OMAN, Simon ;NAGODE, Marko . Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 63, n.11, p. 617-627, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2017.4638.
Oman, S., & Nagode, M. (2017). Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force. Strojniški vestnik - Journal of Mechanical Engineering, 63(11), 617-627. doi:http://dx.doi.org/10.5545/sv-jme.2017.4638
@article{sv-jmesv-jme.2017.4638, author = {Simon Oman and Marko Nagode}, title = {Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {63}, number = {11}, year = {2017}, keywords = {bolted connection; operating force; bolt pretension; structural steel; finite element method}, abstract = {This paper presents an alternative method for calculating the operating forces on bolts in the bolted connections of the end-plate cantilever beams. Since operating force reduces pressure between the joined surfaces the influence of the operating force needs to be considered when determining the clamping force. Therefore, correctly defined operational force on each bolt is a base for all further calculations. To evaluate proposed method, results of four existing analytical methods for calculating the operating forces in the bolted connections of the end-plate cantilever beams are compared with the results of the alternative method and the results gained by finite element analyses. Because finite element analysis take into account all influential parameters it is expected that the results obtained by finite element analyses are a good approximation to reality and can serve as a reference when comparing different analytical methods. It turns out that the results of the proposed method coincide with the results of finite element analyses the most. Only the proposed method correctly determines which bolts in the connection are subjected to the highest additional loads.}, issn = {0039-2480}, pages = {617-627}, doi = {10.5545/sv-jme.2017.4638}, url = {https://www.sv-jme.eu/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/} }
Oman, S.,Nagode, M. 2017 June 63. Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 63:11
%A Oman, Simon %A Nagode, Marko %D 2017 %T Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force %B 2017 %9 bolted connection; operating force; bolt pretension; structural steel; finite element method %! Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force %K bolted connection; operating force; bolt pretension; structural steel; finite element method %X This paper presents an alternative method for calculating the operating forces on bolts in the bolted connections of the end-plate cantilever beams. Since operating force reduces pressure between the joined surfaces the influence of the operating force needs to be considered when determining the clamping force. Therefore, correctly defined operational force on each bolt is a base for all further calculations. To evaluate proposed method, results of four existing analytical methods for calculating the operating forces in the bolted connections of the end-plate cantilever beams are compared with the results of the alternative method and the results gained by finite element analyses. Because finite element analysis take into account all influential parameters it is expected that the results obtained by finite element analyses are a good approximation to reality and can serve as a reference when comparing different analytical methods. It turns out that the results of the proposed method coincide with the results of finite element analyses the most. Only the proposed method correctly determines which bolts in the connection are subjected to the highest additional loads. %U https://www.sv-jme.eu/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/ %0 Journal Article %R 10.5545/sv-jme.2017.4638 %& 617 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 63 %N 11 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Oman, Simon, & Marko Nagode. "Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force." Strojniški vestnik - Journal of Mechanical Engineering [Online], 63.11 (2017): 617-627. Web. 01 Sep. 2024
TY - JOUR AU - Oman, Simon AU - Nagode, Marko PY - 2017 TI - Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2017.4638 KW - bolted connection; operating force; bolt pretension; structural steel; finite element method N2 - This paper presents an alternative method for calculating the operating forces on bolts in the bolted connections of the end-plate cantilever beams. Since operating force reduces pressure between the joined surfaces the influence of the operating force needs to be considered when determining the clamping force. Therefore, correctly defined operational force on each bolt is a base for all further calculations. To evaluate proposed method, results of four existing analytical methods for calculating the operating forces in the bolted connections of the end-plate cantilever beams are compared with the results of the alternative method and the results gained by finite element analyses. Because finite element analysis take into account all influential parameters it is expected that the results obtained by finite element analyses are a good approximation to reality and can serve as a reference when comparing different analytical methods. It turns out that the results of the proposed method coincide with the results of finite element analyses the most. Only the proposed method correctly determines which bolts in the connection are subjected to the highest additional loads. UR - https://www.sv-jme.eu/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/
@article{{sv-jme}{sv-jme.2017.4638}, author = {Oman, S., Nagode, M.}, title = {Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {63}, number = {11}, year = {2017}, doi = {10.5545/sv-jme.2017.4638}, url = {https://www.sv-jme.eu/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/} }
TY - JOUR AU - Oman, Simon AU - Nagode, Marko PY - 2018/06/27 TI - Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 63, No 11 (2017): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2017.4638 KW - bolted connection, operating force, bolt pretension, structural steel, finite element method N2 - This paper presents an alternative method for calculating the operating forces on bolts in the bolted connections of the end-plate cantilever beams. Since operating force reduces pressure between the joined surfaces the influence of the operating force needs to be considered when determining the clamping force. Therefore, correctly defined operational force on each bolt is a base for all further calculations. To evaluate proposed method, results of four existing analytical methods for calculating the operating forces in the bolted connections of the end-plate cantilever beams are compared with the results of the alternative method and the results gained by finite element analyses. Because finite element analysis take into account all influential parameters it is expected that the results obtained by finite element analyses are a good approximation to reality and can serve as a reference when comparing different analytical methods. It turns out that the results of the proposed method coincide with the results of finite element analyses the most. Only the proposed method correctly determines which bolts in the connection are subjected to the highest additional loads. UR - https://www.sv-jme.eu/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/
Oman, Simon, AND Nagode, Marko. "Bolted Connection of an End-Plate Cantilever Beam: The Distribution of Operating Force" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 63 Number 11 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 63(2017)11, 617-627
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper presents an alternative method for calculating the operating forces on bolts in the bolted connections of the end-plate cantilever beams. Since operating force reduces pressure between the joined surfaces the influence of the operating force needs to be considered when determining the clamping force. Therefore, correctly defined operational force on each bolt is a base for all further calculations. To evaluate proposed method, results of four existing analytical methods for calculating the operating forces in the bolted connections of the end-plate cantilever beams are compared with the results of the alternative method and the results gained by finite element analyses. Because finite element analysis take into account all influential parameters it is expected that the results obtained by finite element analyses are a good approximation to reality and can serve as a reference when comparing different analytical methods. It turns out that the results of the proposed method coincide with the results of finite element analyses the most. Only the proposed method correctly determines which bolts in the connection are subjected to the highest additional loads.