MANIN, Lionel ;BRAUN, Stefan ;HUGUES, Damien . Modelling the Belt – Envelope Interactions during the Postal Mail Conveying by a Sorting Machine. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 62, n.7-8, p. 463-470, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/modelling-the-belt-envelope-interactions-during-the-postal-mail-conveying-by-a-sorting-machine/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2016.3770.
Manin, L., Braun, S., & Hugues, D. (2016). Modelling the Belt – Envelope Interactions during the Postal Mail Conveying by a Sorting Machine. Strojniški vestnik - Journal of Mechanical Engineering, 62(7-8), 463-470. doi:http://dx.doi.org/10.5545/sv-jme.2016.3770
@article{sv-jmesv-jme.2016.3770, author = {Lionel Manin and Stefan Braun and Damien Hugues}, title = {Modelling the Belt – Envelope Interactions during the Postal Mail Conveying by a Sorting Machine}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {62}, number = {7-8}, year = {2016}, keywords = {mail sorting machine; belts; envelope; conveying; simulation}, abstract = {The purpose of this study is to predict the trajectory of an envelope when conveyed between two flat belts in a mail sorting machine. Each of the two sides of the envelope is in contact with one belt. The friction coefficient can vary between the two sides, e.g. for the cases of a postcard or a plastic windowed envelope. The two belts are assumed to travel horizontally with the same velocities, but in real world small velocity differences can occur. Also, some deviation from the horizontality of the belts can be observed. These phenomena can lead to unexpected situations where the relative position of the envelope to the belt changes during transportation. The work focuses on the belt-envelope mechanical interactions in order to predict the envelope position during its conveying. A 2D model is developed which considers the dynamic equilibrium of the envelope and simulates the transient behavior at different locations in the sorting machine. In the dynamic friction model, the contact surfaces between the envelope sides and the belts have to be determined at each time step. The belt/envelope friction forces are applied at the centers of these contact surfaces One side of the envelope is considered stuck (in adhesion) to the belt while the other is considered slipping. The position of the envelope center of gravity and the angle with the horizontal axis are calculated. For evaluation of the proposed dynamic model, several cases of operation are simulated.}, issn = {0039-2480}, pages = {463-470}, doi = {10.5545/sv-jme.2016.3770}, url = {https://www.sv-jme.eu/article/modelling-the-belt-envelope-interactions-during-the-postal-mail-conveying-by-a-sorting-machine/} }
Manin, L.,Braun, S.,Hugues, D. 2016 June 62. Modelling the Belt – Envelope Interactions during the Postal Mail Conveying by a Sorting Machine. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 62:7-8
%A Manin, Lionel %A Braun, Stefan %A Hugues, Damien %D 2016 %T Modelling the Belt – Envelope Interactions during the Postal Mail Conveying by a Sorting Machine %B 2016 %9 mail sorting machine; belts; envelope; conveying; simulation %! Modelling the Belt – Envelope Interactions during the Postal Mail Conveying by a Sorting Machine %K mail sorting machine; belts; envelope; conveying; simulation %X The purpose of this study is to predict the trajectory of an envelope when conveyed between two flat belts in a mail sorting machine. Each of the two sides of the envelope is in contact with one belt. The friction coefficient can vary between the two sides, e.g. for the cases of a postcard or a plastic windowed envelope. The two belts are assumed to travel horizontally with the same velocities, but in real world small velocity differences can occur. Also, some deviation from the horizontality of the belts can be observed. These phenomena can lead to unexpected situations where the relative position of the envelope to the belt changes during transportation. The work focuses on the belt-envelope mechanical interactions in order to predict the envelope position during its conveying. A 2D model is developed which considers the dynamic equilibrium of the envelope and simulates the transient behavior at different locations in the sorting machine. In the dynamic friction model, the contact surfaces between the envelope sides and the belts have to be determined at each time step. The belt/envelope friction forces are applied at the centers of these contact surfaces One side of the envelope is considered stuck (in adhesion) to the belt while the other is considered slipping. The position of the envelope center of gravity and the angle with the horizontal axis are calculated. For evaluation of the proposed dynamic model, several cases of operation are simulated. %U https://www.sv-jme.eu/article/modelling-the-belt-envelope-interactions-during-the-postal-mail-conveying-by-a-sorting-machine/ %0 Journal Article %R 10.5545/sv-jme.2016.3770 %& 463 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 62 %N 7-8 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Manin, Lionel, Stefan Braun, & Damien Hugues. "Modelling the Belt – Envelope Interactions during the Postal Mail Conveying by a Sorting Machine." Strojniški vestnik - Journal of Mechanical Engineering [Online], 62.7-8 (2016): 463-470. Web. 01 Sep. 2024
