HACE, Aleš ;POLIČ, Aleš ;JEZERNIK, Karel . An Advanced Mechatronic Approach to Open Machine-Control Design. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 50, n.10, p. 469-486, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/an-advanced-mechatronic-approach-to-open-machine-control-design/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/.
Hace, A., Polič, A., & Jezernik, K. (2004). An Advanced Mechatronic Approach to Open Machine-Control Design. Strojniški vestnik - Journal of Mechanical Engineering, 50(10), 469-486. doi:http://dx.doi.org/
@article{., author = {Aleš Hace and Aleš Polič and Karel Jezernik}, title = {An Advanced Mechatronic Approach to Open Machine-Control Design}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {50}, number = {10}, year = {2004}, keywords = {factory automation; CNC-PLC; real-time operating systems; embedded systems; Petri nets; }, abstract = {This paper addresses the field of factory automation within the scope of flexible production systems. It presents a new mechatronic approach to machine control, which introduces an integrated and interdisciplinary method to holistic machine design. The mechanical, electronic and informatics aspects of a production system are involved synergistically. The paper describes a distributed control architecture for a cutting machine. In addition, it applies a new approach to the development of control functions. The controller was built on the open QNX real-time operating system for the PC architecture. The commonly accepted graphical-user-interface environment of Microsoft Windows serves as the front-end of the HMI. The controller and the HMI are interconnected by an Ethernet TCP/IP link that is extended to the office-level of factory automation. A new method for describing logic control functions introduces a modular logic controller that is specified and formalized using a matrix representation of Petri nets. It allows a system simulation and an off-line analysis that can significantly shorten a machine control development cycle. The new method is compatible with standard programming languages for logic controllers. Furthermore, it represents a basis for the design of more efficient, reliable, and user-friendly machine control.}, issn = {0039-2480}, pages = {469-486}, doi = {}, url = {https://www.sv-jme.eu/article/an-advanced-mechatronic-approach-to-open-machine-control-design/} }
Hace, A.,Polič, A.,Jezernik, K. 2004 July 50. An Advanced Mechatronic Approach to Open Machine-Control Design. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 50:10
%A Hace, Aleš %A Polič, Aleš %A Jezernik, Karel %D 2004 %T An Advanced Mechatronic Approach to Open Machine-Control Design %B 2004 %9 factory automation; CNC-PLC; real-time operating systems; embedded systems; Petri nets; %! An Advanced Mechatronic Approach to Open Machine-Control Design %K factory automation; CNC-PLC; real-time operating systems; embedded systems; Petri nets; %X This paper addresses the field of factory automation within the scope of flexible production systems. It presents a new mechatronic approach to machine control, which introduces an integrated and interdisciplinary method to holistic machine design. The mechanical, electronic and informatics aspects of a production system are involved synergistically. The paper describes a distributed control architecture for a cutting machine. In addition, it applies a new approach to the development of control functions. The controller was built on the open QNX real-time operating system for the PC architecture. The commonly accepted graphical-user-interface environment of Microsoft Windows serves as the front-end of the HMI. The controller and the HMI are interconnected by an Ethernet TCP/IP link that is extended to the office-level of factory automation. A new method for describing logic control functions introduces a modular logic controller that is specified and formalized using a matrix representation of Petri nets. It allows a system simulation and an off-line analysis that can significantly shorten a machine control development cycle. The new method is compatible with standard programming languages for logic controllers. Furthermore, it represents a basis for the design of more efficient, reliable, and user-friendly machine control. %U https://www.sv-jme.eu/article/an-advanced-mechatronic-approach-to-open-machine-control-design/ %0 Journal Article %R %& 469 %P 18 %J Strojniški vestnik - Journal of Mechanical Engineering %V 50 %N 10 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Hace, Aleš, Aleš Polič, & Karel Jezernik. "An Advanced Mechatronic Approach to Open Machine-Control Design." Strojniški vestnik - Journal of Mechanical Engineering [Online], 50.10 (2004): 469-486. Web. 01 Sep. 2024
