CSOBÁN, Attila ;KOZMA, Mihály . Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 56, n.4, p. 245-252, october 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/influence-of-the-oil-churning-the-bearing-and-the-tooth-friction-losses-on-the-efficiency-of-planetary-gears/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/.
Csobán, A., & Kozma, M. (2010). Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears. Strojniški vestnik - Journal of Mechanical Engineering, 56(4), 245-252. doi:http://dx.doi.org/
@article{.,
author = {Attila Csobán and Mihály Kozma},
title = {Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {56},
number = {4},
year = {2010},
keywords = {tooth friction loss; bearing friction loss; oil churning loss; loss of expel; efficiency; },
abstract = {Gear tooth modifications, such as lead crowning, are often recommended to compensate for misalignment (e.g. assembly deviations). Lead crowning means that the tooth centre is slightly thicker than the tooth edges and is usually described as a circular arc profile. The use of crowning shifts the peak load from the tooth flank edges and therefore reduces the risk for high contact pressures at the edges, which can otherwise result in a shortened service life. In this study a logarithmical lead profile was compared with traditional lead profile modifications for gears. The profiles were applied on a spur gear pair and a numerical method for contact analysis was used to calculate the contact pressure distribution at the pitch diameter. All lead profiles were optimised with respect to low contact pressure at a specific normal load, a specified maximum misalignment in the plane of action and a tooth flank edge contact criteria. The results show that the logarithmical profile responds differently to misalignments compared to the traditional lead profile modifications. The logarithmical profile resulted in lower maximum contact pressures for small misalignments and is therefore of further interest in terms of achieving a robust gear design.},
issn = {0039-2480}, pages = {245-252}, doi = {},
url = {https://www.sv-jme.eu/article/influence-of-the-oil-churning-the-bearing-and-the-tooth-friction-losses-on-the-efficiency-of-planetary-gears/}
}
Csobán, A.,Kozma, M. 2010 October 56. Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 56:4
%A Csobán, Attila %A Kozma, Mihály %D 2010 %T Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears %B 2010 %9 tooth friction loss; bearing friction loss; oil churning loss; loss of expel; efficiency; %! Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears %K tooth friction loss; bearing friction loss; oil churning loss; loss of expel; efficiency; %X Gear tooth modifications, such as lead crowning, are often recommended to compensate for misalignment (e.g. assembly deviations). Lead crowning means that the tooth centre is slightly thicker than the tooth edges and is usually described as a circular arc profile. The use of crowning shifts the peak load from the tooth flank edges and therefore reduces the risk for high contact pressures at the edges, which can otherwise result in a shortened service life. In this study a logarithmical lead profile was compared with traditional lead profile modifications for gears. The profiles were applied on a spur gear pair and a numerical method for contact analysis was used to calculate the contact pressure distribution at the pitch diameter. All lead profiles were optimised with respect to low contact pressure at a specific normal load, a specified maximum misalignment in the plane of action and a tooth flank edge contact criteria. The results show that the logarithmical profile responds differently to misalignments compared to the traditional lead profile modifications. The logarithmical profile resulted in lower maximum contact pressures for small misalignments and is therefore of further interest in terms of achieving a robust gear design. %U https://www.sv-jme.eu/article/influence-of-the-oil-churning-the-bearing-and-the-tooth-friction-losses-on-the-efficiency-of-planetary-gears/ %0 Journal Article %R %& 245 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 56 %N 4 %@ 0039-2480 %8 2017-10-24 %7 2017-10-24
Csobán, Attila, & Mihály Kozma. "Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears." Strojniški vestnik - Journal of Mechanical Engineering [Online], 56.4 (2010): 245-252. Web. 20 Dec. 2024
