BOLKA, Špela ;SLAVIČ, Janko ;BOLTEŽAR, Miha . Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 61, n.4, p. 217-226, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/identification-of-out-of-plane-material-characteristics-through-sheet-metal-blanking/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2014.2302.
Bolka, ., Slavič, J., & Boltežar, M. (2015). Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking. Strojniški vestnik - Journal of Mechanical Engineering, 61(4), 217-226. doi:http://dx.doi.org/10.5545/sv-jme.2014.2302
@article{sv-jmesv-jme.2014.2302, author = {Špela Bolka and Janko Slavič and Miha Boltežar}, title = {Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {61}, number = {4}, year = {2015}, keywords = {cutting and forming; constitutive behavior; elastic-plastic material; mechanical testing; ductile damage; out-of-plane experiment}, abstract = {The mechanical characteristics of sheet metals are typically identified in the in-plane direction, although the sheet-metal forming processes (e.g., blanking, deep-drawing) are normally applied in the out-of-plane direction. As the mechanical characteristics are not necessarily constant, their direct experimental evaluation through the forming process would enable material monitoring and process optimization, and, additionally, material characterization in the out-of-plane direction. Full, partial (to a certain depth) and sequential (consecutive partial steps to full penetration) blanking experiments are performed on a laboratory blanking apparatus to correlate the out-of-plane material characteristics with the in-plane ones. The well-established in-plane approach to damage is introduced for the out-of-plane direction to determine the isotropic Lemaitre damage variable. Furthermore, yield and ultimate shear stresses are determined and correlated to their respective in-plane counterparts, offering a new insight in the sheet-metal blanking process.}, issn = {0039-2480}, pages = {217-226}, doi = {10.5545/sv-jme.2014.2302}, url = {https://www.sv-jme.eu/article/identification-of-out-of-plane-material-characteristics-through-sheet-metal-blanking/} }
Bolka, .,Slavič, J.,Boltežar, M. 2015 June 61. Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 61:4
%A Bolka, Špela %A Slavič, Janko %A Boltežar, Miha %D 2015 %T Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking %B 2015 %9 cutting and forming; constitutive behavior; elastic-plastic material; mechanical testing; ductile damage; out-of-plane experiment %! Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking %K cutting and forming; constitutive behavior; elastic-plastic material; mechanical testing; ductile damage; out-of-plane experiment %X The mechanical characteristics of sheet metals are typically identified in the in-plane direction, although the sheet-metal forming processes (e.g., blanking, deep-drawing) are normally applied in the out-of-plane direction. As the mechanical characteristics are not necessarily constant, their direct experimental evaluation through the forming process would enable material monitoring and process optimization, and, additionally, material characterization in the out-of-plane direction. Full, partial (to a certain depth) and sequential (consecutive partial steps to full penetration) blanking experiments are performed on a laboratory blanking apparatus to correlate the out-of-plane material characteristics with the in-plane ones. The well-established in-plane approach to damage is introduced for the out-of-plane direction to determine the isotropic Lemaitre damage variable. Furthermore, yield and ultimate shear stresses are determined and correlated to their respective in-plane counterparts, offering a new insight in the sheet-metal blanking process. %U https://www.sv-jme.eu/article/identification-of-out-of-plane-material-characteristics-through-sheet-metal-blanking/ %0 Journal Article %R 10.5545/sv-jme.2014.2302 %& 217 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 61 %N 4 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Bolka, Špela, Janko Slavič, & Miha Boltežar. "Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking." Strojniški vestnik - Journal of Mechanical Engineering [Online], 61.4 (2015): 217-226. Web. 01 Sep. 2024
TY - JOUR AU - Bolka, Špela AU - Slavič, Janko AU - Boltežar, Miha PY - 2015 TI - Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2014.2302 KW - cutting and forming; constitutive behavior; elastic-plastic material; mechanical testing; ductile damage; out-of-plane experiment N2 - The mechanical characteristics of sheet metals are typically identified in the in-plane direction, although the sheet-metal forming processes (e.g., blanking, deep-drawing) are normally applied in the out-of-plane direction. As the mechanical characteristics are not necessarily constant, their direct experimental evaluation through the forming process would enable material monitoring and process optimization, and, additionally, material characterization in the out-of-plane direction. Full, partial (to a certain depth) and sequential (consecutive partial steps to full penetration) blanking experiments are performed on a laboratory blanking apparatus to correlate the out-of-plane material characteristics with the in-plane ones. The well-established in-plane approach to damage is introduced for the out-of-plane direction to determine the isotropic Lemaitre damage variable. Furthermore, yield and ultimate shear stresses are determined and correlated to their respective in-plane counterparts, offering a new insight in the sheet-metal blanking process. UR - https://www.sv-jme.eu/article/identification-of-out-of-plane-material-characteristics-through-sheet-metal-blanking/
@article{{sv-jme}{sv-jme.2014.2302}, author = {Bolka, ., Slavič, J., Boltežar, M.}, title = {Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {61}, number = {4}, year = {2015}, doi = {10.5545/sv-jme.2014.2302}, url = {https://www.sv-jme.eu/article/identification-of-out-of-plane-material-characteristics-through-sheet-metal-blanking/} }
TY - JOUR AU - Bolka, Špela AU - Slavič, Janko AU - Boltežar, Miha PY - 2018/06/27 TI - Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 61, No 4 (2015): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2014.2302 KW - cutting and forming, constitutive behavior, elastic-plastic material, mechanical testing, ductile damage, out-of-plane experiment N2 - The mechanical characteristics of sheet metals are typically identified in the in-plane direction, although the sheet-metal forming processes (e.g., blanking, deep-drawing) are normally applied in the out-of-plane direction. As the mechanical characteristics are not necessarily constant, their direct experimental evaluation through the forming process would enable material monitoring and process optimization, and, additionally, material characterization in the out-of-plane direction. Full, partial (to a certain depth) and sequential (consecutive partial steps to full penetration) blanking experiments are performed on a laboratory blanking apparatus to correlate the out-of-plane material characteristics with the in-plane ones. The well-established in-plane approach to damage is introduced for the out-of-plane direction to determine the isotropic Lemaitre damage variable. Furthermore, yield and ultimate shear stresses are determined and correlated to their respective in-plane counterparts, offering a new insight in the sheet-metal blanking process. UR - https://www.sv-jme.eu/article/identification-of-out-of-plane-material-characteristics-through-sheet-metal-blanking/
Bolka, Špela, Slavič, Janko, AND Boltežar, Miha. "Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 61 Number 4 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 61(2015)4, 217-226
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The mechanical characteristics of sheet metals are typically identified in the in-plane direction, although the sheet-metal forming processes (e.g., blanking, deep-drawing) are normally applied in the out-of-plane direction. As the mechanical characteristics are not necessarily constant, their direct experimental evaluation through the forming process would enable material monitoring and process optimization, and, additionally, material characterization in the out-of-plane direction. Full, partial (to a certain depth) and sequential (consecutive partial steps to full penetration) blanking experiments are performed on a laboratory blanking apparatus to correlate the out-of-plane material characteristics with the in-plane ones. The well-established in-plane approach to damage is introduced for the out-of-plane direction to determine the isotropic Lemaitre damage variable. Furthermore, yield and ultimate shear stresses are determined and correlated to their respective in-plane counterparts, offering a new insight in the sheet-metal blanking process.