ILJAŽ, Jurij ;ŠKERGET, Leopold ;ŠTRAKL, Mitja ;MARN, Jure . Optimization of SAE Formula Rear Wing. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 62, n.5, p. 263-272, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/optimization-of-sae-formula-rear-wing/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2016.3240.
Iljaž, J., Škerget, L., Štrakl, M., & Marn, J. (2016). Optimization of SAE Formula Rear Wing. Strojniški vestnik - Journal of Mechanical Engineering, 62(5), 263-272. doi:http://dx.doi.org/10.5545/sv-jme.2016.3240
@article{sv-jmesv-jme.2016.3240,
author = {Jurij Iljaž and Leopold Škerget and Mitja Štrakl and Jure Marn},
title = {Optimization of SAE Formula Rear Wing},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {62},
number = {5},
year = {2016},
keywords = {RANS; rear wing; optimization; CFD; downforce},
abstract = {The main goal of this work was to prove the superiority of a slat vs. a second rear flap in the SAE formula rear wing design, combined with a 3D curved rear flap, for low velocities, by optimization of the rear wing design. Two different main designs were compared, with five different height positions of the main wing and complete analysis carried out of the attack angle on wing performance. A numerical approach was used to test the hypothesis with 3D shear stress transport (SST) Reynolds-averaged Navier-Stokes (RANS) simulation, incorporating the whole formula. A practical use of this work is in designing a rear wing for maximum downforce within the available rules and regulations. It was found that the multi-element wings were suitable for low speeds and that the base design with two flaps should not be positioned too low. The downforce increases with the height of the wing and reaches its maximum value at 8° angle of attack. For this reason, the new curved design was proposed, including a slat and only one flap. The new wing can cope with a greater angle of attack, has a greater lift coefficient, as well as greater maximal downforce. The advanced design resulted in an increase of downforce of about 6 % at the same wing height.},
issn = {0039-2480}, pages = {263-272}, doi = {10.5545/sv-jme.2016.3240},
url = {https://www.sv-jme.eu/article/optimization-of-sae-formula-rear-wing/}
}
Iljaž, J.,Škerget, L.,Štrakl, M.,Marn, J. 2016 June 62. Optimization of SAE Formula Rear Wing. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 62:5
%A Iljaž, Jurij %A Škerget, Leopold %A Štrakl, Mitja %A Marn, Jure %D 2016 %T Optimization of SAE Formula Rear Wing %B 2016 %9 RANS; rear wing; optimization; CFD; downforce %! Optimization of SAE Formula Rear Wing %K RANS; rear wing; optimization; CFD; downforce %X The main goal of this work was to prove the superiority of a slat vs. a second rear flap in the SAE formula rear wing design, combined with a 3D curved rear flap, for low velocities, by optimization of the rear wing design. Two different main designs were compared, with five different height positions of the main wing and complete analysis carried out of the attack angle on wing performance. A numerical approach was used to test the hypothesis with 3D shear stress transport (SST) Reynolds-averaged Navier-Stokes (RANS) simulation, incorporating the whole formula. A practical use of this work is in designing a rear wing for maximum downforce within the available rules and regulations. It was found that the multi-element wings were suitable for low speeds and that the base design with two flaps should not be positioned too low. The downforce increases with the height of the wing and reaches its maximum value at 8° angle of attack. For this reason, the new curved design was proposed, including a slat and only one flap. The new wing can cope with a greater angle of attack, has a greater lift coefficient, as well as greater maximal downforce. The advanced design resulted in an increase of downforce of about 6 % at the same wing height. %U https://www.sv-jme.eu/article/optimization-of-sae-formula-rear-wing/ %0 Journal Article %R 10.5545/sv-jme.2016.3240 %& 263 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 62 %N 5 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Iljaž, Jurij, Leopold Škerget, Mitja Štrakl, & Jure Marn. "Optimization of SAE Formula Rear Wing." Strojniški vestnik - Journal of Mechanical Engineering [Online], 62.5 (2016): 263-272. Web. 20 Dec. 2024
