Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions

KOBOLD, Dominik ;PEPELNJAK, Tomaž ;GANTAR, Gašper ;KUZMAN, Karl .
Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 56, n.12, p. 823-832, october 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/analysis-of-deformation-characteristics-of-magnesium-az80-wrought-alloy-under-hot-conditions/>. Date accessed: 20 dec. 2024. 
doi:http://dx.doi.org/.

Kobold, D., Pepelnjak, T., Gantar, G., & Kuzman, K.
(2010).
Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions.
Strojniški vestnik - Journal of Mechanical Engineering, 56(12), 823-832.
doi:http://dx.doi.org/

@article{.,
	author = {Dominik  Kobold and Tomaž  Pepelnjak and Gašper  Gantar and Karl  Kuzman},
	title = {Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {56},
	number = {12},
	year = {2010},
	keywords = {wrought magnesium alloys; magnesium forging; anisotropy; plastic deformation; flow curves; AZ80; },
	abstract = {Light-weight and environmentally friendly materials with good mechanical properties are much appreciated in various modern applications. Weight reduction can improve the performance of many components while reducing the fuel consumption of vehicles.Magnesium is one of the most popular weight-reducing materials because of its low density, good mechanical properties, large natural reserves and good machining properties. The strength, stiffness and favourable metallographic structure of products can be improved by a forging process in which components are shaped from feedstock slugs by applying compressive force through various forging dies. However, widespread usage of forging technology in industrial practice is very rare in comparison to casting, due to the specific deformation characteristics of magnesium having a hexagonal close packed basal crystal structure.This paper deals with the determination of the influence of the most important process parameters on the deformation process of magnesium alloys. On the basis of extensive experimental study, anisotropic flow and the impact of the most important input process factors on the plastic deformation of AZ80 wrought alloy are considered. The results presented in this paper are directly related to industrial practice and have significant potential as a case study for the further development of FEM models capable of predicting anisotropic material flow during applied plastic deformation. The studies presented in the paper also make possible defining recommended technological parameters of the forging process.},
	issn = {0039-2480},	pages = {823-832},	doi = {},
	url = {https://www.sv-jme.eu/article/analysis-of-deformation-characteristics-of-magnesium-az80-wrought-alloy-under-hot-conditions/}
}

Kobold, D.,Pepelnjak, T.,Gantar, G.,Kuzman, K.
2010 October 56. Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 56:12

%A Kobold, Dominik 
%A Pepelnjak, Tomaž 
%A Gantar, Gašper 
%A Kuzman, Karl 
%D 2010
%T Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions
%B 2010
%9 wrought magnesium alloys; magnesium forging; anisotropy; plastic deformation; flow curves; AZ80; 
%! Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions
%K wrought magnesium alloys; magnesium forging; anisotropy; plastic deformation; flow curves; AZ80; 
%X Light-weight and environmentally friendly materials with good mechanical properties are much appreciated in various modern applications. Weight reduction can improve the performance of many components while reducing the fuel consumption of vehicles.Magnesium is one of the most popular weight-reducing materials because of its low density, good mechanical properties, large natural reserves and good machining properties. The strength, stiffness and favourable metallographic structure of products can be improved by a forging process in which components are shaped from feedstock slugs by applying compressive force through various forging dies. However, widespread usage of forging technology in industrial practice is very rare in comparison to casting, due to the specific deformation characteristics of magnesium having a hexagonal close packed basal crystal structure.This paper deals with the determination of the influence of the most important process parameters on the deformation process of magnesium alloys. On the basis of extensive experimental study, anisotropic flow and the impact of the most important input process factors on the plastic deformation of AZ80 wrought alloy are considered. The results presented in this paper are directly related to industrial practice and have significant potential as a case study for the further development of FEM models capable of predicting anisotropic material flow during applied plastic deformation. The studies presented in the paper also make possible defining recommended technological parameters of the forging process.
%U https://www.sv-jme.eu/article/analysis-of-deformation-characteristics-of-magnesium-az80-wrought-alloy-under-hot-conditions/
%0 Journal Article
%R 
%& 823
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 56
%N 12
%@ 0039-2480
%8 2017-10-24
%7 2017-10-24

