PRIMOŽIČ MERKAČ, Tadeja ;AČKO, Bojan . Thread Gauge Calibration for Industrial Applications. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 56, n.10, p. 637-643, october 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/thread-gauge-calibration-for-industrial-applications/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/.
Primožič Merkač, T., & Ačko, B. (2010). Thread Gauge Calibration for Industrial Applications. Strojniški vestnik - Journal of Mechanical Engineering, 56(10), 637-643. doi:http://dx.doi.org/
@article{.,
author = {Tadeja Primožič Merkač and Bojan Ačko},
title = {Thread Gauge Calibration for Industrial Applications},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {56},
number = {10},
year = {2010},
keywords = {thread ring gauge; calibration; pitch diameter; measurement uncertainty; dimensional measurements; },
abstract = {There are two most commonly used methods for calibration of thread rings, with different measuring uncertainty. The method of mechanical sensing with two balls is mostly used on one-axial measuring machines and on coordinate measuring machines. However, the method of calculating the core diameter of the thread ring combined with the technique of adaptation (in accordance with the method of the smallest squares) is used on the profile scanner. The required tolerances, which are very narrow for adjustable and laboratory thread ring, so the measuring uncertainty may be too high when using the method of mechanical sensing with two balls, and the low quality of some control rings, are the decisive factors for choosing an appropriate method in the industry. This also depends on the laboratory’s capability of executing a specific method. The measurements of the core diameter of thread rings, which are the main topic of this article, were included into an international inter-comparison in which the main subject was the same thread ring as the one mentioned in this article.},
issn = {0039-2480}, pages = {637-643}, doi = {},
url = {https://www.sv-jme.eu/article/thread-gauge-calibration-for-industrial-applications/}
}
Primožič Merkač, T.,Ačko, B. 2010 October 56. Thread Gauge Calibration for Industrial Applications. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 56:10
%A Primožič Merkač, Tadeja %A Ačko, Bojan %D 2010 %T Thread Gauge Calibration for Industrial Applications %B 2010 %9 thread ring gauge; calibration; pitch diameter; measurement uncertainty; dimensional measurements; %! Thread Gauge Calibration for Industrial Applications %K thread ring gauge; calibration; pitch diameter; measurement uncertainty; dimensional measurements; %X There are two most commonly used methods for calibration of thread rings, with different measuring uncertainty. The method of mechanical sensing with two balls is mostly used on one-axial measuring machines and on coordinate measuring machines. However, the method of calculating the core diameter of the thread ring combined with the technique of adaptation (in accordance with the method of the smallest squares) is used on the profile scanner. The required tolerances, which are very narrow for adjustable and laboratory thread ring, so the measuring uncertainty may be too high when using the method of mechanical sensing with two balls, and the low quality of some control rings, are the decisive factors for choosing an appropriate method in the industry. This also depends on the laboratory’s capability of executing a specific method. The measurements of the core diameter of thread rings, which are the main topic of this article, were included into an international inter-comparison in which the main subject was the same thread ring as the one mentioned in this article. %U https://www.sv-jme.eu/article/thread-gauge-calibration-for-industrial-applications/ %0 Journal Article %R %& 637 %P 7 %J Strojniški vestnik - Journal of Mechanical Engineering %V 56 %N 10 %@ 0039-2480 %8 2017-10-24 %7 2017-10-24
Primožič Merkač, Tadeja, & Bojan Ačko. "Thread Gauge Calibration for Industrial Applications." Strojniški vestnik - Journal of Mechanical Engineering [Online], 56.10 (2010): 637-643. Web. 20 Dec. 2024
TY - JOUR AU - Primožič Merkač, Tadeja AU - Ačko, Bojan PY - 2010 TI - Thread Gauge Calibration for Industrial Applications JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - thread ring gauge; calibration; pitch diameter; measurement uncertainty; dimensional measurements; N2 - There are two most commonly used methods for calibration of thread rings, with different measuring uncertainty. The method of mechanical sensing with two balls is mostly used on one-axial measuring machines and on coordinate measuring machines. However, the method of calculating the core diameter of the thread ring combined with the technique of adaptation (in accordance with the method of the smallest squares) is used on the profile scanner. The required tolerances, which are very narrow for adjustable and laboratory thread ring, so the measuring uncertainty may be too high when using the method of mechanical sensing with two balls, and the low quality of some control rings, are the decisive factors for choosing an appropriate method in the industry. This also depends on the laboratory’s capability of executing a specific method. The measurements of the core diameter of thread rings, which are the main topic of this article, were included into an international inter-comparison in which the main subject was the same thread ring as the one mentioned in this article. UR - https://www.sv-jme.eu/article/thread-gauge-calibration-for-industrial-applications/
@article{{}{.},
author = {Primožič Merkač, T., Ačko, B.},
title = {Thread Gauge Calibration for Industrial Applications},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {56},
number = {10},
year = {2010},
doi = {},
url = {https://www.sv-jme.eu/article/thread-gauge-calibration-for-industrial-applications/}
}
TY - JOUR AU - Primožič Merkač, Tadeja AU - Ačko, Bojan PY - 2017/10/24 TI - Thread Gauge Calibration for Industrial Applications JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 56, No 10 (2010): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - thread ring gauge, calibration, pitch diameter, measurement uncertainty, dimensional measurements, N2 - There are two most commonly used methods for calibration of thread rings, with different measuring uncertainty. The method of mechanical sensing with two balls is mostly used on one-axial measuring machines and on coordinate measuring machines. However, the method of calculating the core diameter of the thread ring combined with the technique of adaptation (in accordance with the method of the smallest squares) is used on the profile scanner. The required tolerances, which are very narrow for adjustable and laboratory thread ring, so the measuring uncertainty may be too high when using the method of mechanical sensing with two balls, and the low quality of some control rings, are the decisive factors for choosing an appropriate method in the industry. This also depends on the laboratory’s capability of executing a specific method. The measurements of the core diameter of thread rings, which are the main topic of this article, were included into an international inter-comparison in which the main subject was the same thread ring as the one mentioned in this article. UR - https://www.sv-jme.eu/article/thread-gauge-calibration-for-industrial-applications/
Primožič Merkač, Tadeja, AND Ačko, Bojan. "Thread Gauge Calibration for Industrial Applications" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 56 Number 10 (24 October 2017)
Strojniški vestnik - Journal of Mechanical Engineering 56(2010)10, 637-643
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
There are two most commonly used methods for calibration of thread rings, with different measuring uncertainty. The method of mechanical sensing with two balls is mostly used on one-axial measuring machines and on coordinate measuring machines. However, the method of calculating the core diameter of the thread ring combined with the technique of adaptation (in accordance with the method of the smallest squares) is used on the profile scanner. The required tolerances, which are very narrow for adjustable and laboratory thread ring, so the measuring uncertainty may be too high when using the method of mechanical sensing with two balls, and the low quality of some control rings, are the decisive factors for choosing an appropriate method in the industry. This also depends on the laboratory’s capability of executing a specific method. The measurements of the core diameter of thread rings, which are the main topic of this article, were included into an international inter-comparison in which the main subject was the same thread ring as the one mentioned in this article.