HOMAR, David ;PUŠAVEC, Franci . The Development of a Recognition Geometry Algorithm for Hybrid – Subtractive and Additive Manufacturing. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 63, n.3, p. 151-160, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/the-development-of-a-recognition-geometry-algorithm-for-hybrid-subtractive-and-additive-manufacturing/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2016.3924.
Homar, D., & Pušavec, F. (2017). The Development of a Recognition Geometry Algorithm for Hybrid – Subtractive and Additive Manufacturing. Strojniški vestnik - Journal of Mechanical Engineering, 63(3), 151-160. doi:http://dx.doi.org/10.5545/sv-jme.2016.3924
@article{sv-jmesv-jme.2016.3924,
author = {David Homar and Franci Pušavec},
title = {The Development of a Recognition Geometry Algorithm for Hybrid – Subtractive and Additive Manufacturing},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {63},
number = {3},
year = {2017},
keywords = {hybrid manufacturing; additive manufacturing; subtractive manufacturing; machining; conformal cooling channels},
abstract = {In the last decade additive manufacturing of metal components has experienced enormous development. One of the most important achievements in this sector is the fact that nowadays it is possible to produce fully dense metal parts. Generally, additive manufacturing technologies are able to produce very complex geometries but are time and cost consuming for manufacturing of massive components. Machining technology, on the other hand, has the opposite characteristics. Both technologies, additive and subtractive, have advantages and disadvantages depending on the amount of material that need to be added or subtracted. The combination of these two technologies (i.e. hybrid manufacturing) results in a process where advantages of both technologies can be expected (cost, material consumption, etc.). Thusa novelty, the paper presents a development and analysis of software that analyzes the CAD model with geometry of the model and declares which part of model will be manufactured with machining and which will be produced by additive manufacturing. The software is evaluated on an industrial case from the field of injection mould inserts. Results show that such an automated algorithm decreases cost, better efficiency and nevertheless offer possibility to implement technology in industrial environment to improve manufacturing processes, i.e. in current case injection moulding process/technology.},
issn = {0039-2480}, pages = {151-160}, doi = {10.5545/sv-jme.2016.3924},
url = {https://www.sv-jme.eu/article/the-development-of-a-recognition-geometry-algorithm-for-hybrid-subtractive-and-additive-manufacturing/}
}
Homar, D.,Pušavec, F. 2017 June 63. The Development of a Recognition Geometry Algorithm for Hybrid – Subtractive and Additive Manufacturing. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 63:3
%A Homar, David %A Pušavec, Franci %D 2017 %T The Development of a Recognition Geometry Algorithm for Hybrid – Subtractive and Additive Manufacturing %B 2017 %9 hybrid manufacturing; additive manufacturing; subtractive manufacturing; machining; conformal cooling channels %! The Development of a Recognition Geometry Algorithm for Hybrid – Subtractive and Additive Manufacturing %K hybrid manufacturing; additive manufacturing; subtractive manufacturing; machining; conformal cooling channels %X In the last decade additive manufacturing of metal components has experienced enormous development. One of the most important achievements in this sector is the fact that nowadays it is possible to produce fully dense metal parts. Generally, additive manufacturing technologies are able to produce very complex geometries but are time and cost consuming for manufacturing of massive components. Machining technology, on the other hand, has the opposite characteristics. Both technologies, additive and subtractive, have advantages and disadvantages depending on the amount of material that need to be added or subtracted. The combination of these two technologies (i.e. hybrid manufacturing) results in a process where advantages of both technologies can be expected (cost, material consumption, etc.). Thusa novelty, the paper presents a development and analysis of software that analyzes the CAD model with geometry of the model and declares which part of model will be manufactured with machining and which will be produced by additive manufacturing. The software is evaluated on an industrial case from the field of injection mould inserts. Results show that such an automated algorithm decreases cost, better efficiency and nevertheless offer possibility to implement technology in industrial environment to improve manufacturing processes, i.e. in current case injection moulding process/technology. %U https://www.sv-jme.eu/article/the-development-of-a-recognition-geometry-algorithm-for-hybrid-subtractive-and-additive-manufacturing/ %0 Journal Article %R 10.5545/sv-jme.2016.3924 %& 151 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 63 %N 3 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Homar, David, & Franci Pušavec. "The Development of a Recognition Geometry Algorithm for Hybrid – Subtractive and Additive Manufacturing." Strojniški vestnik - Journal of Mechanical Engineering [Online], 63.3 (2017): 151-160. Web. 20 Dec. 2024
