KURT, Abdullah ;KOSE, Erdogan ;SAHINBASKAN, Turkun . The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 55, n.10, p. 633-640, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/.
Kurt, A., Kose, E., & Sahinbaskan, T. (2009). The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials. Strojniški vestnik - Journal of Mechanical Engineering, 55(10), 633-640. doi:http://dx.doi.org/
@article{.,
author = {Abdullah Kurt and Erdogan Kose and Turkun Sahinbaskan},
title = {The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {55},
number = {10},
year = {2009},
keywords = {paper; blade; stress; ANSYS; },
abstract = {In the printing sector knives (blades) are used during pre-printing, printing and post-printing. Therefore, paper type, blade angles, the sharpness of blades and applied pressure are all important factors in terms of cutting quality. In this study, during the cutting of different kinds of paper material, the effects of blade angle on blade stresses has been investigated. Using paper pulp I, paper pulp II, coated paper and Bristol paper various analyses have been made. In the analyses, according to changes to blade angles of 20, 22, 24, 26, 28 and 30°, changes have been observed in maximum principal stress, S1, minimum principal stress, S3 and von Mises stresses, SEQV. In conclusion; since Von Mises stresses and especially max. compressive stresses (min. principal stress, S3) occurred at the lowest level for paper pulp I, paper pulp II, coated paper and Bristol papers, it has been decided that for increased durability of the knife the critical blade angle in terms of abrasion/breakage of the blade should be 28 degrees rather than the more widely used angle of 24°. A blade angle below 22 degrees is not advised.},
issn = {0039-2480}, pages = {633-640}, doi = {},
url = {https://www.sv-jme.eu/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/}
}
Kurt, A.,Kose, E.,Sahinbaskan, T. 2009 August 55. The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 55:10
%A Kurt, Abdullah %A Kose, Erdogan %A Sahinbaskan, Turkun %D 2009 %T The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials %B 2009 %9 paper; blade; stress; ANSYS; %! The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials %K paper; blade; stress; ANSYS; %X In the printing sector knives (blades) are used during pre-printing, printing and post-printing. Therefore, paper type, blade angles, the sharpness of blades and applied pressure are all important factors in terms of cutting quality. In this study, during the cutting of different kinds of paper material, the effects of blade angle on blade stresses has been investigated. Using paper pulp I, paper pulp II, coated paper and Bristol paper various analyses have been made. In the analyses, according to changes to blade angles of 20, 22, 24, 26, 28 and 30°, changes have been observed in maximum principal stress, S1, minimum principal stress, S3 and von Mises stresses, SEQV. In conclusion; since Von Mises stresses and especially max. compressive stresses (min. principal stress, S3) occurred at the lowest level for paper pulp I, paper pulp II, coated paper and Bristol papers, it has been decided that for increased durability of the knife the critical blade angle in terms of abrasion/breakage of the blade should be 28 degrees rather than the more widely used angle of 24°. A blade angle below 22 degrees is not advised. %U https://www.sv-jme.eu/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/ %0 Journal Article %R %& 633 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 55 %N 10 %@ 0039-2480 %8 2017-08-21 %7 2017-08-21
Kurt, Abdullah, Erdogan Kose, & Turkun Sahinbaskan. "The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials." Strojniški vestnik - Journal of Mechanical Engineering [Online], 55.10 (2009): 633-640. Web. 20 Dec. 2024
TY - JOUR AU - Kurt, Abdullah AU - Kose, Erdogan AU - Sahinbaskan, Turkun PY - 2009 TI - The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - paper; blade; stress; ANSYS; N2 - In the printing sector knives (blades) are used during pre-printing, printing and post-printing. Therefore, paper type, blade angles, the sharpness of blades and applied pressure are all important factors in terms of cutting quality. In this study, during the cutting of different kinds of paper material, the effects of blade angle on blade stresses has been investigated. Using paper pulp I, paper pulp II, coated paper and Bristol paper various analyses have been made. In the analyses, according to changes to blade angles of 20, 22, 24, 26, 28 and 30°, changes have been observed in maximum principal stress, S1, minimum principal stress, S3 and von Mises stresses, SEQV. In conclusion; since Von Mises stresses and especially max. compressive stresses (min. principal stress, S3) occurred at the lowest level for paper pulp I, paper pulp II, coated paper and Bristol papers, it has been decided that for increased durability of the knife the critical blade angle in terms of abrasion/breakage of the blade should be 28 degrees rather than the more widely used angle of 24°. A blade angle below 22 degrees is not advised. UR - https://www.sv-jme.eu/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/
@article{{}{.},
author = {Kurt, A., Kose, E., Sahinbaskan, T.},
title = {The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {55},
number = {10},
year = {2009},
doi = {},
url = {https://www.sv-jme.eu/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/}
}
TY - JOUR AU - Kurt, Abdullah AU - Kose, Erdogan AU - Sahinbaskan, Turkun PY - 2017/08/21 TI - The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 55, No 10 (2009): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - paper, blade, stress, ANSYS, N2 - In the printing sector knives (blades) are used during pre-printing, printing and post-printing. Therefore, paper type, blade angles, the sharpness of blades and applied pressure are all important factors in terms of cutting quality. In this study, during the cutting of different kinds of paper material, the effects of blade angle on blade stresses has been investigated. Using paper pulp I, paper pulp II, coated paper and Bristol paper various analyses have been made. In the analyses, according to changes to blade angles of 20, 22, 24, 26, 28 and 30°, changes have been observed in maximum principal stress, S1, minimum principal stress, S3 and von Mises stresses, SEQV. In conclusion; since Von Mises stresses and especially max. compressive stresses (min. principal stress, S3) occurred at the lowest level for paper pulp I, paper pulp II, coated paper and Bristol papers, it has been decided that for increased durability of the knife the critical blade angle in terms of abrasion/breakage of the blade should be 28 degrees rather than the more widely used angle of 24°. A blade angle below 22 degrees is not advised. UR - https://www.sv-jme.eu/article/the-effects-of-blade-angle-on-blade-stresses-during-cutting-of-different-kinds-of-paper-materials/
Kurt, Abdullah, Kose, Erdogan, AND Sahinbaskan, Turkun. "The Effects of Blade Angle on Blade Stresses During Cutting of Different Kinds of Paper Materials" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 55 Number 10 (21 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 55(2009)10, 633-640
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In the printing sector knives (blades) are used during pre-printing, printing and post-printing. Therefore, paper type, blade angles, the sharpness of blades and applied pressure are all important factors in terms of cutting quality. In this study, during the cutting of different kinds of paper material, the effects of blade angle on blade stresses has been investigated. Using paper pulp I, paper pulp II, coated paper and Bristol paper various analyses have been made. In the analyses, according to changes to blade angles of 20, 22, 24, 26, 28 and 30°, changes have been observed in maximum principal stress, S1, minimum principal stress, S3 and von Mises stresses, SEQV. In conclusion; since Von Mises stresses and especially max. compressive stresses (min. principal stress, S3) occurred at the lowest level for paper pulp I, paper pulp II, coated paper and Bristol papers, it has been decided that for increased durability of the knife the critical blade angle in terms of abrasion/breakage of the blade should be 28 degrees rather than the more widely used angle of 24°. A blade angle below 22 degrees is not advised.