MEDIČ, Marjan ;HLEBANJA, Jože . Characteristics of Wood Planing with an Obliquely Positioned Cylindrical Spindle and Its Effects on the Generated Surface. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 41, n.9-10, p. 295-310, november 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/characteristics-of-wood-planing-with-an-obliquely-positioned-cylindrical-spindle-and-its-effects-on-the-generated-surface/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/.
Medič, M., & Hlebanja, J. (1995). Characteristics of Wood Planing with an Obliquely Positioned Cylindrical Spindle and Its Effects on the Generated Surface. Strojniški vestnik - Journal of Mechanical Engineering, 41(9-10), 295-310. doi:http://dx.doi.org/
@article{.,
author = {Marjan Medič and Jože Hlebanja},
title = {Characteristics of Wood Planing with an Obliquely Positioned Cylindrical Spindle and Its Effects on the Generated Surface},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {41},
number = {9-10},
year = {1995},
keywords = {Wood Planing; Obliquely Positioned Cylindrical Spindle; Effects; Generated Surface; },
abstract = {Wood planing, by principle of operation, is circumferential contour milling with a cylindrical spindle. In the wood working industry, it is one of the conventional procedures for machining flat surfaces. The aim of this research was to study the characteristics of cutting when the feeding of the workpiece runs obliquely to the axis of the planing spindle. The research investigation studied the influence of the planing spindle angle of obliquity on the geometry of the generated surface and chip. Special attention was devoted to the effects of eccentricity of the planing spindle on the shape of the generated surface. The calculated geometry is compared to experimentally measured values after machining two different kinds of wood. The measured generated surface profiles have a strongly expressed periodicity. In the given machining conditions, the wave length and the amplitude of this periodicity are to a large extent defined by the path of the cutting edge through the workpiece. In addition to this most influential frequency, the shape of the generated profile is defined also by a random effect as a result of the anatomy characteristics of a given wood structure.},
issn = {0039-2480}, pages = {295-310}, doi = {},
url = {https://www.sv-jme.eu/article/characteristics-of-wood-planing-with-an-obliquely-positioned-cylindrical-spindle-and-its-effects-on-the-generated-surface/}
}
Medič, M.,Hlebanja, J. 1995 November 41. Characteristics of Wood Planing with an Obliquely Positioned Cylindrical Spindle and Its Effects on the Generated Surface. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 41:9-10
%A Medič, Marjan %A Hlebanja, Jože %D 1995 %T Characteristics of Wood Planing with an Obliquely Positioned Cylindrical Spindle and Its Effects on the Generated Surface %B 1995 %9 Wood Planing; Obliquely Positioned Cylindrical Spindle; Effects; Generated Surface; %! Characteristics of Wood Planing with an Obliquely Positioned Cylindrical Spindle and Its Effects on the Generated Surface %K Wood Planing; Obliquely Positioned Cylindrical Spindle; Effects; Generated Surface; %X Wood planing, by principle of operation, is circumferential contour milling with a cylindrical spindle. In the wood working industry, it is one of the conventional procedures for machining flat surfaces. The aim of this research was to study the characteristics of cutting when the feeding of the workpiece runs obliquely to the axis of the planing spindle. The research investigation studied the influence of the planing spindle angle of obliquity on the geometry of the generated surface and chip. Special attention was devoted to the effects of eccentricity of the planing spindle on the shape of the generated surface. The calculated geometry is compared to experimentally measured values after machining two different kinds of wood. The measured generated surface profiles have a strongly expressed periodicity. In the given machining conditions, the wave length and the amplitude of this periodicity are to a large extent defined by the path of the cutting edge through the workpiece. In addition to this most influential frequency, the shape of the generated profile is defined also by a random effect as a result of the anatomy characteristics of a given wood structure. %U https://www.sv-jme.eu/article/characteristics-of-wood-planing-with-an-obliquely-positioned-cylindrical-spindle-and-its-effects-on-the-generated-surface/ %0 Journal Article %R %& 295 %P 16 %J Strojniški vestnik - Journal of Mechanical Engineering %V 41 %N 9-10 %@ 0039-2480 %8 2017-11-11 %7 2017-11-11
Medič, Marjan, & Jože Hlebanja. "Characteristics of Wood Planing with an Obliquely Positioned Cylindrical Spindle and Its Effects on the Generated Surface." Strojniški vestnik - Journal of Mechanical Engineering [Online], 41.9-10 (1995): 295-310. Web. 20 Dec. 2024
