WECKENMANN, Albert ;GEBAUER, Uwe . Statistical Process Control In Future Production. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 44, n.1-2, p. 4-18, november 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/statistical-process-control-in-future-production/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/.
Weckenmann, A., & Gebauer, U. (1998). Statistical Process Control In Future Production. Strojniški vestnik - Journal of Mechanical Engineering, 44(1-2), 4-18. doi:http://dx.doi.org/
@article{., author = {Albert Weckenmann and Uwe Gebauer}, title = {Statistical Process Control In Future Production}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {44}, number = {1-2}, year = {1998}, keywords = {process control; SPC; Precontrol; statistical control chart; }, abstract = {The statistical process control (SPC) is limited to the analysis o f processes and especially to the use of Shewhart-charts to control process results in production. This paper shows, that the SPC-model has limits. These could be broken through if SPC expands to a model of process control engineering. SPC should begin with planning the process control and finally close the process control loop with correction parameters. The future demands for production, for example small defect rates in a parts per million area or small lots, need more to be systematic for the choice and construction of control charts. But also the technical modification of control charts may improve the efficiency of charts. An alternative will be discussed with the example of the workman convenient chart Precontrol.}, issn = {0039-2480}, pages = {4-18}, doi = {}, url = {https://www.sv-jme.eu/article/statistical-process-control-in-future-production/} }
Weckenmann, A.,Gebauer, U. 1998 November 44. Statistical Process Control In Future Production. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 44:1-2
%A Weckenmann, Albert %A Gebauer, Uwe %D 1998 %T Statistical Process Control In Future Production %B 1998 %9 process control; SPC; Precontrol; statistical control chart; %! Statistical Process Control In Future Production %K process control; SPC; Precontrol; statistical control chart; %X The statistical process control (SPC) is limited to the analysis o f processes and especially to the use of Shewhart-charts to control process results in production. This paper shows, that the SPC-model has limits. These could be broken through if SPC expands to a model of process control engineering. SPC should begin with planning the process control and finally close the process control loop with correction parameters. The future demands for production, for example small defect rates in a parts per million area or small lots, need more to be systematic for the choice and construction of control charts. But also the technical modification of control charts may improve the efficiency of charts. An alternative will be discussed with the example of the workman convenient chart Precontrol. %U https://www.sv-jme.eu/article/statistical-process-control-in-future-production/ %0 Journal Article %R %& 4 %P 15 %J Strojniški vestnik - Journal of Mechanical Engineering %V 44 %N 1-2 %@ 0039-2480 %8 2017-11-11 %7 2017-11-11
Weckenmann, Albert, & Uwe Gebauer. "Statistical Process Control In Future Production." Strojniški vestnik - Journal of Mechanical Engineering [Online], 44.1-2 (1998): 4-18. Web. 01 Sep. 2024
TY - JOUR AU - Weckenmann, Albert AU - Gebauer, Uwe PY - 1998 TI - Statistical Process Control In Future Production JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - process control; SPC; Precontrol; statistical control chart; N2 - The statistical process control (SPC) is limited to the analysis o f processes and especially to the use of Shewhart-charts to control process results in production. This paper shows, that the SPC-model has limits. These could be broken through if SPC expands to a model of process control engineering. SPC should begin with planning the process control and finally close the process control loop with correction parameters. The future demands for production, for example small defect rates in a parts per million area or small lots, need more to be systematic for the choice and construction of control charts. But also the technical modification of control charts may improve the efficiency of charts. An alternative will be discussed with the example of the workman convenient chart Precontrol. UR - https://www.sv-jme.eu/article/statistical-process-control-in-future-production/
@article{{}{.}, author = {Weckenmann, A., Gebauer, U.}, title = {Statistical Process Control In Future Production}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {44}, number = {1-2}, year = {1998}, doi = {}, url = {https://www.sv-jme.eu/article/statistical-process-control-in-future-production/} }
TY - JOUR AU - Weckenmann, Albert AU - Gebauer, Uwe PY - 2017/11/11 TI - Statistical Process Control In Future Production JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 44, No 1-2 (1998): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - process control, SPC, Precontrol, statistical control chart, N2 - The statistical process control (SPC) is limited to the analysis o f processes and especially to the use of Shewhart-charts to control process results in production. This paper shows, that the SPC-model has limits. These could be broken through if SPC expands to a model of process control engineering. SPC should begin with planning the process control and finally close the process control loop with correction parameters. The future demands for production, for example small defect rates in a parts per million area or small lots, need more to be systematic for the choice and construction of control charts. But also the technical modification of control charts may improve the efficiency of charts. An alternative will be discussed with the example of the workman convenient chart Precontrol. UR - https://www.sv-jme.eu/article/statistical-process-control-in-future-production/
Weckenmann, Albert, AND Gebauer, Uwe. "Statistical Process Control In Future Production" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 44 Number 1-2 (11 November 2017)
Strojniški vestnik - Journal of Mechanical Engineering 44(1998)1-2, 4-18
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The statistical process control (SPC) is limited to the analysis o f processes and especially to the use of Shewhart-charts to control process results in production. This paper shows, that the SPC-model has limits. These could be broken through if SPC expands to a model of process control engineering. SPC should begin with planning the process control and finally close the process control loop with correction parameters. The future demands for production, for example small defect rates in a parts per million area or small lots, need more to be systematic for the choice and construction of control charts. But also the technical modification of control charts may improve the efficiency of charts. An alternative will be discussed with the example of the workman convenient chart Precontrol.