TY - JOUR AU - Homar, David AU - Pušavec, Franci PY - 2017 TI - The Development of a Recognition Geometry Algorithm for Hybrid – Subtractive and Additive Manufacturing JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.3924 KW - hybrid manufacturing; additive manufacturing; subtractive manufacturing; machining; conformal cooling channels N2 - In the last decade additive manufacturing of metal components has experienced enormous development. One of the most important achievements in this sector is the fact that nowadays it is possible to produce fully dense metal parts. Generally, additive manufacturing technologies are able to produce very complex geometries but are time and cost consuming for manufacturing of massive components. Machining technology, on the other hand, has the opposite characteristics. Both technologies, additive and subtractive, have advantages and disadvantages depending on the amount of material that need to be added or subtracted. The combination of these two technologies (i.e. hybrid manufacturing) results in a process where advantages of both technologies can be expected (cost, material consumption, etc.). Thusa novelty, the paper presents a development and analysis of software that analyzes the CAD model with geometry of the model and declares which part of model will be manufactured with machining and which will be produced by additive manufacturing. The software is evaluated on an industrial case from the field of injection mould inserts. Results show that such an automated algorithm decreases cost, better efficiency and nevertheless offer possibility to implement technology in industrial environment to improve manufacturing processes, i.e. in current case injection moulding process/technology. UR - https://www.sv-jme.eu/article/the-development-of-a-recognition-geometry-algorithm-for-hybrid-subtractive-and-additive-manufacturing/
@article{{sv-jme}{sv-jme.2016.3924},
author = {Homar, D., Pušavec, F.},
title = {The Development of a Recognition Geometry Algorithm for Hybrid – Subtractive and Additive Manufacturing},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {63},
number = {3},
year = {2017},
doi = {10.5545/sv-jme.2016.3924},
url = {https://www.sv-jme.eu/article/the-development-of-a-recognition-geometry-algorithm-for-hybrid-subtractive-and-additive-manufacturing/}
}
TY - JOUR AU - Homar, David AU - Pušavec, Franci PY - 2018/06/27 TI - The Development of a Recognition Geometry Algorithm for Hybrid – Subtractive and Additive Manufacturing JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 63, No 3 (2017): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.3924 KW - hybrid manufacturing, additive manufacturing, subtractive manufacturing, machining, conformal cooling channels N2 - In the last decade additive manufacturing of metal components has experienced enormous development. One of the most important achievements in this sector is the fact that nowadays it is possible to produce fully dense metal parts. Generally, additive manufacturing technologies are able to produce very complex geometries but are time and cost consuming for manufacturing of massive components. Machining technology, on the other hand, has the opposite characteristics. Both technologies, additive and subtractive, have advantages and disadvantages depending on the amount of material that need to be added or subtracted. The combination of these two technologies (i.e. hybrid manufacturing) results in a process where advantages of both technologies can be expected (cost, material consumption, etc.). Thusa novelty, the paper presents a development and analysis of software that analyzes the CAD model with geometry of the model and declares which part of model will be manufactured with machining and which will be produced by additive manufacturing. The software is evaluated on an industrial case from the field of injection mould inserts. Results show that such an automated algorithm decreases cost, better efficiency and nevertheless offer possibility to implement technology in industrial environment to improve manufacturing processes, i.e. in current case injection moulding process/technology. UR - https://www.sv-jme.eu/article/the-development-of-a-recognition-geometry-algorithm-for-hybrid-subtractive-and-additive-manufacturing/
Homar, David, AND Pušavec, Franci. "The Development of a Recognition Geometry Algorithm for Hybrid – Subtractive and Additive Manufacturing" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 63 Number 3 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 63(2017)3, 151-160
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In the last decade additive manufacturing of metal components has experienced enormous development. One of the most important achievements in this sector is the fact that nowadays it is possible to produce fully dense metal parts. Generally, additive manufacturing technologies are able to produce very complex geometries but are time and cost consuming for manufacturing of massive components. Machining technology, on the other hand, has the opposite characteristics. Both technologies, additive and subtractive, have advantages and disadvantages depending on the amount of material that need to be added or subtracted. The combination of these two technologies (i.e. hybrid manufacturing) results in a process where advantages of both technologies can be expected (cost, material consumption, etc.). Thusa novelty, the paper presents a development and analysis of software that analyzes the CAD model with geometry of the model and declares which part of model will be manufactured with machining and which will be produced by additive manufacturing. The software is evaluated on an industrial case from the field of injection mould inserts. Results show that such an automated algorithm decreases cost, better efficiency and nevertheless offer possibility to implement technology in industrial environment to improve manufacturing processes, i.e. in current case injection moulding process/technology.