GARCÍA-HERNÁNDEZ, César ;GELLA-MARÍN, Rafael María;HUERTAS-TALÓN, José-Luis ;EFKOLIDIS, Nikolaos ;KYRATSIS, Panagiotis . WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 62, n.2, p. 137-144, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/wedm-manufacturing-method-for-noncircular-gears-using-cadcam-software/>. Date accessed: 27 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2015.2994.
García-Hernández, C., Gella-Marín, R., Huertas-Talón, J., Efkolidis, N., & Kyratsis, P. (2016). WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software. Strojniški vestnik - Journal of Mechanical Engineering, 62(2), 137-144. doi:http://dx.doi.org/10.5545/sv-jme.2015.2994
@article{sv-jmesv-jme.2015.2994,
author = {César García-Hernández and Rafael María Gella-Marín and José-Luis Huertas-Talón and Nikolaos Efkolidis and Panagiotis Kyratsis},
title = {WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {62},
number = {2},
year = {2016},
keywords = {WEDM; noncircular gears; worksheet; CAD/CAM},
abstract = {Noncircular gears are used in several technological applications in order to enhance the performance of different mechanical instruments (flow meters, bikes, internal combustion engines, etc.), in order to unify speed in assembly lines and in research. Noncircular gears are typically manufactured by shaving: milling each tooth or by generation. This requires controlling the geometric and kinematic variables in the process. In this research, a method to manufacture elliptical and oval gears using wire electro-discharge machining (WEDM) is presented. This is a continuous procedure, and its performance is not inferior to the previously mentioned methods. Mathematical models for manufacturing elliptical and oval gears are presented, simulations are carried out, and this method is implemented in a WEDM machine, obtaining two pairs of elliptical and oval gears. This method could be useful in the manufacturing of injection moulds or custom-made metallic gears. Finally, a discussion using bibliographic references is presented about the surface finish and the consequences of using WEDM in comparison to other shaving methods which do not involve a material phase change.},
issn = {0039-2480}, pages = {137-144}, doi = {10.5545/sv-jme.2015.2994},
url = {https://www.sv-jme.eu/article/wedm-manufacturing-method-for-noncircular-gears-using-cadcam-software/}
}
García-Hernández, C.,Gella-Marín, R.,Huertas-Talón, J.,Efkolidis, N.,Kyratsis, P. 2016 June 62. WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 62:2
%A García-Hernández, César %A Gella-Marín, Rafael María %A Huertas-Talón, José-Luis %A Efkolidis, Nikolaos %A Kyratsis, Panagiotis %D 2016 %T WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software %B 2016 %9 WEDM; noncircular gears; worksheet; CAD/CAM %! WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software %K WEDM; noncircular gears; worksheet; CAD/CAM %X Noncircular gears are used in several technological applications in order to enhance the performance of different mechanical instruments (flow meters, bikes, internal combustion engines, etc.), in order to unify speed in assembly lines and in research. Noncircular gears are typically manufactured by shaving: milling each tooth or by generation. This requires controlling the geometric and kinematic variables in the process. In this research, a method to manufacture elliptical and oval gears using wire electro-discharge machining (WEDM) is presented. This is a continuous procedure, and its performance is not inferior to the previously mentioned methods. Mathematical models for manufacturing elliptical and oval gears are presented, simulations are carried out, and this method is implemented in a WEDM machine, obtaining two pairs of elliptical and oval gears. This method could be useful in the manufacturing of injection moulds or custom-made metallic gears. Finally, a discussion using bibliographic references is presented about the surface finish and the consequences of using WEDM in comparison to other shaving methods which do not involve a material phase change. %U https://www.sv-jme.eu/article/wedm-manufacturing-method-for-noncircular-gears-using-cadcam-software/ %0 Journal Article %R 10.5545/sv-jme.2015.2994 %& 137 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 62 %N 2 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
García-Hernández, César, Rafael María Gella-Marín, José-Luis Huertas-Talón, Nikolaos Efkolidis, & Panagiotis Kyratsis. "WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software." Strojniški vestnik - Journal of Mechanical Engineering [Online], 62.2 (2016): 137-144. Web. 27 Dec. 2024
