PETERKA, Jozef . A New Approach to Calculating the Arithmetical Mean Deviation of a Profile during Copy Milling. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 50, n.12, p. 594-597, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/a-new-approach-to-calculating-the-arithmetical-mean-deviation-of-a-profile-during-copy-milling/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/.
Peterka, J. (2004). A New Approach to Calculating the Arithmetical Mean Deviation of a Profile during Copy Milling. Strojniški vestnik - Journal of Mechanical Engineering, 50(12), 594-597. doi:http://dx.doi.org/
@article{., author = {Jozef Peterka}, title = {A New Approach to Calculating the Arithmetical Mean Deviation of a Profile during Copy Milling}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {50}, number = {12}, year = {2004}, keywords = {copy milling; surface roughness; finishing; free form surface; }, abstract = {Surface roughness as a result of milling with a cylindrical ball-end cutter is determined in the technical literature, as it is in university textbooks, relatively infrequently. The problem is usually simplified, which means simplified relations for the calculations of theoretical surface roughness during copy milling with cylindrical ball-end cutters are introduced: the calculation of parameter Rz, and the maximum height of the undulation profile. In this contribution an improved calculation, not only for parameter Rz , but also for parameter Ra, the arithmetical mean deviation of the profile, is presented. The paper presents new equations for the direct calculation of the arithmetical mean deviation of the transverse and longitudinal profiles during copy milling on a plane (face) surface and an oblique surface.}, issn = {0039-2480}, pages = {594-597}, doi = {}, url = {https://www.sv-jme.eu/article/a-new-approach-to-calculating-the-arithmetical-mean-deviation-of-a-profile-during-copy-milling/} }
Peterka, J. 2004 July 50. A New Approach to Calculating the Arithmetical Mean Deviation of a Profile during Copy Milling. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 50:12
%A Peterka, Jozef %D 2004 %T A New Approach to Calculating the Arithmetical Mean Deviation of a Profile during Copy Milling %B 2004 %9 copy milling; surface roughness; finishing; free form surface; %! A New Approach to Calculating the Arithmetical Mean Deviation of a Profile during Copy Milling %K copy milling; surface roughness; finishing; free form surface; %X Surface roughness as a result of milling with a cylindrical ball-end cutter is determined in the technical literature, as it is in university textbooks, relatively infrequently. The problem is usually simplified, which means simplified relations for the calculations of theoretical surface roughness during copy milling with cylindrical ball-end cutters are introduced: the calculation of parameter Rz, and the maximum height of the undulation profile. In this contribution an improved calculation, not only for parameter Rz , but also for parameter Ra, the arithmetical mean deviation of the profile, is presented. The paper presents new equations for the direct calculation of the arithmetical mean deviation of the transverse and longitudinal profiles during copy milling on a plane (face) surface and an oblique surface. %U https://www.sv-jme.eu/article/a-new-approach-to-calculating-the-arithmetical-mean-deviation-of-a-profile-during-copy-milling/ %0 Journal Article %R %& 594 %P 4 %J Strojniški vestnik - Journal of Mechanical Engineering %V 50 %N 12 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Peterka, Jozef. "A New Approach to Calculating the Arithmetical Mean Deviation of a Profile during Copy Milling." Strojniški vestnik - Journal of Mechanical Engineering [Online], 50.12 (2004): 594-597. Web. 01 Sep. 2024
TY - JOUR AU - Peterka, Jozef PY - 2004 TI - A New Approach to Calculating the Arithmetical Mean Deviation of a Profile during Copy Milling JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - copy milling; surface roughness; finishing; free form surface; N2 - Surface roughness as a result of milling with a cylindrical ball-end cutter is determined in the technical literature, as it is in university textbooks, relatively infrequently. The problem is usually simplified, which means simplified relations for the calculations of theoretical surface roughness during copy milling with cylindrical ball-end cutters are introduced: the calculation of parameter Rz, and the maximum height of the undulation profile. In this contribution an improved calculation, not only for parameter Rz , but also for parameter Ra, the arithmetical mean deviation of the profile, is presented. The paper presents new equations for the direct calculation of the arithmetical mean deviation of the transverse and longitudinal profiles during copy milling on a plane (face) surface and an oblique surface. UR - https://www.sv-jme.eu/article/a-new-approach-to-calculating-the-arithmetical-mean-deviation-of-a-profile-during-copy-milling/
@article{{}{.}, author = {Peterka, J.}, title = {A New Approach to Calculating the Arithmetical Mean Deviation of a Profile during Copy Milling}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {50}, number = {12}, year = {2004}, doi = {}, url = {https://www.sv-jme.eu/article/a-new-approach-to-calculating-the-arithmetical-mean-deviation-of-a-profile-during-copy-milling/} }
TY - JOUR AU - Peterka, Jozef PY - 2017/07/07 TI - A New Approach to Calculating the Arithmetical Mean Deviation of a Profile during Copy Milling JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 50, No 12 (2004): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - copy milling, surface roughness, finishing, free form surface, N2 - Surface roughness as a result of milling with a cylindrical ball-end cutter is determined in the technical literature, as it is in university textbooks, relatively infrequently. The problem is usually simplified, which means simplified relations for the calculations of theoretical surface roughness during copy milling with cylindrical ball-end cutters are introduced: the calculation of parameter Rz, and the maximum height of the undulation profile. In this contribution an improved calculation, not only for parameter Rz , but also for parameter Ra, the arithmetical mean deviation of the profile, is presented. The paper presents new equations for the direct calculation of the arithmetical mean deviation of the transverse and longitudinal profiles during copy milling on a plane (face) surface and an oblique surface. UR - https://www.sv-jme.eu/article/a-new-approach-to-calculating-the-arithmetical-mean-deviation-of-a-profile-during-copy-milling/
Peterka, Jozef"A New Approach to Calculating the Arithmetical Mean Deviation of a Profile during Copy Milling" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 50 Number 12 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 50(2004)12, 594-597
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Surface roughness as a result of milling with a cylindrical ball-end cutter is determined in the technical literature, as it is in university textbooks, relatively infrequently. The problem is usually simplified, which means simplified relations for the calculations of theoretical surface roughness during copy milling with cylindrical ball-end cutters are introduced: the calculation of parameter Rz, and the maximum height of the undulation profile. In this contribution an improved calculation, not only for parameter Rz , but also for parameter Ra, the arithmetical mean deviation of the profile, is presented. The paper presents new equations for the direct calculation of the arithmetical mean deviation of the transverse and longitudinal profiles during copy milling on a plane (face) surface and an oblique surface.