ŽAGAR, Sebastjan ;ŠTURM, Roman . Influence of Grinding on Residual Stress Measurements of Shot Peened Aluminium Alloy AA7075. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 65, n.7-8, p. 401-409, july 2019. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/influence-of-grinding-on-the-residual-stress-measurements-of-shot-peened-aluminum-alloy-aa7075/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2019.6083.
Žagar, S., & Šturm, R. (2019). Influence of Grinding on Residual Stress Measurements of Shot Peened Aluminium Alloy AA7075. Strojniški vestnik - Journal of Mechanical Engineering, 65(7-8), 401-409. doi:http://dx.doi.org/10.5545/sv-jme.2019.6083
@article{sv-jmesv-jme.2019.6083, author = {Sebastjan Žagar and Roman Šturm}, title = {Influence of Grinding on Residual Stress Measurements of Shot Peened Aluminium Alloy AA7075}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {65}, number = {7-8}, year = {2019}, keywords = {AA7075; shot peening; microhardness; roughness; residual stresses; blind-hole drilling; X-ray diffraction}, abstract = {The present study aims to investigate the influence of grinding on shot peened (SP) aluminium alloy 7075 by means of residual stresses. The aluminium alloy was subjected to homogenisation annealing at 475 °C for 2 h, followed by quenching in water to room temperature. After that, the surface was shot peened with different Almen intensities and at different coverages to obtain compressive residual stresses in the surface layer of the material. The grinding operation is then followed to reduce the surface roughness and also to increase corrosion resistance. The first method used for measuring residual stresses was a semi-destructive blind-hole drilling method and the second was a non-destructive X-ray diffraction method. The resulting residual stress profiles reveal that residual stresses throughout the surface layer of all shot peened specimens are of a compressive nature. The highest value of residual stress were obtained after shot peening with 16A and a coverage of 200 %, i.e., –377 MPa at a depth of 250 mm. However, regardless of any shot peening parameters, the compressive residual stresses in the specimens are, after reaching maximal values, directed towards the tensile area with a very similar gradient.}, issn = {0039-2480}, pages = {401-409}, doi = {10.5545/sv-jme.2019.6083}, url = {https://www.sv-jme.eu/article/influence-of-grinding-on-the-residual-stress-measurements-of-shot-peened-aluminum-alloy-aa7075/} }
Žagar, S.,Šturm, R. 2019 July 65. Influence of Grinding on Residual Stress Measurements of Shot Peened Aluminium Alloy AA7075. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 65:7-8
%A Žagar, Sebastjan %A Šturm, Roman %D 2019 %T Influence of Grinding on Residual Stress Measurements of Shot Peened Aluminium Alloy AA7075 %B 2019 %9 AA7075; shot peening; microhardness; roughness; residual stresses; blind-hole drilling; X-ray diffraction %! Influence of Grinding on Residual Stress Measurements of Shot Peened Aluminium Alloy AA7075 %K AA7075; shot peening; microhardness; roughness; residual stresses; blind-hole drilling; X-ray diffraction %X The present study aims to investigate the influence of grinding on shot peened (SP) aluminium alloy 7075 by means of residual stresses. The aluminium alloy was subjected to homogenisation annealing at 475 °C for 2 h, followed by quenching in water to room temperature. After that, the surface was shot peened with different Almen intensities and at different coverages to obtain compressive residual stresses in the surface layer of the material. The grinding operation is then followed to reduce the surface roughness and also to increase corrosion resistance. The first method used for measuring residual stresses was a semi-destructive blind-hole drilling method and the second was a non-destructive X-ray diffraction method. The resulting residual stress profiles reveal that residual stresses throughout the surface layer of all shot peened specimens are of a compressive nature. The highest value of residual stress were obtained after shot peening with 16A and a coverage of 200 %, i.e., –377 MPa at a depth of 250 mm. However, regardless of any shot peening parameters, the compressive residual stresses in the specimens are, after reaching maximal values, directed towards the tensile area with a very similar gradient. %U https://www.sv-jme.eu/article/influence-of-grinding-on-the-residual-stress-measurements-of-shot-peened-aluminum-alloy-aa7075/ %0 Journal Article %R 10.5545/sv-jme.2019.6083 %& 401 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 65 %N 7-8 %@ 0039-2480 %8 2019-07-19 %7 2019-07-19
Žagar, Sebastjan, & Roman Šturm. "Influence of Grinding on Residual Stress Measurements of Shot Peened Aluminium Alloy AA7075." Strojniški vestnik - Journal of Mechanical Engineering [Online], 65.7-8 (2019): 401-409. Web. 01 Sep. 2024
