ROSA, Uroš ;NAGODE, Marko ;FAJDIGA, Matija . Evaluating thermo-mechanically loaded components using a strain-life approach. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 53, n.10, p. 605-620, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/evaluating-thermo-mechanically-loaded-components-using-a-strain-life-approach/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/.
Rosa, U., Nagode, M., & Fajdiga, M. (2007). Evaluating thermo-mechanically loaded components using a strain-life approach. Strojniški vestnik - Journal of Mechanical Engineering, 53(10), 605-620. doi:http://dx.doi.org/
@article{.,
author = {Uroš Rosa and Marko Nagode and Matija Fajdiga},
title = {Evaluating thermo-mechanically loaded components using a strain-life approach},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {53},
number = {10},
year = {2007},
keywords = {thermo-mechanical fatigue; damages; strain-life approach; finite element methods; },
abstract = {The strain-life approach is one of the most commonly used methods for evaluating component fatigue. In its application for thermo-mechanically load states and for modelling local temperature stress-strain states, we use a stress-controlled rheological spring-slider model with an operator of the Prandtl type, which makes it possible to model the elasto-plastic material properties. The approach is used to evaluate complex components in combination with the finite-element method (FEM). The described evaluation approach is classified as one of the non-unified procedures, where we can determine separately the stress-strain states and separately calculate the damage. For the damage calculation a Damage Calculation Program (DCP) was developed. It has the possibility to import the results acquired by linear or nonlinear FEM analysis. The critical areas are determined by using a deformation endurance curve and the Skelton approach. The material data on non-measured temperatures is interpolated with the linear or cubic Hermite method. The application of the developed model is shown on two standard-shaped test specimens for deformation control tests in a constant temperature field and for a combination of the random temperature history and the mechanical load. The temperature dependence of the Kp parameter used in the Neuber formula, for estimating the elasto-plastic stress-strain, states from the results of the linear FEM analysis is also included in the research. The described procedure enables a fast numerical validation with a random combination of temperature and mechanical load. },
issn = {0039-2480}, pages = {605-620}, doi = {},
url = {https://www.sv-jme.eu/article/evaluating-thermo-mechanically-loaded-components-using-a-strain-life-approach/}
}
Rosa, U.,Nagode, M.,Fajdiga, M. 2007 August 53. Evaluating thermo-mechanically loaded components using a strain-life approach. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 53:10
%A Rosa, Uroš %A Nagode, Marko %A Fajdiga, Matija %D 2007 %T Evaluating thermo-mechanically loaded components using a strain-life approach %B 2007 %9 thermo-mechanical fatigue; damages; strain-life approach; finite element methods; %! Evaluating thermo-mechanically loaded components using a strain-life approach %K thermo-mechanical fatigue; damages; strain-life approach; finite element methods; %X The strain-life approach is one of the most commonly used methods for evaluating component fatigue. In its application for thermo-mechanically load states and for modelling local temperature stress-strain states, we use a stress-controlled rheological spring-slider model with an operator of the Prandtl type, which makes it possible to model the elasto-plastic material properties. The approach is used to evaluate complex components in combination with the finite-element method (FEM). The described evaluation approach is classified as one of the non-unified procedures, where we can determine separately the stress-strain states and separately calculate the damage. For the damage calculation a Damage Calculation Program (DCP) was developed. It has the possibility to import the results acquired by linear or nonlinear FEM analysis. The critical areas are determined by using a deformation endurance curve and the Skelton approach. The material data on non-measured temperatures is interpolated with the linear or cubic Hermite method. The application of the developed model is shown on two standard-shaped test specimens for deformation control tests in a constant temperature field and for a combination of the random temperature history and the mechanical load. The temperature dependence of the Kp parameter used in the Neuber formula, for estimating the elasto-plastic stress-strain, states from the results of the linear FEM analysis is also included in the research. The described procedure enables a fast numerical validation with a random combination of temperature and mechanical load. %U https://www.sv-jme.eu/article/evaluating-thermo-mechanically-loaded-components-using-a-strain-life-approach/ %0 Journal Article %R %& 605 %P 16 %J Strojniški vestnik - Journal of Mechanical Engineering %V 53 %N 10 %@ 0039-2480 %8 2017-08-18 %7 2017-08-18
Rosa, Uroš, Marko Nagode, & Matija Fajdiga. "Evaluating thermo-mechanically loaded components using a strain-life approach." Strojniški vestnik - Journal of Mechanical Engineering [Online], 53.10 (2007): 605-620. Web. 20 Dec. 2024
