WANG, Xiaofeng ;LIU, Jun ;GE, Weimin . A Practical Method to Detect a Transverse Cracked Rotor Using Transient Response. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 63, n.6, p. 394-404, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/a-practical-method-to-detect-a-transverse-cracked-rotor-using-transient-response/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2017.4332.
Wang, X., Liu, J., & Ge, W. (2017). A Practical Method to Detect a Transverse Cracked Rotor Using Transient Response. Strojniški vestnik - Journal of Mechanical Engineering, 63(6), 394-404. doi:http://dx.doi.org/10.5545/sv-jme.2017.4332
@article{sv-jmesv-jme.2017.4332, author = {Xiaofeng Wang and Jun Liu and Weimin Ge}, title = {A Practical Method to Detect a Transverse Cracked Rotor Using Transient Response}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {63}, number = {6}, year = {2017}, keywords = {transient response, nonlinear rotor, cracked rotor, crack identification, experiments}, abstract = {To detect a transverse crack caused by fatigue or creep, most of the research has thus far paid attention only to resonances of steady-state oscillations created by the crack and proposed diagnosis systems utilizing these vibration phenomena. However, from a practical view point, these diagnosis systems have the following flaws: (1) the probability that a resonance occurs due to a crack in the rated rotational speed range is a lower position; (2) It is very dangerous to observe vibration characteristics in resonance ranges. In order to solve these problems, this paper uses a practical detection method utilizing the characteristic changes in a transient oscillation during the start-up, the shutdown, or the variable running speeds of rotating machinery. This method has great advantages, because it can check the occurrence signals of a crack in a wide speed range using a single sweep and avoid the operation in dangerous resonance ranges. Non-stationary characteristics during passages through the main resonance and various kinds of resonances are studied numerically and experimentally.}, issn = {0039-2480}, pages = {394-404}, doi = {10.5545/sv-jme.2017.4332}, url = {https://www.sv-jme.eu/article/a-practical-method-to-detect-a-transverse-cracked-rotor-using-transient-response/} }
Wang, X.,Liu, J.,Ge, W. 2017 June 63. A Practical Method to Detect a Transverse Cracked Rotor Using Transient Response. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 63:6
%A Wang, Xiaofeng %A Liu, Jun %A Ge, Weimin %D 2017 %T A Practical Method to Detect a Transverse Cracked Rotor Using Transient Response %B 2017 %9 transient response, nonlinear rotor, cracked rotor, crack identification, experiments %! A Practical Method to Detect a Transverse Cracked Rotor Using Transient Response %K transient response, nonlinear rotor, cracked rotor, crack identification, experiments %X To detect a transverse crack caused by fatigue or creep, most of the research has thus far paid attention only to resonances of steady-state oscillations created by the crack and proposed diagnosis systems utilizing these vibration phenomena. However, from a practical view point, these diagnosis systems have the following flaws: (1) the probability that a resonance occurs due to a crack in the rated rotational speed range is a lower position; (2) It is very dangerous to observe vibration characteristics in resonance ranges. In order to solve these problems, this paper uses a practical detection method utilizing the characteristic changes in a transient oscillation during the start-up, the shutdown, or the variable running speeds of rotating machinery. This method has great advantages, because it can check the occurrence signals of a crack in a wide speed range using a single sweep and avoid the operation in dangerous resonance ranges. Non-stationary characteristics during passages through the main resonance and various kinds of resonances are studied numerically and experimentally. %U https://www.sv-jme.eu/article/a-practical-method-to-detect-a-transverse-cracked-rotor-using-transient-response/ %0 Journal Article %R 10.5545/sv-jme.2017.4332 %& 394 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 63 %N 6 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Wang, Xiaofeng, Jun Liu, & Weimin Ge. "A Practical Method to Detect a Transverse Cracked Rotor Using Transient Response." Strojniški vestnik - Journal of Mechanical Engineering [Online], 63.6 (2017): 394-404. Web. 01 Sep. 2024