TY - JOUR AU - Žagar, Sebastjan AU - Šturm, Roman PY - 2019 TI - Influence of Grinding on Residual Stress Measurements of Shot Peened Aluminium Alloy AA7075 JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2019.6083 KW - AA7075; shot peening; microhardness; roughness; residual stresses; blind-hole drilling; X-ray diffraction N2 - The present study aims to investigate the influence of grinding on shot peened (SP) aluminium alloy 7075 by means of residual stresses. The aluminium alloy was subjected to homogenisation annealing at 475 °C for 2 h, followed by quenching in water to room temperature. After that, the surface was shot peened with different Almen intensities and at different coverages to obtain compressive residual stresses in the surface layer of the material. The grinding operation is then followed to reduce the surface roughness and also to increase corrosion resistance. The first method used for measuring residual stresses was a semi-destructive blind-hole drilling method and the second was a non-destructive X-ray diffraction method. The resulting residual stress profiles reveal that residual stresses throughout the surface layer of all shot peened specimens are of a compressive nature. The highest value of residual stress were obtained after shot peening with 16A and a coverage of 200 %, i.e., –377 MPa at a depth of 250 mm. However, regardless of any shot peening parameters, the compressive residual stresses in the specimens are, after reaching maximal values, directed towards the tensile area with a very similar gradient. UR - https://www.sv-jme.eu/article/influence-of-grinding-on-the-residual-stress-measurements-of-shot-peened-aluminum-alloy-aa7075/
@article{{sv-jme}{sv-jme.2019.6083}, author = {Žagar, S., Šturm, R.}, title = {Influence of Grinding on Residual Stress Measurements of Shot Peened Aluminium Alloy AA7075}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {65}, number = {7-8}, year = {2019}, doi = {10.5545/sv-jme.2019.6083}, url = {https://www.sv-jme.eu/article/influence-of-grinding-on-the-residual-stress-measurements-of-shot-peened-aluminum-alloy-aa7075/} }
TY - JOUR AU - Žagar, Sebastjan AU - Šturm, Roman PY - 2019/07/19 TI - Influence of Grinding on Residual Stress Measurements of Shot Peened Aluminium Alloy AA7075 JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 65, No 7-8 (2019): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2019.6083 KW - AA7075, shot peening, microhardness, roughness, residual stresses, blind-hole drilling, X-ray diffraction N2 - The present study aims to investigate the influence of grinding on shot peened (SP) aluminium alloy 7075 by means of residual stresses. The aluminium alloy was subjected to homogenisation annealing at 475 °C for 2 h, followed by quenching in water to room temperature. After that, the surface was shot peened with different Almen intensities and at different coverages to obtain compressive residual stresses in the surface layer of the material. The grinding operation is then followed to reduce the surface roughness and also to increase corrosion resistance. The first method used for measuring residual stresses was a semi-destructive blind-hole drilling method and the second was a non-destructive X-ray diffraction method. The resulting residual stress profiles reveal that residual stresses throughout the surface layer of all shot peened specimens are of a compressive nature. The highest value of residual stress were obtained after shot peening with 16A and a coverage of 200 %, i.e., –377 MPa at a depth of 250 mm. However, regardless of any shot peening parameters, the compressive residual stresses in the specimens are, after reaching maximal values, directed towards the tensile area with a very similar gradient. UR - https://www.sv-jme.eu/article/influence-of-grinding-on-the-residual-stress-measurements-of-shot-peened-aluminum-alloy-aa7075/
Žagar, Sebastjan, AND Šturm, Roman. "Influence of Grinding on Residual Stress Measurements of Shot Peened Aluminium Alloy AA7075" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 65 Number 7-8 (19 July 2019)
Strojniški vestnik - Journal of Mechanical Engineering 65(2019)7-8, 401-409
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The present study aims to investigate the influence of grinding on shot peened (SP) aluminium alloy 7075 by means of residual stresses. The aluminium alloy was subjected to homogenisation annealing at 475 °C for 2 h, followed by quenching in water to room temperature. After that, the surface was shot peened with different Almen intensities and at different coverages to obtain compressive residual stresses in the surface layer of the material. The grinding operation is then followed to reduce the surface roughness and also to increase corrosion resistance. The first method used for measuring residual stresses was a semi-destructive blind-hole drilling method and the second was a non-destructive X-ray diffraction method. The resulting residual stress profiles reveal that residual stresses throughout the surface layer of all shot peened specimens are of a compressive nature. The highest value of residual stress were obtained after shot peening with 16A and a coverage of 200 %, i.e., –377 MPa at a depth of 250 mm. However, regardless of any shot peening parameters, the compressive residual stresses in the specimens are, after reaching maximal values, directed towards the tensile area with a very similar gradient.