processing, aiming to reduce surface roughness and waviness. The quality of the surface layer in many cases plays not only an aesthetic role but also affects, for example, the process of wear and tribological properties. In the presented work, samples prepared by fused deposition modelling technology from polylactic acid (PLA) material were subjected to tests. The samples were subjected to heat or chemical treatment through the use of acetone. The quality of the surface texture was tested both before and after the treatments. In addition, tests were carried out to determine the effect of the presented finishing treatment on the tensile strength of the tested sample models. The test results showed that both thermal treatment and acetone treatment influence the surface texture quality, especially the waviness, and that the acetone treatment can improve some mechanical properties.