TY - JOUR AU - Csobán, Attila AU - Kozma, Mihály PY - 2010 TI - Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - tooth friction loss; bearing friction loss; oil churning loss; loss of expel; efficiency; N2 - Gear tooth modifications, such as lead crowning, are often recommended to compensate for misalignment (e.g. assembly deviations). Lead crowning means that the tooth centre is slightly thicker than the tooth edges and is usually described as a circular arc profile. The use of crowning shifts the peak load from the tooth flank edges and therefore reduces the risk for high contact pressures at the edges, which can otherwise result in a shortened service life. In this study a logarithmical lead profile was compared with traditional lead profile modifications for gears. The profiles were applied on a spur gear pair and a numerical method for contact analysis was used to calculate the contact pressure distribution at the pitch diameter. All lead profiles were optimised with respect to low contact pressure at a specific normal load, a specified maximum misalignment in the plane of action and a tooth flank edge contact criteria. The results show that the logarithmical profile responds differently to misalignments compared to the traditional lead profile modifications. The logarithmical profile resulted in lower maximum contact pressures for small misalignments and is therefore of further interest in terms of achieving a robust gear design. UR - https://www.sv-jme.eu/article/influence-of-the-oil-churning-the-bearing-and-the-tooth-friction-losses-on-the-efficiency-of-planetary-gears/
@article{{}{.},
author = {Csobán, A., Kozma, M.},
title = {Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {56},
number = {4},
year = {2010},
doi = {},
url = {https://www.sv-jme.eu/article/influence-of-the-oil-churning-the-bearing-and-the-tooth-friction-losses-on-the-efficiency-of-planetary-gears/}
}
TY - JOUR AU - Csobán, Attila AU - Kozma, Mihály PY - 2017/10/24 TI - Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 56, No 4 (2010): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - tooth friction loss, bearing friction loss, oil churning loss, loss of expel, efficiency, N2 - Gear tooth modifications, such as lead crowning, are often recommended to compensate for misalignment (e.g. assembly deviations). Lead crowning means that the tooth centre is slightly thicker than the tooth edges and is usually described as a circular arc profile. The use of crowning shifts the peak load from the tooth flank edges and therefore reduces the risk for high contact pressures at the edges, which can otherwise result in a shortened service life. In this study a logarithmical lead profile was compared with traditional lead profile modifications for gears. The profiles were applied on a spur gear pair and a numerical method for contact analysis was used to calculate the contact pressure distribution at the pitch diameter. All lead profiles were optimised with respect to low contact pressure at a specific normal load, a specified maximum misalignment in the plane of action and a tooth flank edge contact criteria. The results show that the logarithmical profile responds differently to misalignments compared to the traditional lead profile modifications. The logarithmical profile resulted in lower maximum contact pressures for small misalignments and is therefore of further interest in terms of achieving a robust gear design. UR - https://www.sv-jme.eu/article/influence-of-the-oil-churning-the-bearing-and-the-tooth-friction-losses-on-the-efficiency-of-planetary-gears/
Csobán, Attila, AND Kozma, Mihály. "Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 56 Number 4 (24 October 2017)
Strojniški vestnik - Journal of Mechanical Engineering 56(2010)4, 245-252
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Gear tooth modifications, such as lead crowning, are often recommended to compensate for misalignment (e.g. assembly deviations). Lead crowning means that the tooth centre is slightly thicker than the tooth edges and is usually described as a circular arc profile. The use of crowning shifts the peak load from the tooth flank edges and therefore reduces the risk for high contact pressures at the edges, which can otherwise result in a shortened service life. In this study a logarithmical lead profile was compared with traditional lead profile modifications for gears. The profiles were applied on a spur gear pair and a numerical method for contact analysis was used to calculate the contact pressure distribution at the pitch diameter. All lead profiles were optimised with respect to low contact pressure at a specific normal load, a specified maximum misalignment in the plane of action and a tooth flank edge contact criteria. The results show that the logarithmical profile responds differently to misalignments compared to the traditional lead profile modifications. The logarithmical profile resulted in lower maximum contact pressures for small misalignments and is therefore of further interest in terms of achieving a robust gear design.