TY - JOUR AU - Rosa, Uroš AU - Nagode, Marko AU - Fajdiga, Matija PY - 2007 TI - Evaluating thermo-mechanically loaded components using a strain-life approach JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - thermo-mechanical fatigue; damages; strain-life approach; finite element methods; N2 - The strain-life approach is one of the most commonly used methods for evaluating component fatigue. In its application for thermo-mechanically load states and for modelling local temperature stress-strain states, we use a stress-controlled rheological spring-slider model with an operator of the Prandtl type, which makes it possible to model the elasto-plastic material properties. The approach is used to evaluate complex components in combination with the finite-element method (FEM). The described evaluation approach is classified as one of the non-unified procedures, where we can determine separately the stress-strain states and separately calculate the damage. For the damage calculation a Damage Calculation Program (DCP) was developed. It has the possibility to import the results acquired by linear or nonlinear FEM analysis. The critical areas are determined by using a deformation endurance curve and the Skelton approach. The material data on non-measured temperatures is interpolated with the linear or cubic Hermite method. The application of the developed model is shown on two standard-shaped test specimens for deformation control tests in a constant temperature field and for a combination of the random temperature history and the mechanical load. The temperature dependence of the Kp parameter used in the Neuber formula, for estimating the elasto-plastic stress-strain, states from the results of the linear FEM analysis is also included in the research. The described procedure enables a fast numerical validation with a random combination of temperature and mechanical load. UR - https://www.sv-jme.eu/article/evaluating-thermo-mechanically-loaded-components-using-a-strain-life-approach/
@article{{}{.},
author = {Rosa, U., Nagode, M., Fajdiga, M.},
title = {Evaluating thermo-mechanically loaded components using a strain-life approach},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {53},
number = {10},
year = {2007},
doi = {},
url = {https://www.sv-jme.eu/article/evaluating-thermo-mechanically-loaded-components-using-a-strain-life-approach/}
}
TY - JOUR AU - Rosa, Uroš AU - Nagode, Marko AU - Fajdiga, Matija PY - 2017/08/18 TI - Evaluating thermo-mechanically loaded components using a strain-life approach JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 53, No 10 (2007): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - thermo-mechanical fatigue, damages, strain-life approach, finite element methods, N2 - The strain-life approach is one of the most commonly used methods for evaluating component fatigue. In its application for thermo-mechanically load states and for modelling local temperature stress-strain states, we use a stress-controlled rheological spring-slider model with an operator of the Prandtl type, which makes it possible to model the elasto-plastic material properties. The approach is used to evaluate complex components in combination with the finite-element method (FEM). The described evaluation approach is classified as one of the non-unified procedures, where we can determine separately the stress-strain states and separately calculate the damage. For the damage calculation a Damage Calculation Program (DCP) was developed. It has the possibility to import the results acquired by linear or nonlinear FEM analysis. The critical areas are determined by using a deformation endurance curve and the Skelton approach. The material data on non-measured temperatures is interpolated with the linear or cubic Hermite method. The application of the developed model is shown on two standard-shaped test specimens for deformation control tests in a constant temperature field and for a combination of the random temperature history and the mechanical load. The temperature dependence of the Kp parameter used in the Neuber formula, for estimating the elasto-plastic stress-strain, states from the results of the linear FEM analysis is also included in the research. The described procedure enables a fast numerical validation with a random combination of temperature and mechanical load. UR - https://www.sv-jme.eu/article/evaluating-thermo-mechanically-loaded-components-using-a-strain-life-approach/
Rosa, Uroš, Nagode, Marko, AND Fajdiga, Matija. "Evaluating thermo-mechanically loaded components using a strain-life approach" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 53 Number 10 (18 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 53(2007)10, 605-620
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The strain-life approach is one of the most commonly used methods for evaluating component fatigue. In its application for thermo-mechanically load states and for modelling local temperature stress-strain states, we use a stress-controlled rheological spring-slider model with an operator of the Prandtl type, which makes it possible to model the elasto-plastic material properties. The approach is used to evaluate complex components in combination with the finite-element method (FEM). The described evaluation approach is classified as one of the non-unified procedures, where we can determine separately the stress-strain states and separately calculate the damage. For the damage calculation a Damage Calculation Program (DCP) was developed. It has the possibility to import the results acquired by linear or nonlinear FEM analysis. The critical areas are determined by using a deformation endurance curve and the Skelton approach. The material data on non-measured temperatures is interpolated with the linear or cubic Hermite method. The application of the developed model is shown on two standard-shaped test specimens for deformation control tests in a constant temperature field and for a combination of the random temperature history and the mechanical load. The temperature dependence of the Kp parameter used in the Neuber formula, for estimating the elasto-plastic stress-strain, states from the results of the linear FEM analysis is also included in the research. The described procedure enables a fast numerical validation with a random combination of temperature and mechanical load.