TY - JOUR AU - Hace, Aleš AU - Polič, Aleš AU - Jezernik, Karel PY - 2004 TI - An Advanced Mechatronic Approach to Open Machine-Control Design JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - factory automation; CNC-PLC; real-time operating systems; embedded systems; Petri nets; N2 - This paper addresses the field of factory automation within the scope of flexible production systems. It presents a new mechatronic approach to machine control, which introduces an integrated and interdisciplinary method to holistic machine design. The mechanical, electronic and informatics aspects of a production system are involved synergistically. The paper describes a distributed control architecture for a cutting machine. In addition, it applies a new approach to the development of control functions. The controller was built on the open QNX real-time operating system for the PC architecture. The commonly accepted graphical-user-interface environment of Microsoft Windows serves as the front-end of the HMI. The controller and the HMI are interconnected by an Ethernet TCP/IP link that is extended to the office-level of factory automation. A new method for describing logic control functions introduces a modular logic controller that is specified and formalized using a matrix representation of Petri nets. It allows a system simulation and an off-line analysis that can significantly shorten a machine control development cycle. The new method is compatible with standard programming languages for logic controllers. Furthermore, it represents a basis for the design of more efficient, reliable, and user-friendly machine control. UR - https://www.sv-jme.eu/article/an-advanced-mechatronic-approach-to-open-machine-control-design/
@article{{}{.}, author = {Hace, A., Polič, A., Jezernik, K.}, title = {An Advanced Mechatronic Approach to Open Machine-Control Design}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {50}, number = {10}, year = {2004}, doi = {}, url = {https://www.sv-jme.eu/article/an-advanced-mechatronic-approach-to-open-machine-control-design/} }
TY - JOUR AU - Hace, Aleš AU - Polič, Aleš AU - Jezernik, Karel PY - 2017/07/07 TI - An Advanced Mechatronic Approach to Open Machine-Control Design JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 50, No 10 (2004): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - factory automation, CNC-PLC, real-time operating systems, embedded systems, Petri nets, N2 - This paper addresses the field of factory automation within the scope of flexible production systems. It presents a new mechatronic approach to machine control, which introduces an integrated and interdisciplinary method to holistic machine design. The mechanical, electronic and informatics aspects of a production system are involved synergistically. The paper describes a distributed control architecture for a cutting machine. In addition, it applies a new approach to the development of control functions. The controller was built on the open QNX real-time operating system for the PC architecture. The commonly accepted graphical-user-interface environment of Microsoft Windows serves as the front-end of the HMI. The controller and the HMI are interconnected by an Ethernet TCP/IP link that is extended to the office-level of factory automation. A new method for describing logic control functions introduces a modular logic controller that is specified and formalized using a matrix representation of Petri nets. It allows a system simulation and an off-line analysis that can significantly shorten a machine control development cycle. The new method is compatible with standard programming languages for logic controllers. Furthermore, it represents a basis for the design of more efficient, reliable, and user-friendly machine control. UR - https://www.sv-jme.eu/article/an-advanced-mechatronic-approach-to-open-machine-control-design/
Hace, Aleš, Polič, Aleš, AND Jezernik, Karel. "An Advanced Mechatronic Approach to Open Machine-Control Design" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 50 Number 10 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 50(2004)10, 469-486
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper addresses the field of factory automation within the scope of flexible production systems. It presents a new mechatronic approach to machine control, which introduces an integrated and interdisciplinary method to holistic machine design. The mechanical, electronic and informatics aspects of a production system are involved synergistically. The paper describes a distributed control architecture for a cutting machine. In addition, it applies a new approach to the development of control functions. The controller was built on the open QNX real-time operating system for the PC architecture. The commonly accepted graphical-user-interface environment of Microsoft Windows serves as the front-end of the HMI. The controller and the HMI are interconnected by an Ethernet TCP/IP link that is extended to the office-level of factory automation. A new method for describing logic control functions introduces a modular logic controller that is specified and formalized using a matrix representation of Petri nets. It allows a system simulation and an off-line analysis that can significantly shorten a machine control development cycle. The new method is compatible with standard programming languages for logic controllers. Furthermore, it represents a basis for the design of more efficient, reliable, and user-friendly machine control.