TY - JOUR AU - Iljaž, Jurij AU - Škerget, Leopold AU - Štrakl, Mitja AU - Marn, Jure PY - 2016 TI - Optimization of SAE Formula Rear Wing JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.3240 KW - RANS; rear wing; optimization; CFD; downforce N2 - The main goal of this work was to prove the superiority of a slat vs. a second rear flap in the SAE formula rear wing design, combined with a 3D curved rear flap, for low velocities, by optimization of the rear wing design. Two different main designs were compared, with five different height positions of the main wing and complete analysis carried out of the attack angle on wing performance. A numerical approach was used to test the hypothesis with 3D shear stress transport (SST) Reynolds-averaged Navier-Stokes (RANS) simulation, incorporating the whole formula. A practical use of this work is in designing a rear wing for maximum downforce within the available rules and regulations. It was found that the multi-element wings were suitable for low speeds and that the base design with two flaps should not be positioned too low. The downforce increases with the height of the wing and reaches its maximum value at 8° angle of attack. For this reason, the new curved design was proposed, including a slat and only one flap. The new wing can cope with a greater angle of attack, has a greater lift coefficient, as well as greater maximal downforce. The advanced design resulted in an increase of downforce of about 6 % at the same wing height. UR - https://www.sv-jme.eu/article/optimization-of-sae-formula-rear-wing/
@article{{sv-jme}{sv-jme.2016.3240},
author = {Iljaž, J., Škerget, L., Štrakl, M., Marn, J.},
title = {Optimization of SAE Formula Rear Wing},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {62},
number = {5},
year = {2016},
doi = {10.5545/sv-jme.2016.3240},
url = {https://www.sv-jme.eu/article/optimization-of-sae-formula-rear-wing/}
}
TY - JOUR AU - Iljaž, Jurij AU - Škerget, Leopold AU - Štrakl, Mitja AU - Marn, Jure PY - 2018/06/27 TI - Optimization of SAE Formula Rear Wing JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 62, No 5 (2016): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.3240 KW - RANS, rear wing, optimization, CFD, downforce N2 - The main goal of this work was to prove the superiority of a slat vs. a second rear flap in the SAE formula rear wing design, combined with a 3D curved rear flap, for low velocities, by optimization of the rear wing design. Two different main designs were compared, with five different height positions of the main wing and complete analysis carried out of the attack angle on wing performance. A numerical approach was used to test the hypothesis with 3D shear stress transport (SST) Reynolds-averaged Navier-Stokes (RANS) simulation, incorporating the whole formula. A practical use of this work is in designing a rear wing for maximum downforce within the available rules and regulations. It was found that the multi-element wings were suitable for low speeds and that the base design with two flaps should not be positioned too low. The downforce increases with the height of the wing and reaches its maximum value at 8° angle of attack. For this reason, the new curved design was proposed, including a slat and only one flap. The new wing can cope with a greater angle of attack, has a greater lift coefficient, as well as greater maximal downforce. The advanced design resulted in an increase of downforce of about 6 % at the same wing height. UR - https://www.sv-jme.eu/article/optimization-of-sae-formula-rear-wing/
Iljaž, Jurij, Škerget, Leopold, Štrakl, Mitja, AND Marn, Jure. "Optimization of SAE Formula Rear Wing" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 62 Number 5 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 62(2016)5, 263-272
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The main goal of this work was to prove the superiority of a slat vs. a second rear flap in the SAE formula rear wing design, combined with a 3D curved rear flap, for low velocities, by optimization of the rear wing design. Two different main designs were compared, with five different height positions of the main wing and complete analysis carried out of the attack angle on wing performance. A numerical approach was used to test the hypothesis with 3D shear stress transport (SST) Reynolds-averaged Navier-Stokes (RANS) simulation, incorporating the whole formula. A practical use of this work is in designing a rear wing for maximum downforce within the available rules and regulations. It was found that the multi-element wings were suitable for low speeds and that the base design with two flaps should not be positioned too low. The downforce increases with the height of the wing and reaches its maximum value at 8° angle of attack. For this reason, the new curved design was proposed, including a slat and only one flap. The new wing can cope with a greater angle of attack, has a greater lift coefficient, as well as greater maximal downforce. The advanced design resulted in an increase of downforce of about 6 % at the same wing height.