TY - JOUR AU - Manin, Lionel AU - Braun, Stefan AU - Hugues, Damien PY - 2016 TI - Modelling the Belt – Envelope Interactions during the Postal Mail Conveying by a Sorting Machine JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.3770 KW - mail sorting machine; belts; envelope; conveying; simulation N2 - The purpose of this study is to predict the trajectory of an envelope when conveyed between two flat belts in a mail sorting machine. Each of the two sides of the envelope is in contact with one belt. The friction coefficient can vary between the two sides, e.g. for the cases of a postcard or a plastic windowed envelope. The two belts are assumed to travel horizontally with the same velocities, but in real world small velocity differences can occur. Also, some deviation from the horizontality of the belts can be observed. These phenomena can lead to unexpected situations where the relative position of the envelope to the belt changes during transportation. The work focuses on the belt-envelope mechanical interactions in order to predict the envelope position during its conveying. A 2D model is developed which considers the dynamic equilibrium of the envelope and simulates the transient behavior at different locations in the sorting machine. In the dynamic friction model, the contact surfaces between the envelope sides and the belts have to be determined at each time step. The belt/envelope friction forces are applied at the centers of these contact surfaces One side of the envelope is considered stuck (in adhesion) to the belt while the other is considered slipping. The position of the envelope center of gravity and the angle with the horizontal axis are calculated. For evaluation of the proposed dynamic model, several cases of operation are simulated. UR - https://www.sv-jme.eu/article/modelling-the-belt-envelope-interactions-during-the-postal-mail-conveying-by-a-sorting-machine/
@article{{sv-jme}{sv-jme.2016.3770}, author = {Manin, L., Braun, S., Hugues, D.}, title = {Modelling the Belt – Envelope Interactions during the Postal Mail Conveying by a Sorting Machine}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {62}, number = {7-8}, year = {2016}, doi = {10.5545/sv-jme.2016.3770}, url = {https://www.sv-jme.eu/article/modelling-the-belt-envelope-interactions-during-the-postal-mail-conveying-by-a-sorting-machine/} }
TY - JOUR AU - Manin, Lionel AU - Braun, Stefan AU - Hugues, Damien PY - 2018/06/27 TI - Modelling the Belt – Envelope Interactions during the Postal Mail Conveying by a Sorting Machine JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 62, No 7-8 (2016): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.3770 KW - mail sorting machine, belts, envelope, conveying, simulation N2 - The purpose of this study is to predict the trajectory of an envelope when conveyed between two flat belts in a mail sorting machine. Each of the two sides of the envelope is in contact with one belt. The friction coefficient can vary between the two sides, e.g. for the cases of a postcard or a plastic windowed envelope. The two belts are assumed to travel horizontally with the same velocities, but in real world small velocity differences can occur. Also, some deviation from the horizontality of the belts can be observed. These phenomena can lead to unexpected situations where the relative position of the envelope to the belt changes during transportation. The work focuses on the belt-envelope mechanical interactions in order to predict the envelope position during its conveying. A 2D model is developed which considers the dynamic equilibrium of the envelope and simulates the transient behavior at different locations in the sorting machine. In the dynamic friction model, the contact surfaces between the envelope sides and the belts have to be determined at each time step. The belt/envelope friction forces are applied at the centers of these contact surfaces One side of the envelope is considered stuck (in adhesion) to the belt while the other is considered slipping. The position of the envelope center of gravity and the angle with the horizontal axis are calculated. For evaluation of the proposed dynamic model, several cases of operation are simulated. UR - https://www.sv-jme.eu/article/modelling-the-belt-envelope-interactions-during-the-postal-mail-conveying-by-a-sorting-machine/
Manin, Lionel, Braun, Stefan, AND Hugues, Damien. "Modelling the Belt – Envelope Interactions during the Postal Mail Conveying by a Sorting Machine" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 62 Number 7-8 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 62(2016)7-8, 463-470
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The purpose of this study is to predict the trajectory of an envelope when conveyed between two flat belts in a mail sorting machine. Each of the two sides of the envelope is in contact with one belt. The friction coefficient can vary between the two sides, e.g. for the cases of a postcard or a plastic windowed envelope. The two belts are assumed to travel horizontally with the same velocities, but in real world small velocity differences can occur. Also, some deviation from the horizontality of the belts can be observed. These phenomena can lead to unexpected situations where the relative position of the envelope to the belt changes during transportation. The work focuses on the belt-envelope mechanical interactions in order to predict the envelope position during its conveying. A 2D model is developed which considers the dynamic equilibrium of the envelope and simulates the transient behavior at different locations in the sorting machine. In the dynamic friction model, the contact surfaces between the envelope sides and the belts have to be determined at each time step. The belt/envelope friction forces are applied at the centers of these contact surfaces One side of the envelope is considered stuck (in adhesion) to the belt while the other is considered slipping. The position of the envelope center of gravity and the angle with the horizontal axis are calculated. For evaluation of the proposed dynamic model, several cases of operation are simulated.