ČUŠ, Franci ;ŽUPERL, Uroš . Surface Roughness Control Simulation of Turning Processes. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 61, n.4, p. 245-253, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/surface-roughness-control-simulation-of-turning-processes/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2014.2345.
Čuš, F., & Župerl, U. (2015). Surface Roughness Control Simulation of Turning Processes. Strojniški vestnik - Journal of Mechanical Engineering, 61(4), 245-253. doi:http://dx.doi.org/10.5545/sv-jme.2014.2345
@article{sv-jmesv-jme.2014.2345, author = {Franci Čuš and Uroš Župerl}, title = {Surface Roughness Control Simulation of Turning Processes}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {61}, number = {4}, year = {2015}, keywords = {machining; turning; surface roughness; model based control; simulation}, abstract = {The aim of this paper is to present a surface roughness control in turning with an associated simulation block diagram. The objective of the new model based controller is to assure the desired surface roughness by adjusting the machining parameters and maintaining a constant cutting force. It modifies the feed rate on-line to keep the surface roughness constant and to make machining more efficient. The control model was developed based on simplified models of the turning process and the feed drive servo-system. The experiments were performed to find the correlation between surface roughness and cutting forces in turning and to provide functional correlation with the controllable factors. Simulation setup and results are presented to demonstrate the efficiency of the proposed control model. In terms of surface roughness fluctuations and cutting efficiency, the suggested control model is much better than a conventional CNC controller alone. Integrating the developed control model with the CNC machine controller significantly improves the quality of machined components.}, issn = {0039-2480}, pages = {245-253}, doi = {10.5545/sv-jme.2014.2345}, url = {https://www.sv-jme.eu/article/surface-roughness-control-simulation-of-turning-processes/} }
Čuš, F.,Župerl, U. 2015 June 61. Surface Roughness Control Simulation of Turning Processes. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 61:4
%A Čuš, Franci %A Župerl, Uroš %D 2015 %T Surface Roughness Control Simulation of Turning Processes %B 2015 %9 machining; turning; surface roughness; model based control; simulation %! Surface Roughness Control Simulation of Turning Processes %K machining; turning; surface roughness; model based control; simulation %X The aim of this paper is to present a surface roughness control in turning with an associated simulation block diagram. The objective of the new model based controller is to assure the desired surface roughness by adjusting the machining parameters and maintaining a constant cutting force. It modifies the feed rate on-line to keep the surface roughness constant and to make machining more efficient. The control model was developed based on simplified models of the turning process and the feed drive servo-system. The experiments were performed to find the correlation between surface roughness and cutting forces in turning and to provide functional correlation with the controllable factors. Simulation setup and results are presented to demonstrate the efficiency of the proposed control model. In terms of surface roughness fluctuations and cutting efficiency, the suggested control model is much better than a conventional CNC controller alone. Integrating the developed control model with the CNC machine controller significantly improves the quality of machined components. %U https://www.sv-jme.eu/article/surface-roughness-control-simulation-of-turning-processes/ %0 Journal Article %R 10.5545/sv-jme.2014.2345 %& 245 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 61 %N 4 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Čuš, Franci, & Uroš Župerl. "Surface Roughness Control Simulation of Turning Processes." Strojniški vestnik - Journal of Mechanical Engineering [Online], 61.4 (2015): 245-253. Web. 01 Sep. 2024
TY - JOUR AU - Čuš, Franci AU - Župerl, Uroš PY - 2015 TI - Surface Roughness Control Simulation of Turning Processes JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2014.2345 KW - machining; turning; surface roughness; model based control; simulation N2 - The aim of this paper is to present a surface roughness control in turning with an associated simulation block diagram. The objective of the new model based controller is to assure the desired surface roughness by adjusting the machining parameters and maintaining a constant cutting force. It modifies the feed rate on-line to keep the surface roughness constant and to make machining more efficient. The control model was developed based on simplified models of the turning process and the feed drive servo-system. The experiments were performed to find the correlation between surface roughness and cutting forces in turning and to provide functional correlation with the controllable factors. Simulation setup and results are presented to demonstrate the efficiency of the proposed control model. In terms of surface roughness fluctuations and cutting efficiency, the suggested control model is much better than a conventional CNC controller alone. Integrating the developed control model with the CNC machine controller significantly improves the quality of machined components. UR - https://www.sv-jme.eu/article/surface-roughness-control-simulation-of-turning-processes/
@article{{sv-jme}{sv-jme.2014.2345}, author = {Čuš, F., Župerl, U.}, title = {Surface Roughness Control Simulation of Turning Processes}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {61}, number = {4}, year = {2015}, doi = {10.5545/sv-jme.2014.2345}, url = {https://www.sv-jme.eu/article/surface-roughness-control-simulation-of-turning-processes/} }
TY - JOUR AU - Čuš, Franci AU - Župerl, Uroš PY - 2018/06/27 TI - Surface Roughness Control Simulation of Turning Processes JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 61, No 4 (2015): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2014.2345 KW - machining, turning, surface roughness, model based control, simulation N2 - The aim of this paper is to present a surface roughness control in turning with an associated simulation block diagram. The objective of the new model based controller is to assure the desired surface roughness by adjusting the machining parameters and maintaining a constant cutting force. It modifies the feed rate on-line to keep the surface roughness constant and to make machining more efficient. The control model was developed based on simplified models of the turning process and the feed drive servo-system. The experiments were performed to find the correlation between surface roughness and cutting forces in turning and to provide functional correlation with the controllable factors. Simulation setup and results are presented to demonstrate the efficiency of the proposed control model. In terms of surface roughness fluctuations and cutting efficiency, the suggested control model is much better than a conventional CNC controller alone. Integrating the developed control model with the CNC machine controller significantly improves the quality of machined components. UR - https://www.sv-jme.eu/article/surface-roughness-control-simulation-of-turning-processes/
Čuš, Franci, AND Župerl, Uroš. "Surface Roughness Control Simulation of Turning Processes" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 61 Number 4 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 61(2015)4, 245-253
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The aim of this paper is to present a surface roughness control in turning with an associated simulation block diagram. The objective of the new model based controller is to assure the desired surface roughness by adjusting the machining parameters and maintaining a constant cutting force. It modifies the feed rate on-line to keep the surface roughness constant and to make machining more efficient. The control model was developed based on simplified models of the turning process and the feed drive servo-system. The experiments were performed to find the correlation between surface roughness and cutting forces in turning and to provide functional correlation with the controllable factors. Simulation setup and results are presented to demonstrate the efficiency of the proposed control model. In terms of surface roughness fluctuations and cutting efficiency, the suggested control model is much better than a conventional CNC controller alone. Integrating the developed control model with the CNC machine controller significantly improves the quality of machined components.