KRAMAR, Davorin ;JUNKAR, Miha . The Development of a Software Tool for the Selection of Contour-Cutting Processes. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 49, n.6, p. 346-365, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/the-development-of-a-software-tool-for-the-selection-of-contour-cutting-processes/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/.
Kramar, D., & Junkar, M. (2003). The Development of a Software Tool for the Selection of Contour-Cutting Processes. Strojniški vestnik - Journal of Mechanical Engineering, 49(6), 346-365. doi:http://dx.doi.org/
@article{., author = {Davorin Kramar and Miha Junkar}, title = {The Development of a Software Tool for the Selection of Contour-Cutting Processes}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {49}, number = {6}, year = {2003}, keywords = {cutting processes; proces selection; contour cutting; software tools; software development; }, abstract = {This paper describes software for the selection of a manufacturing process in the design of a single mechanical part. A systematic selection procedure for a specific manufacturing task contour cutting is presented. The developed software uses general data on process capabilities and incorporates process and cost modeling into the selection procedure. The machinability of a certain material is established by the relationships between the behaviour of a workpiece material during and after processing and by the preset process parameters. Complex interactions are interpreted in the sense of empirical rules derived from experimental and specific, material-process, database curve fits. In our study such empirical models were used for discriminating between processing options, for optimum co-selection of materials and processes. Since many processing parameters are involved, selection of an optimum set of parameters offers the opportunity for a significant cost saving. The results provide the technologist and the designer with feedback on the likely influence of processing, on the viability and cost of design, as well as indicating trial processing parameters.}, issn = {0039-2480}, pages = {346-365}, doi = {}, url = {https://www.sv-jme.eu/article/the-development-of-a-software-tool-for-the-selection-of-contour-cutting-processes/} }
Kramar, D.,Junkar, M. 2003 July 49. The Development of a Software Tool for the Selection of Contour-Cutting Processes. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 49:6
%A Kramar, Davorin %A Junkar, Miha %D 2003 %T The Development of a Software Tool for the Selection of Contour-Cutting Processes %B 2003 %9 cutting processes; proces selection; contour cutting; software tools; software development; %! The Development of a Software Tool for the Selection of Contour-Cutting Processes %K cutting processes; proces selection; contour cutting; software tools; software development; %X This paper describes software for the selection of a manufacturing process in the design of a single mechanical part. A systematic selection procedure for a specific manufacturing task contour cutting is presented. The developed software uses general data on process capabilities and incorporates process and cost modeling into the selection procedure. The machinability of a certain material is established by the relationships between the behaviour of a workpiece material during and after processing and by the preset process parameters. Complex interactions are interpreted in the sense of empirical rules derived from experimental and specific, material-process, database curve fits. In our study such empirical models were used for discriminating between processing options, for optimum co-selection of materials and processes. Since many processing parameters are involved, selection of an optimum set of parameters offers the opportunity for a significant cost saving. The results provide the technologist and the designer with feedback on the likely influence of processing, on the viability and cost of design, as well as indicating trial processing parameters. %U https://www.sv-jme.eu/article/the-development-of-a-software-tool-for-the-selection-of-contour-cutting-processes/ %0 Journal Article %R %& 346 %P 20 %J Strojniški vestnik - Journal of Mechanical Engineering %V 49 %N 6 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Kramar, Davorin, & Miha Junkar. "The Development of a Software Tool for the Selection of Contour-Cutting Processes." Strojniški vestnik - Journal of Mechanical Engineering [Online], 49.6 (2003): 346-365. Web. 01 Sep. 2024
TY - JOUR AU - Kramar, Davorin AU - Junkar, Miha PY - 2003 TI - The Development of a Software Tool for the Selection of Contour-Cutting Processes JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - cutting processes; proces selection; contour cutting; software tools; software development; N2 - This paper describes software for the selection of a manufacturing process in the design of a single mechanical part. A systematic selection procedure for a specific manufacturing task contour cutting is presented. The developed software uses general data on process capabilities and incorporates process and cost modeling into the selection procedure. The machinability of a certain material is established by the relationships between the behaviour of a workpiece material during and after processing and by the preset process parameters. Complex interactions are interpreted in the sense of empirical rules derived from experimental and specific, material-process, database curve fits. In our study such empirical models were used for discriminating between processing options, for optimum co-selection of materials and processes. Since many processing parameters are involved, selection of an optimum set of parameters offers the opportunity for a significant cost saving. The results provide the technologist and the designer with feedback on the likely influence of processing, on the viability and cost of design, as well as indicating trial processing parameters. UR - https://www.sv-jme.eu/article/the-development-of-a-software-tool-for-the-selection-of-contour-cutting-processes/
@article{{}{.}, author = {Kramar, D., Junkar, M.}, title = {The Development of a Software Tool for the Selection of Contour-Cutting Processes}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {49}, number = {6}, year = {2003}, doi = {}, url = {https://www.sv-jme.eu/article/the-development-of-a-software-tool-for-the-selection-of-contour-cutting-processes/} }
TY - JOUR AU - Kramar, Davorin AU - Junkar, Miha PY - 2017/07/07 TI - The Development of a Software Tool for the Selection of Contour-Cutting Processes JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 49, No 6 (2003): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - cutting processes, proces selection, contour cutting, software tools, software development, N2 - This paper describes software for the selection of a manufacturing process in the design of a single mechanical part. A systematic selection procedure for a specific manufacturing task contour cutting is presented. The developed software uses general data on process capabilities and incorporates process and cost modeling into the selection procedure. The machinability of a certain material is established by the relationships between the behaviour of a workpiece material during and after processing and by the preset process parameters. Complex interactions are interpreted in the sense of empirical rules derived from experimental and specific, material-process, database curve fits. In our study such empirical models were used for discriminating between processing options, for optimum co-selection of materials and processes. Since many processing parameters are involved, selection of an optimum set of parameters offers the opportunity for a significant cost saving. The results provide the technologist and the designer with feedback on the likely influence of processing, on the viability and cost of design, as well as indicating trial processing parameters. UR - https://www.sv-jme.eu/article/the-development-of-a-software-tool-for-the-selection-of-contour-cutting-processes/
Kramar, Davorin, AND Junkar, Miha. "The Development of a Software Tool for the Selection of Contour-Cutting Processes" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 49 Number 6 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 49(2003)6, 346-365
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper describes software for the selection of a manufacturing process in the design of a single mechanical part. A systematic selection procedure for a specific manufacturing task contour cutting is presented. The developed software uses general data on process capabilities and incorporates process and cost modeling into the selection procedure. The machinability of a certain material is established by the relationships between the behaviour of a workpiece material during and after processing and by the preset process parameters. Complex interactions are interpreted in the sense of empirical rules derived from experimental and specific, material-process, database curve fits. In our study such empirical models were used for discriminating between processing options, for optimum co-selection of materials and processes. Since many processing parameters are involved, selection of an optimum set of parameters offers the opportunity for a significant cost saving. The results provide the technologist and the designer with feedback on the likely influence of processing, on the viability and cost of design, as well as indicating trial processing parameters.