Kobold, Dominik, Tomaž  Pepelnjak, Gašper  Gantar, & Karl  Kuzman.
"Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions." Strojniški vestnik - Journal of Mechanical Engineering [Online], 56.12 (2010): 823-832. Web.  20 Dec. 2024

TY  - JOUR
AU  - Kobold, Dominik 
AU  - Pepelnjak, Tomaž 
AU  - Gantar, Gašper 
AU  - Kuzman, Karl 
PY  - 2010
TI  - Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - wrought magnesium alloys; magnesium forging; anisotropy; plastic deformation; flow curves; AZ80; 
N2  - Light-weight and environmentally friendly materials with good mechanical properties are much appreciated in various modern applications. Weight reduction can improve the performance of many components while reducing the fuel consumption of vehicles.Magnesium is one of the most popular weight-reducing materials because of its low density, good mechanical properties, large natural reserves and good machining properties. The strength, stiffness and favourable metallographic structure of products can be improved by a forging process in which components are shaped from feedstock slugs by applying compressive force through various forging dies. However, widespread usage of forging technology in industrial practice is very rare in comparison to casting, due to the specific deformation characteristics of magnesium having a hexagonal close packed basal crystal structure.This paper deals with the determination of the influence of the most important process parameters on the deformation process of magnesium alloys. On the basis of extensive experimental study, anisotropic flow and the impact of the most important input process factors on the plastic deformation of AZ80 wrought alloy are considered. The results presented in this paper are directly related to industrial practice and have significant potential as a case study for the further development of FEM models capable of predicting anisotropic material flow during applied plastic deformation. The studies presented in the paper also make possible defining recommended technological parameters of the forging process.
UR  - https://www.sv-jme.eu/article/analysis-of-deformation-characteristics-of-magnesium-az80-wrought-alloy-under-hot-conditions/

@article{{}{.},
	author = {Kobold, D., Pepelnjak, T., Gantar, G., Kuzman, K.},
	title = {Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {56},
	number = {12},
	year = {2010},
	doi = {},
	url = {https://www.sv-jme.eu/article/analysis-of-deformation-characteristics-of-magnesium-az80-wrought-alloy-under-hot-conditions/}
}

TY  - JOUR
AU  - Kobold, Dominik 
AU  - Pepelnjak, Tomaž 
AU  - Gantar, Gašper 
AU  - Kuzman, Karl 
PY  - 2017/10/24
TI  - Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 56, No 12 (2010): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - wrought magnesium alloys, magnesium forging, anisotropy, plastic deformation, flow curves, AZ80, 
N2  - Light-weight and environmentally friendly materials with good mechanical properties are much appreciated in various modern applications. Weight reduction can improve the performance of many components while reducing the fuel consumption of vehicles.Magnesium is one of the most popular weight-reducing materials because of its low density, good mechanical properties, large natural reserves and good machining properties. The strength, stiffness and favourable metallographic structure of products can be improved by a forging process in which components are shaped from feedstock slugs by applying compressive force through various forging dies. However, widespread usage of forging technology in industrial practice is very rare in comparison to casting, due to the specific deformation characteristics of magnesium having a hexagonal close packed basal crystal structure.This paper deals with the determination of the influence of the most important process parameters on the deformation process of magnesium alloys. On the basis of extensive experimental study, anisotropic flow and the impact of the most important input process factors on the plastic deformation of AZ80 wrought alloy are considered. The results presented in this paper are directly related to industrial practice and have significant potential as a case study for the further development of FEM models capable of predicting anisotropic material flow during applied plastic deformation. The studies presented in the paper also make possible defining recommended technological parameters of the forging process.
UR  - https://www.sv-jme.eu/article/analysis-of-deformation-characteristics-of-magnesium-az80-wrought-alloy-under-hot-conditions/

Kobold, Dominik, Pepelnjak, Tomaž, Gantar, Gašper, AND Kuzman, Karl.
"Analysis of Deformation Characteristics of Magnesium AZ80 Wrought Alloy under Hot Conditions" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 56 Number 12 (24 October 2017)