Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement

GRGURAŠ, Damir ;KRAMAR, Davorin .
Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 63, n.10, p. 567-576, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/optimization-of-the-hybrid-manufacturing-for-surface-quality-material-consumption-and-productivity-improvement/>. Date accessed: 20 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2017.4396.

Grguraš, D., & Kramar, D.
(2017).
Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement.
Strojniški vestnik - Journal of Mechanical Engineering, 63(10), 567-576.
doi:http://dx.doi.org/10.5545/sv-jme.2017.4396

@article{sv-jmesv-jme.2017.4396,
	author = {Damir  Grguraš and Davorin  Kramar},
	title = {Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {63},
	number = {10},
	year = {2017},
	keywords = {hybrid manufacturing, fused deposition modeling, milling, PLA material, design of experiments – DOE, empirical modeling and optimization, response surface methodology – RSM},
	abstract = {This paper presents hybrid manufacturing process of 3D printing and milling. Fused deposition modeling (FDM) has been applied to improve product manufacturing performance, afterwards, milling was used to improve outer surface roughness. Today’s FDM systems rely on the use of standard nozzle size with a diameter of D1 = 0.4 mm. To achieve shorter production times a bigger nozzle size (diameter D2 = 1.1 mm) has been used in this research. Optimization of technological parameters of hybrid manufacturing was carried out according to the minimal time of production, a minimal final surface roughness and minimal usage of material. In addition, these results were compared with optimal results obtained with the standard nozzle size. Significantly shorter production time, without affecting surface quality, was achieved when using bigger nozzle size.},
	issn = {0039-2480},	pages = {567-576},	doi = {10.5545/sv-jme.2017.4396},
	url = {https://www.sv-jme.eu/article/optimization-of-the-hybrid-manufacturing-for-surface-quality-material-consumption-and-productivity-improvement/}
}

Grguraš, D.,Kramar, D.
2017 June 63. Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 63:10

%A Grguraš, Damir 
%A Kramar, Davorin 
%D 2017
%T Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement
%B 2017
%9 hybrid manufacturing, fused deposition modeling, milling, PLA material, design of experiments – DOE, empirical modeling and optimization, response surface methodology – RSM
%! Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement
%K hybrid manufacturing, fused deposition modeling, milling, PLA material, design of experiments – DOE, empirical modeling and optimization, response surface methodology – RSM
%X This paper presents hybrid manufacturing process of 3D printing and milling. Fused deposition modeling (FDM) has been applied to improve product manufacturing performance, afterwards, milling was used to improve outer surface roughness. Today’s FDM systems rely on the use of standard nozzle size with a diameter of D1 = 0.4 mm. To achieve shorter production times a bigger nozzle size (diameter D2 = 1.1 mm) has been used in this research. Optimization of technological parameters of hybrid manufacturing was carried out according to the minimal time of production, a minimal final surface roughness and minimal usage of material. In addition, these results were compared with optimal results obtained with the standard nozzle size. Significantly shorter production time, without affecting surface quality, was achieved when using bigger nozzle size.
%U https://www.sv-jme.eu/article/optimization-of-the-hybrid-manufacturing-for-surface-quality-material-consumption-and-productivity-improvement/
%0 Journal Article
%R 10.5545/sv-jme.2017.4396
%& 567
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 63
%N 10
%@ 0039-2480
%8 2018-06-27
%7 2018-06-27

Grguraš, Damir, & Davorin  Kramar.
"Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement." Strojniški vestnik - Journal of Mechanical Engineering [Online], 63.10 (2017): 567-576. Web.  20 Dec. 2024

TY  - JOUR
AU  - Grguraš, Damir 
AU  - Kramar, Davorin 
PY  - 2017
TI  - Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.4396
KW  - hybrid manufacturing, fused deposition modeling, milling, PLA material, design of experiments – DOE, empirical modeling and optimization, response surface methodology – RSM
N2  - This paper presents hybrid manufacturing process of 3D printing and milling. Fused deposition modeling (FDM) has been applied to improve product manufacturing performance, afterwards, milling was used to improve outer surface roughness. Today’s FDM systems rely on the use of standard nozzle size with a diameter of D1 = 0.4 mm. To achieve shorter production times a bigger nozzle size (diameter D2 = 1.1 mm) has been used in this research. Optimization of technological parameters of hybrid manufacturing was carried out according to the minimal time of production, a minimal final surface roughness and minimal usage of material. In addition, these results were compared with optimal results obtained with the standard nozzle size. Significantly shorter production time, without affecting surface quality, was achieved when using bigger nozzle size.
UR  - https://www.sv-jme.eu/article/optimization-of-the-hybrid-manufacturing-for-surface-quality-material-consumption-and-productivity-improvement/

@article{{sv-jme}{sv-jme.2017.4396},
	author = {Grguraš, D., Kramar, D.},
	title = {Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {63},
	number = {10},
	year = {2017},
	doi = {10.5545/sv-jme.2017.4396},
	url = {https://www.sv-jme.eu/article/optimization-of-the-hybrid-manufacturing-for-surface-quality-material-consumption-and-productivity-improvement/}
}

TY  - JOUR
AU  - Grguraš, Damir 
AU  - Kramar, Davorin 
PY  - 2018/06/27
TI  - Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 63, No 10 (2017): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2017.4396
KW  - hybrid manufacturing, fused deposition modeling, milling, PLA material, design of experiments – DOE, empirical modeling and optimization, response surface methodology – RSM
N2  - This paper presents hybrid manufacturing process of 3D printing and milling. Fused deposition modeling (FDM) has been applied to improve product manufacturing performance, afterwards, milling was used to improve outer surface roughness. Today’s FDM systems rely on the use of standard nozzle size with a diameter of D1 = 0.4 mm. To achieve shorter production times a bigger nozzle size (diameter D2 = 1.1 mm) has been used in this research. Optimization of technological parameters of hybrid manufacturing was carried out according to the minimal time of production, a minimal final surface roughness and minimal usage of material. In addition, these results were compared with optimal results obtained with the standard nozzle size. Significantly shorter production time, without affecting surface quality, was achieved when using bigger nozzle size.
UR  - https://www.sv-jme.eu/article/optimization-of-the-hybrid-manufacturing-for-surface-quality-material-consumption-and-productivity-improvement/

Grguraš, Damir, AND Kramar, Davorin.
"Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 63 Number 10 (27 June 2018)