TY - JOUR AU - Wang, Xiaofeng AU - Liu, Jun AU - Ge, Weimin PY - 2017 TI - A Practical Method to Detect a Transverse Cracked Rotor Using Transient Response JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2017.4332 KW - transient response, nonlinear rotor, cracked rotor, crack identification, experiments N2 - To detect a transverse crack caused by fatigue or creep, most of the research has thus far paid attention only to resonances of steady-state oscillations created by the crack and proposed diagnosis systems utilizing these vibration phenomena. However, from a practical view point, these diagnosis systems have the following flaws: (1) the probability that a resonance occurs due to a crack in the rated rotational speed range is a lower position; (2) It is very dangerous to observe vibration characteristics in resonance ranges. In order to solve these problems, this paper uses a practical detection method utilizing the characteristic changes in a transient oscillation during the start-up, the shutdown, or the variable running speeds of rotating machinery. This method has great advantages, because it can check the occurrence signals of a crack in a wide speed range using a single sweep and avoid the operation in dangerous resonance ranges. Non-stationary characteristics during passages through the main resonance and various kinds of resonances are studied numerically and experimentally. UR - https://www.sv-jme.eu/article/a-practical-method-to-detect-a-transverse-cracked-rotor-using-transient-response/
@article{{sv-jme}{sv-jme.2017.4332}, author = {Wang, X., Liu, J., Ge, W.}, title = {A Practical Method to Detect a Transverse Cracked Rotor Using Transient Response}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {63}, number = {6}, year = {2017}, doi = {10.5545/sv-jme.2017.4332}, url = {https://www.sv-jme.eu/article/a-practical-method-to-detect-a-transverse-cracked-rotor-using-transient-response/} }
TY - JOUR AU - Wang, Xiaofeng AU - Liu, Jun AU - Ge, Weimin PY - 2018/06/27 TI - A Practical Method to Detect a Transverse Cracked Rotor Using Transient Response JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 63, No 6 (2017): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2017.4332 KW - transient response, nonlinear rotor, cracked rotor, crack identification, experiments N2 - To detect a transverse crack caused by fatigue or creep, most of the research has thus far paid attention only to resonances of steady-state oscillations created by the crack and proposed diagnosis systems utilizing these vibration phenomena. However, from a practical view point, these diagnosis systems have the following flaws: (1) the probability that a resonance occurs due to a crack in the rated rotational speed range is a lower position; (2) It is very dangerous to observe vibration characteristics in resonance ranges. In order to solve these problems, this paper uses a practical detection method utilizing the characteristic changes in a transient oscillation during the start-up, the shutdown, or the variable running speeds of rotating machinery. This method has great advantages, because it can check the occurrence signals of a crack in a wide speed range using a single sweep and avoid the operation in dangerous resonance ranges. Non-stationary characteristics during passages through the main resonance and various kinds of resonances are studied numerically and experimentally. UR - https://www.sv-jme.eu/article/a-practical-method-to-detect-a-transverse-cracked-rotor-using-transient-response/
Wang, Xiaofeng, Liu, Jun, AND Ge, Weimin. "A Practical Method to Detect a Transverse Cracked Rotor Using Transient Response" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 63 Number 6 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 63(2017)6, 394-404
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
To detect a transverse crack caused by fatigue or creep, most of the research has thus far paid attention only to resonances of steady-state oscillations created by the crack and proposed diagnosis systems utilizing these vibration phenomena. However, from a practical view point, these diagnosis systems have the following flaws: (1) the probability that a resonance occurs due to a crack in the rated rotational speed range is a lower position; (2) It is very dangerous to observe vibration characteristics in resonance ranges. In order to solve these problems, this paper uses a practical detection method utilizing the characteristic changes in a transient oscillation during the start-up, the shutdown, or the variable running speeds of rotating machinery. This method has great advantages, because it can check the occurrence signals of a crack in a wide speed range using a single sweep and avoid the operation in dangerous resonance ranges. Non-stationary characteristics during passages through the main resonance and various kinds of resonances are studied numerically and experimentally.