TY - JOUR AU - García-Hernández, César AU - Gella-Marín, Rafael María AU - Huertas-Talón, José-Luis AU - Efkolidis, Nikolaos AU - Kyratsis, Panagiotis PY - 2016 TI - WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.2994 KW - WEDM; noncircular gears; worksheet; CAD/CAM N2 - Noncircular gears are used in several technological applications in order to enhance the performance of different mechanical instruments (flow meters, bikes, internal combustion engines, etc.), in order to unify speed in assembly lines and in research. Noncircular gears are typically manufactured by shaving: milling each tooth or by generation. This requires controlling the geometric and kinematic variables in the process. In this research, a method to manufacture elliptical and oval gears using wire electro-discharge machining (WEDM) is presented. This is a continuous procedure, and its performance is not inferior to the previously mentioned methods. Mathematical models for manufacturing elliptical and oval gears are presented, simulations are carried out, and this method is implemented in a WEDM machine, obtaining two pairs of elliptical and oval gears. This method could be useful in the manufacturing of injection moulds or custom-made metallic gears. Finally, a discussion using bibliographic references is presented about the surface finish and the consequences of using WEDM in comparison to other shaving methods which do not involve a material phase change. UR - https://www.sv-jme.eu/article/wedm-manufacturing-method-for-noncircular-gears-using-cadcam-software/
@article{{sv-jme}{sv-jme.2015.2994},
author = {García-Hernández, C., Gella-Marín, R., Huertas-Talón, J., Efkolidis, N., Kyratsis, P.},
title = {WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {62},
number = {2},
year = {2016},
doi = {10.5545/sv-jme.2015.2994},
url = {https://www.sv-jme.eu/article/wedm-manufacturing-method-for-noncircular-gears-using-cadcam-software/}
}
TY - JOUR AU - García-Hernández, César AU - Gella-Marín, Rafael María AU - Huertas-Talón, José-Luis AU - Efkolidis, Nikolaos AU - Kyratsis, Panagiotis PY - 2018/06/27 TI - WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 62, No 2 (2016): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.2994 KW - WEDM, noncircular gears, worksheet, CAD/CAM N2 - Noncircular gears are used in several technological applications in order to enhance the performance of different mechanical instruments (flow meters, bikes, internal combustion engines, etc.), in order to unify speed in assembly lines and in research. Noncircular gears are typically manufactured by shaving: milling each tooth or by generation. This requires controlling the geometric and kinematic variables in the process. In this research, a method to manufacture elliptical and oval gears using wire electro-discharge machining (WEDM) is presented. This is a continuous procedure, and its performance is not inferior to the previously mentioned methods. Mathematical models for manufacturing elliptical and oval gears are presented, simulations are carried out, and this method is implemented in a WEDM machine, obtaining two pairs of elliptical and oval gears. This method could be useful in the manufacturing of injection moulds or custom-made metallic gears. Finally, a discussion using bibliographic references is presented about the surface finish and the consequences of using WEDM in comparison to other shaving methods which do not involve a material phase change. UR - https://www.sv-jme.eu/article/wedm-manufacturing-method-for-noncircular-gears-using-cadcam-software/
García-Hernández, César, Gella-Marín, Rafael, Huertas-Talón, José-Luis, Efkolidis, Nikolaos, AND Kyratsis, Panagiotis. "WEDM Manufacturing Method for Noncircular Gears, Using CAD/CAM Software" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 62 Number 2 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 62(2016)2, 137-144
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Noncircular gears are used in several technological applications in order to enhance the performance of different mechanical instruments (flow meters, bikes, internal combustion engines, etc.), in order to unify speed in assembly lines and in research. Noncircular gears are typically manufactured by shaving: milling each tooth or by generation. This requires controlling the geometric and kinematic variables in the process. In this research, a method to manufacture elliptical and oval gears using wire electro-discharge machining (WEDM) is presented. This is a continuous procedure, and its performance is not inferior to the previously mentioned methods. Mathematical models for manufacturing elliptical and oval gears are presented, simulations are carried out, and this method is implemented in a WEDM machine, obtaining two pairs of elliptical and oval gears. This method could be useful in the manufacturing of injection moulds or custom-made metallic gears. Finally, a discussion using bibliographic references is presented about the surface finish and the consequences of using WEDM in comparison to other shaving methods which do not involve a material phase change.