TY - JOUR AU - Medič, Marjan AU - Hlebanja, Jože PY - 1995 TI - Characteristics of Wood Planing with an Obliquely Positioned Cylindrical Spindle and Its Effects on the Generated Surface JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - Wood Planing; Obliquely Positioned Cylindrical Spindle; Effects; Generated Surface; N2 - Wood planing, by principle of operation, is circumferential contour milling with a cylindrical spindle. In the wood working industry, it is one of the conventional procedures for machining flat surfaces. The aim of this research was to study the characteristics of cutting when the feeding of the workpiece runs obliquely to the axis of the planing spindle. The research investigation studied the influence of the planing spindle angle of obliquity on the geometry of the generated surface and chip. Special attention was devoted to the effects of eccentricity of the planing spindle on the shape of the generated surface. The calculated geometry is compared to experimentally measured values after machining two different kinds of wood. The measured generated surface profiles have a strongly expressed periodicity. In the given machining conditions, the wave length and the amplitude of this periodicity are to a large extent defined by the path of the cutting edge through the workpiece. In addition to this most influential frequency, the shape of the generated profile is defined also by a random effect as a result of the anatomy characteristics of a given wood structure. UR - https://www.sv-jme.eu/article/characteristics-of-wood-planing-with-an-obliquely-positioned-cylindrical-spindle-and-its-effects-on-the-generated-surface/
@article{{}{.},
author = {Medič, M., Hlebanja, J.},
title = {Characteristics of Wood Planing with an Obliquely Positioned Cylindrical Spindle and Its Effects on the Generated Surface},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {41},
number = {9-10},
year = {1995},
doi = {},
url = {https://www.sv-jme.eu/article/characteristics-of-wood-planing-with-an-obliquely-positioned-cylindrical-spindle-and-its-effects-on-the-generated-surface/}
}
TY - JOUR AU - Medič, Marjan AU - Hlebanja, Jože PY - 2017/11/11 TI - Characteristics of Wood Planing with an Obliquely Positioned Cylindrical Spindle and Its Effects on the Generated Surface JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 41, No 9-10 (1995): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - Wood Planing, Obliquely Positioned Cylindrical Spindle, Effects, Generated Surface, N2 - Wood planing, by principle of operation, is circumferential contour milling with a cylindrical spindle. In the wood working industry, it is one of the conventional procedures for machining flat surfaces. The aim of this research was to study the characteristics of cutting when the feeding of the workpiece runs obliquely to the axis of the planing spindle. The research investigation studied the influence of the planing spindle angle of obliquity on the geometry of the generated surface and chip. Special attention was devoted to the effects of eccentricity of the planing spindle on the shape of the generated surface. The calculated geometry is compared to experimentally measured values after machining two different kinds of wood. The measured generated surface profiles have a strongly expressed periodicity. In the given machining conditions, the wave length and the amplitude of this periodicity are to a large extent defined by the path of the cutting edge through the workpiece. In addition to this most influential frequency, the shape of the generated profile is defined also by a random effect as a result of the anatomy characteristics of a given wood structure. UR - https://www.sv-jme.eu/article/characteristics-of-wood-planing-with-an-obliquely-positioned-cylindrical-spindle-and-its-effects-on-the-generated-surface/
Medič, Marjan, AND Hlebanja, Jože. "Characteristics of Wood Planing with an Obliquely Positioned Cylindrical Spindle and Its Effects on the Generated Surface" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 41 Number 9-10 (11 November 2017)
Strojniški vestnik - Journal of Mechanical Engineering 41(1995)9-10, 295-310
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Wood planing, by principle of operation, is circumferential contour milling with a cylindrical spindle. In the wood working industry, it is one of the conventional procedures for machining flat surfaces. The aim of this research was to study the characteristics of cutting when the feeding of the workpiece runs obliquely to the axis of the planing spindle. The research investigation studied the influence of the planing spindle angle of obliquity on the geometry of the generated surface and chip. Special attention was devoted to the effects of eccentricity of the planing spindle on the shape of the generated surface. The calculated geometry is compared to experimentally measured values after machining two different kinds of wood. The measured generated surface profiles have a strongly expressed periodicity. In the given machining conditions, the wave length and the amplitude of this periodicity are to a large extent defined by the path of the cutting edge through the workpiece. In addition to this most influential frequency, the shape of the generated profile is defined also by a random effect as a result of the anatomy characteristics of a given wood structure.