ISIK, Yahya . An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 56, n.3, p. 195-201, october 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/an-experimental-investigation-on-effect-of-cutting-fluids-in-turning-with-coated-carbides-tool/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/.
Isik, Y. (2010). An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool. Strojniški vestnik - Journal of Mechanical Engineering, 56(3), 195-201. doi:http://dx.doi.org/
@article{.,
author = {Yahya Isik},
title = {An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {56},
number = {3},
year = {2010},
keywords = {flank wear; tool life; tool wear; cutting forces; cooling; },
abstract = {The major needs in machining are high material removal rate, good work surface finish and low tool wear. These objectives can be achieved by reducing tool wear using proper cooling system of the tool during machining. The work aims to seek conditions in which dry cutting is satisfactory compared with the flood of fluid usually used. The cutting tool used in this research is CVD coated carbide TiC+AI2O3+TiN insert (ISO P25). The type of inserts is DNMG 150608. During the experiments flank wear, cutting force and surface roughness value were measured throughout the tool life. The results have been compared with dry and wet-cooled turning. The results of the present work indicate substantial reduction in tool wear, which enhanced the tool life; this may be mainly attributed to reduction in cutting zone temperature and favorable change in the chip-tool interaction.},
issn = {0039-2480}, pages = {195-201}, doi = {},
url = {https://www.sv-jme.eu/article/an-experimental-investigation-on-effect-of-cutting-fluids-in-turning-with-coated-carbides-tool/}
}
Isik, Y. 2010 October 56. An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 56:3
%A Isik, Yahya %D 2010 %T An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool %B 2010 %9 flank wear; tool life; tool wear; cutting forces; cooling; %! An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool %K flank wear; tool life; tool wear; cutting forces; cooling; %X The major needs in machining are high material removal rate, good work surface finish and low tool wear. These objectives can be achieved by reducing tool wear using proper cooling system of the tool during machining. The work aims to seek conditions in which dry cutting is satisfactory compared with the flood of fluid usually used. The cutting tool used in this research is CVD coated carbide TiC+AI2O3+TiN insert (ISO P25). The type of inserts is DNMG 150608. During the experiments flank wear, cutting force and surface roughness value were measured throughout the tool life. The results have been compared with dry and wet-cooled turning. The results of the present work indicate substantial reduction in tool wear, which enhanced the tool life; this may be mainly attributed to reduction in cutting zone temperature and favorable change in the chip-tool interaction. %U https://www.sv-jme.eu/article/an-experimental-investigation-on-effect-of-cutting-fluids-in-turning-with-coated-carbides-tool/ %0 Journal Article %R %& 195 %P 7 %J Strojniški vestnik - Journal of Mechanical Engineering %V 56 %N 3 %@ 0039-2480 %8 2017-10-24 %7 2017-10-24
Isik, Yahya. "An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool." Strojniški vestnik - Journal of Mechanical Engineering [Online], 56.3 (2010): 195-201. Web. 20 Dec. 2024
TY - JOUR AU - Isik, Yahya PY - 2010 TI - An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - flank wear; tool life; tool wear; cutting forces; cooling; N2 - The major needs in machining are high material removal rate, good work surface finish and low tool wear. These objectives can be achieved by reducing tool wear using proper cooling system of the tool during machining. The work aims to seek conditions in which dry cutting is satisfactory compared with the flood of fluid usually used. The cutting tool used in this research is CVD coated carbide TiC+AI2O3+TiN insert (ISO P25). The type of inserts is DNMG 150608. During the experiments flank wear, cutting force and surface roughness value were measured throughout the tool life. The results have been compared with dry and wet-cooled turning. The results of the present work indicate substantial reduction in tool wear, which enhanced the tool life; this may be mainly attributed to reduction in cutting zone temperature and favorable change in the chip-tool interaction. UR - https://www.sv-jme.eu/article/an-experimental-investigation-on-effect-of-cutting-fluids-in-turning-with-coated-carbides-tool/
@article{{}{.},
author = {Isik, Y.},
title = {An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {56},
number = {3},
year = {2010},
doi = {},
url = {https://www.sv-jme.eu/article/an-experimental-investigation-on-effect-of-cutting-fluids-in-turning-with-coated-carbides-tool/}
}
TY - JOUR AU - Isik, Yahya PY - 2017/10/24 TI - An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 56, No 3 (2010): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - flank wear, tool life, tool wear, cutting forces, cooling, N2 - The major needs in machining are high material removal rate, good work surface finish and low tool wear. These objectives can be achieved by reducing tool wear using proper cooling system of the tool during machining. The work aims to seek conditions in which dry cutting is satisfactory compared with the flood of fluid usually used. The cutting tool used in this research is CVD coated carbide TiC+AI2O3+TiN insert (ISO P25). The type of inserts is DNMG 150608. During the experiments flank wear, cutting force and surface roughness value were measured throughout the tool life. The results have been compared with dry and wet-cooled turning. The results of the present work indicate substantial reduction in tool wear, which enhanced the tool life; this may be mainly attributed to reduction in cutting zone temperature and favorable change in the chip-tool interaction. UR - https://www.sv-jme.eu/article/an-experimental-investigation-on-effect-of-cutting-fluids-in-turning-with-coated-carbides-tool/
Isik, Yahya"An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 56 Number 3 (24 October 2017)
Strojniški vestnik - Journal of Mechanical Engineering 56(2010)3, 195-201
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The major needs in machining are high material removal rate, good work surface finish and low tool wear. These objectives can be achieved by reducing tool wear using proper cooling system of the tool during machining. The work aims to seek conditions in which dry cutting is satisfactory compared with the flood of fluid usually used. The cutting tool used in this research is CVD coated carbide TiC+AI2O3+TiN insert (ISO P25). The type of inserts is DNMG 150608. During the experiments flank wear, cutting force and surface roughness value were measured throughout the tool life. The results have been compared with dry and wet-cooled turning. The results of the present work indicate substantial reduction in tool wear, which enhanced the tool life; this may be mainly attributed to reduction in cutting zone temperature and favorable change in the chip-tool interaction.